|
Re: 72 Blazer part out
Please post detailed pics of exactly what you need with meaurements. Ty
Quote:
|
Re: 72 Blazer part out
I wish I could teleport what's left of your bed floor and front floor pans to Pittsburgh, it's even the right color...nuts. If there is some way to ship whatever is left of the floor, even in sections, after everything else is spoken for please let me know.
|
Re: 72 Blazer part out
Quote:
|
Re: 72 Blazer part out
Quote:
Thanks Eric |
Re: 72 Blazer part out
1 Attachment(s)
The sheet metal in the circle that goes under blower motor and up to cowl area. Cut outside of its seam along the fire wall. Thanks
|
Re: 72 Blazer part out
I am interested in both tail light pieces and a couple of inches forward from there.
|
Re: 72 Blazer part out
interested in both pillar door rear openings along with rocker box reinforcement panel. will try and send pictures tomorrow.
Thanks eric |
Re: 72 Blazer part out
I am interested in the drivers rear corner, I am looking to install a blazer fuel tank in my C10 and would like the section including the piece on the floor that has the holes for the filler neck and vent tube. I believe the original hole is under the bond near top. I would like the piece from right behind the rear tire tub to the end.
I am also interested in the vent tube and mounts depending on the condition of the three lines coming out of the bottom. Looking for a price for the clutch block off plate Also do you have a charcoal canister/bracket Thanks Joe |
Re: 72 Blazer part out
3 Attachment(s)
Quote:
Attachment 1228797 Both rocker box support panels (picture is looking in the rear wheel well looking toward the cab. Attachment 1228798 And last but not least the both floor support pieces (picture is looking rearward into the rocker box) Attachment 1228799 What condition are these pcs in (pictures would be great!) and how much shipped to 48623 Could you throw in the passenger vent flap and vaccum canister into that as well (From you previous post) Thanks, Eric |
Re: 72 Blazer part out
Do you still have the windshield frame? If so, how much?
|
Re: 72 Blazer part out
Please hang in there everyone, i just removed it from my trailer and began to start un bolting..Will take a little bit of time. I will be able to spend a few hours on it Thursday morning before going into work and again Saturday.
|
Re: 72 Blazer part out
I do, and the a pillar can be cut to your specifications.
"Windshield Frame $400 plus shipping" Quote:
|
Re: 72 Blazer part out
Thanks for the up date, no worry here .
|
Re: 72 Blazer part out
Can I get the wiper transmission arm clip and if so how much to 74066.
|
Re: 72 Blazer part out
This right?! Sorry only pic I had shows two of them...
http://i163.photobucket.com/albums/t...ps7jacvih9.jpg Quote:
|
Re: 72 Blazer part out
Quote:
Good morning! Any luck on part removal over the weekend? Thanks, Eric (1972 Jimmy) |
Re: 72 Blazer part out
What is the deal on the mirror? Have you shipped it out yet? Can i get some tracking info?
Thanks |
Re: 72 Blazer part out
Quote:
|
Re: 72 Blazer part out
Any progress with tearing her down?
1) Rear side panel mount brackets - center top hat bracket type (there should be 6x) - floor and tailgate L bracket type (there should be 6x) 2) Firewall to rear wire harness 3) Rear bench rear hold down bracket and bolt Thanks Jim |
Re: 72 Blazer part out
What's the best you could do on the windshield frame/ I'm in Va. 20132?
|
Re: 72 Blazer part out
also interested in the windshield frame if it doesn't work out with ikesboy. I'm in Fresno, could possibly drive to you to pick it up
|
Re: 72 Blazer part out
I am out of town till Tuesday all, I will be able to get back to things ..Ty for the patience .
|
Re: 72 Blazer part out
$5 in an envelope for ya...
Quote:
|
Re: 72 Blazer part out
Windhield frame is $400 firm plus shipping and can be cut to need on the A pillar.
|
Re: 72 Blazer part out
1 Attachment(s)
I'm a little late in on the party here. Attached is a piece of metal I would like to get if your cutting it up. Would need shipped to 72120 home or 72116 business.
|
Re: 72 Blazer part out
i'll have to pass for $400. thanks tho
|
Re: 72 Blazer part out
Bump
|
Re: 72 Blazer part out
How about the rocker boxes? Rocker box end caps?
|
Re: 72 Blazer part out
pics of wheel wells removed, have been posted, lmk. Thanks Adam
Quote:
|
Re: 72 Blazer part out
These are all removed, I will add a picture or 2 tomorrow for you!
Thanks Adam Quote:
|
Re: 72 Blazer part out
I have posted more pics of the floor, I would need $80 shipped for your cut.lmk
Thanks Adam Quote:
|
Re: 72 Blazer part out
Might be able to ship reasonably via Greyhound...I have cuts already for another member that include 5" all the way around the wheel well openings both sides. LMK if this is still an option with considering what I stated above.
Thanks Adam Quote:
|
Re: 72 Blazer part out
I'll take the wheel wells, if you can do the cowl vent cut I would like to combine shipping. To make that cowl cutler simple I would take the whole corner of the cab, let me know, thanks referring to passenger side
|
Re: 72 Blazer part out
Hi just wondering if you have the windshield washer spray nozzles would be interested in them
|
Re: 72 Blazer part out
Still in for section of cab floor
|
Re: 72 Blazer part out
That wasn't me interested in the cab floor
|
Re: 72 Blazer part out
I believe so, I will confirm for you tomorrow...
Quote:
|
Re: 72 Blazer part out
Yes sir, getting close to cutting time!!
Quote:
|
Re: 72 Blazer part out
ok, I didnt see anything that had confirmed you saw my post. Plus letting you know I was still interested.
|
| All times are GMT -4. The time now is 01:52 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com