Re: Extreme Powder Coating '65 C-10 Shop Truck
 

Same "rat time" Same "rat channel" ?! LOL!
Posted via Mobile Device

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

Pics from Lakeside Rods and Rides...

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

Coooool !
Posted via Mobile Device

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

Continued...

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

Continued...

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

The right side of dash is not finished, the Vintage air unit used up alot of space. Roger will finish right side dash in the next few weeks. Stay Tuned

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

Will you be doing away with the stock glove box on the far right? And do you think if you do you will be using the grab bar from the Impala also? I see you filled in the control area for the hvac from the Impala dash. What are you thinking for that? What are the seats from?
Man this beotch is gonna be F-ING KILLER!!!

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

Dirty Doug, The stock glove box door will be gone, we are having issues with the AC unit and we need some type on access door for the AC unit. It was a very tight fit. Roger did not expect that with the Vintage Air Gen.II unit.

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

The grab bar like on the 62 SS would be really cool ! Just a thought , didn't know if you were thinking about using one or not . What colors will the dash and metal be inside ?
Posted via Mobile Device

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

The interior rendering by Carter Hickman is posted above. But colors may change. We will powdercoat it stay tuned ????

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

Your definitely in good hands.....

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

How about the Mooneyes gas cap filling in the stock gas tank filler?

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

Which engine should I run?

327 Bored .030 comp cam / roller rockers or a LS-2 carburated with GM front dist. drive. ASA hot cam ???? undecided ????

Also will be running a T-56 from a 97 Trans Am with 3.73 rear gears ?

Both engines will look very Old Skool .


What you guys like the trick battery boxes ?

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

Greg, as much as I dig the LS series, from what you have told me about the build I cannot see anything but the old school 327. Yes we can make the LS look old but is kinda like making an old woman look young... yeah its cool but something aint quite right :haha: The 327 fits the build better, you have the 60's dash and keeping the wheels more traditional but bigger. Just my thoughts my man, I will call you later this week or early next week.

Carter

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

Carter,

Kinda the same thing Roger Burman said. The 327 is setting in the chassis now and i agree does fit the build better. But it also would be nice to have that killer LS-2 power????

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

I think it would be easier to make the 327 "fit" the build... but I am a HUGE fan of the LS. I think you could pull off the LS, and I think it would be worth it.

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

I could make it a GMC and make the LS look like a GMC v-6 ???

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

327 ! Use the LS in the wagon. Also when I did the math/calculations on my ElCamino with the T56 and a 27.5 ish tire , I will be able to use a 4:56 gear and only run 2100 RPM at around 75mph , if I remember right. I did the calculation off of a web site 3 years ago. They make a S10 rear with a 4:10 gear. That 6th gear is like a double over drive. But the 327 would be a cooler piece in that shop truck!

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

This is a real nice start, kart34. I am along for the ride. I would go with the 327 for this build and send me the LS.:lol::lol:

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

66 C-10 Project next one in line / also scored a big back window cab cut:metal:

20 inch Dodge steelies with 1970 nova poverty cap undecided if we will use these or not. The bolt pattern kinda sucks and the rims are very heavy. I am having Delmo work on some pricing on those slick Centerlines Smoothies.

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

Our first project 1967 Buick Sportwagon designed by Jason Rushforth
It has been a showcase for our powdercoating business . The car has 145 powdercoated parts.


Howe brake caliper for the c-10 project

more chassis photos next week

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

We are going to work hard this week and get all the chassis mods. done , finish mounting rear fuel tank / air ride tanks etc.

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

nice wagon,

they are hot these days

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

Yes, Thanks The Buick has done a great job advertising for my powdercoating shop. It has been featured in Car Craft and Hot Rod mag. plus 2 Good- Guys builder choice awards. More photos on my website and my Hub Garage site.

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

New Pic

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

I agree

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

327 get's my vote..i was jus read tha old article on that wagon last night...that thing is sweet is sweet i know this will be tha same & props on keepin it a long bed..

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

Shoot those *****es Argent Silver!

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

Thanks Guys ... Just got back from Lakeside Rods and Rides. Roger Burman and crew have done a very impressive job on the 61 Impala dash install .

The center console is about finished and the engine turned door and kick panels are next. The engine turned dash insert looks killer with the Classic Instrument pinstriped gauges . Photos comming soon ! ;)

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

327

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

yes kinda thinking 327 also with a little twist ? maybe a Fast EZ-EFI set up but have it hidden under a 70 vette duel snorkel air cleaner? ;)

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

That's how I planned to do mine (silver).

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

I like the Centerline solids. Paint the insides white or a darker blue or something... It will be killa MoFo !

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

Dash Insert Engine Turned by Wiz of Lakeside Rods

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

Engine Turned Insert
Slides out to access A/C Unit

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

Mock Up of Console and Pics of the Porterbuilt Hood Hinges

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

Very nice Kart !
Posted via Mobile Device

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

yesssssssssssss

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

Heck yeah on that dash!

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

New Shop Truck Designs By Carter Hickman