![]() |
Re: Dynatech MuscleMaxx Headers
Quote:
|
Re: Dynatech MuscleMaxx Headers
329-740-29310 is what it says on the invoice. I'll post pics when they get here. They're supposed to arrive on Friday.
|
Re: Dynatech MuscleMaxx Headers
That part number says they are for a small block chevy
|
Re: Dynatech MuscleMaxx Headers
You're right. I just called FedEx and had them turn the shipment around to Jegs. softballnrd27, I owe you a beer. You probably just saved me 40-50 bucks in shipping that I would have had to pay if they had gotten all the way to my house. Thank You!
|
Re: Dynatech MuscleMaxx Headers
Not a problem, I was going to get the steps too but when I looked at the part number it was SBC not LS. I have only been able to fnd the 67-69 part number but I don't know if they will fit or not. Good thing is that I have 6 months to wait.
|
Re: Dynatech MuscleMaxx Headers
several stepped ones are available for a sbc. Dynatech's available LSx headers are not stepped, and not painted...they come coated only, and for $399. Dynatech's SuperMaxx series for new/newish factory LSx powered cars is also available but they start at like $859!
Part#'s from the Dynatech 2001 catalog for '70-'81 Camaro are: 1 7/8" x 3" LSx coated header- #715-29410 w/3" reducers 1 7/8" x 3" LSx coated header - #715-19410 w/2.5" reducers Part#'s from the Dynatech 2001 catalog for '67-'69 Camaro are: 1 7/8" x 3" LSx coated header- #715-21410 w/3" reducers 1 7/8" x 3" LSx coated header - #715-11410 w/2.5" reducers Part#'s from the Dynatech 2001 catalog for '68-'74 Nova (same as 1st gen Camaro?)are: 1 7/8" x 3" LSx coated header- #715-21410 w/3" reducers 1 7/8" x 3" LSx coated header - #715-11410 w/2.5" reducers |
Re: Dynatech MuscleMaxx Headers
The problem is that Speedway Motors is out of the 70-81 Camaro swap headers and the only other place I can find them is Jegs for $719. Do you know of anywhere else that has them for $399?
|
Re: Dynatech MuscleMaxx Headers
Summit sells them for $399 and lists a 4/13 ship date if bought today.
http://www.summitracing.com/dynatech |
Re: Dynatech MuscleMaxx Headers
1 Attachment(s)
Any idea of the length of the black line? Thanks :metal:
|
Re: Dynatech MuscleMaxx Headers
Do you have your body on yet? Was wondering if they cleared the shifter linkage.
|
Re: Dynatech MuscleMaxx Headers
Quote:
installed now....but I'll try to get you a measurement next time I'm under it. |
Re: Dynatech MuscleMaxx Headers
Thanks man, I would appreciate it...
|
Re: Dynatech MuscleMaxx Headers
Quote:
|
Re: Dynatech MuscleMaxx Headers
Thanks, thats would put me flush with the bottom of my frame rails if measured from the top of the exhaust ports.
Did I read you were interested in selling them? |
Re: Dynatech MuscleMaxx Headers
I will be....when I can afford to buy a set of the DT large tube 67-72 LSx headers (they fit better with my long range plans) I'll be selling these Dynatech's.... unless I buy something else to put them on. :lol:
|
Re: Dynatech MuscleMaxx Headers
Quote:
|
Re: Dynatech MuscleMaxx Headers
here's how they look on a stock truck w/engine at roughly normal (for an LSx) height.
http://www.lsxtruck.com/gallery/albu...l_IMG_1506.jpg I plan on a complete coil over IFS at some point...meaning I'll probably need the clearance the DT's provide. |
Re: Dynatech MuscleMaxx Headers
mac72, thanks for the input, bud.
|
Re: Dynatech MuscleMaxx Headers
Your welcome,my clips off so if you need any measurements or pics let me know.I was sceptical about purchasing them at first because of ground clearance issues until i found that they are higher up than my pan.Just something to consider
|
Re: Dynatech MuscleMaxx Headers
I can't seem to find the headers 68gmccustom used does anyone know the difference in the 67-69 camaro ones? I really wanted to use these but summit's website says not available.
|
Re: Dynatech MuscleMaxx Headers
Mac, they are higher than your pan? How tall is you pan?
|
Re: Dynatech MuscleMaxx Headers
Found the 715-19410 and the 715-29410 both thinking about the first ones due to only having a stock 5.3 and the smaller tubes might give me more room.
|
Re: Dynatech MuscleMaxx Headers
Quote:
|
Re: Dynatech MuscleMaxx Headers
Ok, so the DT Big Tubes don't fit. Passenger side hits on the firewall bad. I'm placing to links below, could you confirm 68GMC these are what your running?
http://www.summitracing.com/parts/DTC-715-29410/ http://www.dynatechheaders.com/m_camaro_70_81.html Might have to click on LSX on the second link. Thanks Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help. |
Re: Dynatech MuscleMaxx Headers
those on the Dynatech page look like the ones but it appears they changed the part number as they were 115-909400 (30C) when I bought. Also they're not stepped, just straight 1 7/8" primaries x 3" collectors. The Summit pics show stepped and #5 cylinder passing over behind #7....unlike Dynatech's pic.
Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help. |
Re: Dynatech MuscleMaxx Headers
I found out you can not go by pics on the web to determine what they are selling you.
Posted via Mobile Device |
Re: Dynatech MuscleMaxx Headers
very true!
|
Re: Dynatech MuscleMaxx Headers
Anyone want to swap?
|
Re: Dynatech MuscleMaxx Headers
can't BigShoe....notice our posts above were changed with some words deleted? I guess maybe so, since now it shows you as Premium. I did that for a few years until I felt the site was large enough to support itself.....now I refuse to.
sorry. |
Re: Dynatech MuscleMaxx Headers
Kurt,
No worries. I went ahead and ordered a set of the Dynatech's. Hopefully I can sale the DT's and the Dynatech's will fit! |
Re: Dynatech MuscleMaxx Headers
Good luck...I hope they work out for you.
|
Re: Dynatech MuscleMaxx Headers
Ordered mine yesterday coming direct from dynatech
|
Re: Dynatech MuscleMaxx Headers
dkauffman, really? I called and emailed and didn't get a response. I am always dumbfounded why more manufactures don't sale direct. I just hope get what I ordered and they fit!
|
Re: Dynatech MuscleMaxx Headers
They got here today. I ordered 715-19410 from sumit and they were drop shipped from dynatech in 2 days. Summits website says $55 to ship them and I asked my salesman about that and it was wrong it was only $9.50.
|
Re: Dynatech MuscleMaxx Headers
1 Attachment(s)
They worked!
|
Re: Dynatech MuscleMaxx Headers
sweet...we need more info and pics man...
|
Re: Dynatech MuscleMaxx Headers
yes more pics! what oil pan are you running?
|
Re: Dynatech MuscleMaxx Headers
BigShoe24, I sent you a pm
|
Re: Dynatech MuscleMaxx Headers
Has anyone tried the 70-81 or 67-69 camaro dynatechs on a squarebody? I tried a set of pacesetter headers for a 98-02 F-Body and they didn't fit at all on the driver's side.
|
Re: Dynatech MuscleMaxx Headers
Quote:
|
All times are GMT -4. The time now is 09:15 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com