Re: Finally Starting
 

Attachment 1604734i was bored and needed something to do in the shop so I cut the floor out of the cab. I drilled the tacks out on the back and left a small piece on the front. It'll make it easier to drill the last tacks out of the front.

Re: Finally Starting
 

Attachment 1626716

Attachment 1626717

Attachment 1626718

Attachment 1626719

Been working on the driveline. I kind of goofed up. I had a guy rebuild the transmission and when he got finished I mated the engine and tranny together and put it in the frame. After I was done I decided to button everything up and found out that he ordered me the wrong bolt pattern on the tc.

Re: Finally Starting
 

Attachment 1626720
I needed some inspiration to keep going so I at least set the inner fender wells in place for a little bit.

Re: Finally Starting
 

Attachment 1633702

Attachment 1633703

Attachment 1633704

Attachment 1633705

Attachment 1633706
Got a little more work done this week. I got the shocks, stainless brake lines, the rear bumper brackets and the rear bumper all installed. I want to get the exhaust done but I wanted everything that the exhaust guy is going to have to dodge and work around on instead of me working around his pipes.

Re: Finally Starting
 

Inspired....

Re: Finally Starting
 

Looking great!

Re: Finally Starting
 

Did you buy or bend your own ...fuel ,,brake lines??

Re: Finally Starting
 

The fuel line is factory minus a couple inches to allow for the electric fuel pump on the middle cross member. The brake line is a stainless set from inline tube.