The 1947 - Present Chevrolet & GMC Truck Message Board Network

Page 2 of 4

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960-1966 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=7)

- - NC Parting out a 62 c10 (https://67-72chevytrucks.com/vboard/showthread.php?t=585862)

jcramsey

07-08-2013 08:58 AM

Re: Parting out a 62 c10

Quote:

Originally Posted by scott's69 (Post 6160522)

How about the tailgate?
Posted via Mobile Device

I think the tailgate might be a little rough. I'll send you my brothers info and you can get in touch with him to make sure.

jcramsey

07-08-2013 09:02 AM

Re: Parting out a 62 c10

Quote:

Originally Posted by Rusty Wrenches (Post 6161523)

Does that have a high hump trams tunnel?
Posted via Mobile Device

Does not have a high hump tunnel

1963c-10

07-15-2013 08:49 AM

Re: Parting out a 62 c10

How about the rock guards that go on top of the rear bumper brackets?

jcramsey

07-15-2013 09:00 AM

Re: Parting out a 62 c10

Quote:

Originally Posted by 1963c-10 (Post 6173788)

How about the rock guards that go on top of the rear bumper brackets?

Should still have them. PM'ing you my brothers contact info!

jcramsey

07-24-2013 02:24 PM

Re: Parting out a 62 c10

Bumper brackets are sold.

Please let me know if you've asked for something and I havent PM'ed you my brother's contact info!

jcramsey

08-07-2013 03:22 PM

Re: Parting out a 62 c10

Still got a few good parts left. Dash, switches, steering wheel, gas tank, front bumper, grill. Maybe more, just ask.

bigblock79

08-09-2013 12:23 AM

Re: Parting out a 62 c10

what would u take for the cab and dash

jcramsey

08-09-2013 10:05 AM

Re: Parting out a 62 c10

Quote:

Originally Posted by bigblock79 (Post 6211945)

what would u take for the cab and dash

PM'ing you my bro's contact info. They just had their first baby yesterday so he might not get back to you immediately :lol:

riot936

08-20-2013 07:22 PM

Re: Parting out a 62 c10

Are the door mirrors good? Not concerned with rust.
Posted via Mobile Device

jcramsey

08-21-2013 09:46 AM

Re: Parting out a 62 c10

Quote:

Originally Posted by riot936 (Post 6230801)

Are the door mirrors good? Not concerned with rust.
Posted via Mobile Device

Just sent my brother a text to let him know you were asking. I'll PM you his contact info as well.

ACK	08-22-2013 08:27 PM

Re: Parting out a 62 c10

Is the jack holder and the hooks for the spring that hold it in place available? Thanks.

jcramsey

08-22-2013 09:20 PM

Re: Parting out a 62 c10

Quote:

Originally Posted by ACK (Post 6234072)

Is the jack holder and the hooks for the spring that hold it in place available? Thanks.

Will find out and let you know. Thanks!
Posted via Mobile Device

jcramsey

08-26-2013 10:01 AM

Re: Parting out a 62 c10

Quote:

Originally Posted by ACK (Post 6234072)

Is the jack holder and the hooks for the spring that hold it in place available? Thanks.

Truck didnt have the jack holder, sorry.

jcramsey

08-26-2013 10:04 AM

Re: Parting out a 62 c10

Quote:

Originally Posted by riot936 (Post 6230801)

Are the door mirrors good? Not concerned with rust.
Posted via Mobile Device

Just sent you a PM riot.

BOXER957

08-26-2013 12:43 PM

Re: Parting out a 62 c10

Do you still have the rear fenders and or front inner fenders?

jcramsey

08-26-2013 01:00 PM

Re: Parting out a 62 c10

Quote:

Originally Posted by BOXER957 (Post 6239371)

Do you still have the rear fenders and or front inner fenders?

Still got them....fairly rusty if I recall.

BOXER957

08-26-2013 01:09 PM

Re: Parting out a 62 c10

any way of shooting me some pics.? surface rust I don't care about, any rot through is what I need pics of. If you want to snap some with your phone I can pm you my # thanks

chakah

08-26-2013 09:06 PM

Re: Parting out a 62 c10

Is the front bumper still available? If 62Barnfind passes I'm interested, thanks

jcramsey

08-27-2013 08:00 AM

Re: Parting out a 62 c10

Quote:

Originally Posted by chakah (Post 6240130)

Is the front bumper still available? If 62Barnfind passes I'm interested, thanks

Still got the front bumper. Will send you my brothers contact info.
Posted via Mobile Device

BOXER957

08-28-2013 10:48 AM

Re: Parting out a 62 c10

Quote:

Originally Posted by ACK (Post 6234072)

Is the jack holder and the hooks for the spring that hold it in place available? Thanks.

I have jack,hooks and spring if you're still looking

62 Barnfind

08-31-2013 03:15 AM

Re: Parting out a 62 c10

I'm still interested in the front bumper and I would like the frane horns if he will cut them off? How much for all of it?

jcramsey

08-31-2013 12:01 PM

Re: Parting out a 62 c10

Quote:

Originally Posted by 62 Barnfind (Post 6246648)

I'm still interested in the front bumper and I would like the frane horns if he will cut them off? How much for all of it?

He will definitely cut them off. I will PM you his info, he said to give him a call.

jcramsey

08-31-2013 09:12 PM

Re: Parting out a 62 c10

Think my brother stripped off the rest of the decent parts today before the body goes to the scrap yard. Got some heater delete plates, gas tank, cowl. Make an offer!

ACK	09-01-2013 09:24 AM

Re: Parting out a 62 c10

Quote:

Originally Posted by BOXER957 (Post 6242371)

I have jack,hooks and spring if you're still looking

BOXER957 - PM sent. Thanks!

riot936

09-01-2013 10:58 AM

Re: Parting out a 62 c10

He say what he wants for the cowl?
Posted via Mobile Device

jcramsey

09-01-2013 04:24 PM

Re: Parting out a 62 c10

Quote:

Originally Posted by riot936 (Post 6248221)

He say what he wants for the cowl?
Posted via Mobile Device

$20 + shipping

rawraw67

09-01-2013 08:05 PM

Re: Parting out a 62 c10

1 Attachment(s)

what about the lower radiator cradles? they are mounted on the frame

jcramsey

09-01-2013 09:29 PM

Re: Parting out a 62 c10

Ill ask him about the radiator cradles tomorrow

60ShortStepGMC

09-02-2013 11:54 PM

Re: Parting out a 62 c10

PM Sent.

60ShortStepGMC

09-03-2013 12:08 AM

Re: Parting out a 62 c10

Quote:

Originally Posted by 60ShortStepGMC (Post 6250892)

PM Sent.

Oops, broke forum policy.
PM'd regarding whether or not torsion bar washer and spacer might be available (ones near the adjusting bolt head).

jcramsey

09-03-2013 09:16 AM

Re: Parting out a 62 c10

Quote:

Originally Posted by rawraw67 (Post 6248905)

what about the lower radiator cradles? they are mounted on the frame

He does not have the lower radiator cradles, sorry.

jcramsey

09-03-2013 09:17 AM

Re: Parting out a 62 c10

Quote:

Originally Posted by 60ShortStepGMC (Post 6250910)

Oops, broke forum policy.
PM'd regarding whether or not torsion bar washer and spacer might be available (ones near the adjusting bolt head).

PM'ed you my brothers contact info. He still has a washer and spacer I believe.

DREAMER1

09-09-2013 12:48 AM

Re: Parting out a 62 c10

Did somebody get allot the dash and gauges after all?
Posted via Mobile Device

rdlackey

09-09-2013 05:37 AM

Re: Parting out a 62 c10

1 Attachment(s)

Looking for the ebrake chassis equalizer bar that mounts on transmission crossmember. See pic.
Posted via Mobile Device
Posted via Mobile Device

jcramsey

09-09-2013 08:40 AM

Re: Parting out a 62 c10

Quote:

Originally Posted by DREAMER1 (Post 6260291)

Did somebody get allot the dash and gauges after all?
Posted via Mobile Device

Still has the dash with ash tray, glovebox door and guages. Heater controls were sold and my brother is keeping the switches.

Pm'ing you his info.

jcramsey

09-09-2013 08:54 AM

Re: Parting out a 62 c10

Quote:

Originally Posted by rdlackey (Post 6260407)

Looking for the ebrake chassis equalizer bar that mounts on transmission crossmember. See pic.
Posted via Mobile Device
Posted via Mobile Device

Pretty sure he has it. PM'ing you his info.

jcramsey

09-19-2013 10:41 AM

Re: Parting out a 62 c10

front bumper is gone to its new home with 62 Barnfind

paulspickupparts

09-19-2013 10:51 AM

Re: Parting out a 62 c10

Do you still have the heater delete plates on he firewall . If so I am interested. Thanks

jcramsey

09-19-2013 10:54 AM

Re: Parting out a 62 c10

Quote:

Originally Posted by paulspickupparts (Post 6276510)

Do you still have the heater delete plates on he firewall . If so I am interested. Thanks

Yes they are still available. I'll send you my brothers contact info and he can get you a price. Thanks!

ClemsonChevy

09-19-2013 01:49 PM

Re: Parting out a 62 c10

Does he still have the drivers rear fender?

All times are GMT -4. The time now is 02:57 PM.

Page 2 of 4

Show 40 post(s) from this thread on one page