Re: 1967 C30 Napco 4x4 questions
 

7oldno I might be interested I would really appreciate it

Re: 1967 C30 Napco 4x4 questions
 

respectfully unsubscribed ,I don't want to know what happens to it .:smoke:

Re: 1967 C30 Napco 4x4 questions
 

oh brother.
I think a fleetside would look great on it. Good luck with your rebuild, can't wait to see how it comes along.

Re: 1967 C30 Napco 4x4 questions
 

Grumpy don't get upset I might do a flatbed or a better dump bed still weighing the options

Re: 1967 C30 Napco 4x4 questions
 

It's your truck to do what you like. But I agree turning it into a pickup would castrate that truck. There's more to trucks than pickups. All the car converts only like pickups because they need it pretty from bumper to bumper, like a car. It's cool when a truck can do that, but it's also cool for a truck to be all truck and look good doing it, at least to a truck guy it is. It's not like a 4wd Longhorn hasn't been done before either. You could stretch the frame on any 8' K/20 for a much more driveable 4wd pickup

Re: 1967 C30 Napco 4x4 questions
 

I will take a little drive tom and see if its there. i think it will still have the cool factor no matter what you decide to do, it will always be a napco. Just make sure you hang on to all the original parts incase you change your mind later down the road. i would also take lots of photos before you disassemble anything

Re: 1967 C30 Napco 4x4 questions
 

I agree with the possibility of leaving it alone guys just looking at some other options I'm not going to be hauling much with it at all it'll have an easy life. I've attached another picture of my other 67 c30 just about as original as it gets has roughly 71000 on clock if I remember correct never been repainted I just cleaned it up and left it alone and drive it. What do you guys think of it?

Re: 1967 C30 Napco 4x4 questions
 

And the other side

Re: 1967 C30 Napco 4x4 questions
 

It's your truck build it how you want !

Let's see the side by pics .

Re: 1967 C30 Napco 4x4 questions
 

Seems like an unethical series of events went down, what a cluster job.

Re: 1967 C30 Napco 4x4 questions
 

The guy I bought the truck from told me when I picked it up that the gentleman from Indiana wanted him to give him his word that it was sold but he wouldn't until he had spoken with me since I contacted him earlier in the week. I've had a few people upset at me for sneaking in and buying it? When I was the one originally interested I'm sorry if some people are upset but the seller was a legitimate guy and was tired of craigslist associated bs. In the end the truck will get restored and another napco will live for the next generation to enjoy. I'll keep everyone up to date on here of progress. Thank you

Re: 1967 C30 Napco 4x4 questions
 

This thread went all over the place. My post# 32 shows that. Until the third page it looked like all were screwed out of it. At first I wasn't sure if someone sniped it as a result of your post here or if that was already in motion before you posted. It sounded like the guy was promising everyone and coming through for none...at least here. After all that I see it suggested that you should have offered more and that really put a burr under my saddle. So, it turns out you made the deal. I guess your question got answered in actions as well as words. This truck in particular was very "desired". Had I known it never sold last year it would have been sitting here since the end of April when I sold my '85 Jimmy.

I had a '71 C/30 SRW NAPCO that got stolen from the place that removed my utility body (sold it) and was looking for a used contractor dump set-up made for SRW. It already had a plow. I was going to retire it to the family farm up in the mountains to work firewood, clear snow out to the road, and general bopping around in the perfect mountain chore boy. I envisioned this as it's replacement. I would restore it, use it with care, and take it to antique truck shows, as well as car/pickup shows. I did that in my '71 wrecker a few times and it was a big hit! That is such a cool truck and very very special. It is an absolute custom truck from 1967. Custom doesn't always mean fancy, especially in the truck world

Re: 1967 C30 Napco 4x4 questions
 

Thank you special k I actually purchased the truck for less than the asking price I don't wish to disclose how much just will say it was south of $2500. I'm sorry if anyone has bad feelings towards me or the truck but un the end it will be a useable truck here at home so anyone wants to see her please contact me. Weather forecast shows high of 2 degrees here today so no pictures but next week if it warms up some I'll get some shots of her thanks.

Re: 1967 C30 Napco 4x4 questions
 

Glad it went to the OP, doo142. I never tell a soul about the trucks I get until they are at my home. Lost to many to loose lips and Snake like people.
Can't wait to see lots of pictures

Re: 1967 C30 Napco 4x4 questions
 

I'll make this simple... On my word he gave me his "word", that you can take to the bank. Odd that it meant so much to you when it's clear by your first post you were clueless to what you were even looking at. With the trusted help of this board you went from 0 to 100 and jumped back in action to make it happen. Further more he mentioned me as a buyer to you but ,when I asked if he had any one serious he said "no only tire kickers". One more fact, he apologized repeatedly and you answered me In this thread as a third party..... I think both of you knew exactly what went down!!! The least you could do is support the board that helped you by becomeing a member

Re: 1967 C30 Napco 4x4 questions
 

I read all 3 pages of this and my 2 cents dl21smith was first in line and it looks like doo142 was sniping it. I don't know if this is true and I'm not trying to upset anyone but that's the way it looks. I don't know where the 0 to 100 comes from as dl21smith NEVER stated he wasn't interested in it and was asking for information to validate the purchase. He also stated he had an agreement with him before you did doo and even tried to warn you.

I'm sure neither one of you knew what was going on in the background with this guy and you were just playing the cards dealt. Time to get over it and be glad it went to someone on here that is going to take care of it.

Re: 1967 C30 Napco 4x4 questions
 

Anyone care to expound upon that?

Re: 1967 C30 Napco 4x4 questions
 

It hard because I had big plans to chop it, bag it with a big C notch, go to 1/2 ton five lug, chop the frame to swb length with fake patina. Would have been cool!!! Lol ,this will give us something fun to talk about. Peace !!!

Re: 1967 C30 Napco 4x4 questions
 

OMG, grumpy old man said he was out because the op had thought about putting a longhorn bed on the truck. DOO if you were gonna CHOP, CUT, C-NOTCH, BAG, this truck then i am happy as hell you didn't get it. I like a lower stance on our trucks but to ruin a NAPCO by doing this makes me sick to my stomach!!!

To each their own i guess.

Re: 1967 C30 Napco 4x4 questions
 

7oldno it definitely won't be bagged c notched lowered I promise that just can't decide on a bed it will remain a bad ass truck not a lowered c10.

Re: 1967 C30 Napco 4x4 questions
 

That was for fun, sorry thought it was obvious!!

Re: 1967 C30 Napco 4x4 questions
 

Not sure but my guess is that he may have been joking about cutting it up- just a crazy hunch

Re: 1967 C30 Napco 4x4 questions
 

d21smith i went to check out that truck this morning to take some pics, but unfortunately it isn't a longhorn like i had thought. It is a custom camper big block truck. I will send him a message and ask if he knows of any longhorn beds. He has a lot of stuff and would be the one to know of a longhorn. I would like to check it out but will wait a couple months for the weather
I will throw you my number just to have 217-331-8301{Mike}

Re: 1967 C30 Napco 4x4 questions
 

ok lol i guess I'm starting to get a little slow[my bad] as they say but that is a sick thing to say

Re: 1967 C30 Napco 4x4 questions
 

That truck is awesome hope you get it.

Re: 1967 C30 Napco 4x4 questions
 

Do tell lol...where would one catch a glimpse of this? I think these 1 ton napco's are neat!

Re: 1967 C30 Napco 4x4 questions
 

https://quincy.craigslist.org/cto/5445813363.html

back up for sale for a steal of a deal at double what he paid. asking 4500