Re: Project C-10 SS
 

Thanks . That's a clean set up there . I get some pics of how my exhaust is on the truck here Today. I can't wait to get mine running too its been to long since I heard the should of that turbo spool up
Posted via Mobile Device

Re: Project C-10 SS
 

Here is a few pic of my exhaust down pipe of the turbo Attachment 1101993Posted via Mobile Device
Posted via Mobile Device
Posted via Mobile Device

Re: Project C-10 SS
 

Exhaust Attachment 1101994Posted via Mobile Device
Posted via Mobile Device

Re: Project C-10 SS
 

What turbo is that? It has an interesting compressor cover, with the outlet turned parallel to the inlet.

Re: Project C-10 SS
 

It's a Holeset hx35 off a 2008 cummins
Posted via Mobile Device

Re: Project C-10 SS
 

Well got bored of doing all the moving stuff. So I took a break and put my intake set up all together just to tease myself lol Attachment 1107933Posted via Mobile Device
Posted via Mobile Device
Posted via Mobile Device

Re: Project C-10 SS
 

Well started to work on the truck again

Started build a power lift tonneau cover for the truck. Not sure if am going to sheet in aluminum or make a carbon finer sheet for it yet Attachment 1225235

Re: Project C-10 SS
 

Re: Project C-10 SS
 

Also got my moto back together :metal: been way to long since it looked like something under the hood Attachment 1225239

Re: Project C-10 SS
 

Been slowly working away on the motor getting it all the boost lines and fuel lines done Attachment 1253290

Re: Project C-10 SS
 

Attachment 1576486Well it's been awhile and well a lot has changed on the truck . Rebuild all the rear suspension to one off design I came up with running on ride tech coil overs. No limit wide ride ifs set up front. Ditched the auto for a t-56, new turbo set up, March pulleys, custom rad set up and cleaned up the motor bay even more. Colour changed the interior. No key ignition system. Custom bed floor and sheet metal work under way at the moment. Built a custom fuel cell that has a hidden tank for meth injection since the whole match injection system is hidden on the truck. Will get some pics posted up here soon. My Instagram is the most current with what I gots going on for those who are on it @highclassredneck is my user name

Re: Project C-10 SS
 

I'll be sure to follow on IG. I have the same problem not updating my build thread compared to posted pictures on mine haha

Re: Project C-10 SS
 

okay will try to do this in best order I can remember. heres when I started doing the front suspension swap out to no limit wide ride ifs, wasn't just a simple swap due to my frame being fully boxed so had to get creative on the install but all went straight forward and was happy with the out come.
Attachment 1577082
Attachment 1577083
Attachment 1577084
Attachment 1577085
Attachment 1577086

Re: Project C-10 SS
 

Attachment 1577096

Attachment 1577097

Attachment 1577098

Attachment 1577099

Attachment 1577100

Re: Project C-10 SS
 

got the front suspension pretty much all together here and the truck on the ground looking sweet. did ran into an issue with my turbo piping so new piping was to be required but ending up getting a crazy deal on another turbo soo new everything ended up happening Attachment 1577105

Attachment 1577106

Attachment 1577107

Attachment 1577108

Re: Project C-10 SS
 

here I started redoing all the turbo tubing , wasn't straight forward as i would liked it to be. had to modify the turbo heavily to work, welded all stainless v bands to the exhaust side housing to make better clamping system and to mount it. turbo wasn't clockable so remade the mounting bolt set up on the cold side and added v bands to inlet for the intake. made everything out of stainless of course Attachment 1577115

Attachment 1577117

Attachment 1577118

Attachment 1577119

Attachment 1577120

Re: Project C-10 SS
 

heres a pic of my y pipe to the turbo all header wrapped up and some more of the set up
Attachment 1577121

Attachment 1577122

Attachment 1577123