Re: Dads 1966 C-10
2 Attachment(s)
More bed photos
|
Re: Dads 1966 C-10
3 Attachment(s)
Some detail photos. Boy this truck is shaping up nicely
|
Re: Dads 1966 C-10
3 Attachment(s)
Went to dads last Saturday to work out some kinks in the temp gauge. Helped him install the hood. We fired it up and let it warm up to operating temperature and the temp gauge is straight up dead center at 198 degees. I check the 2 speed electric fan for operation. The fan turns on at low speed at 198 and high speed At 201. As the engine cools down high speed turns off at 198 and low speed turns off at 194. It was 95! degrees in the shop and at idle the engine stayed between 194-198 without fail even with the hood closed.
|
Re: Dads 1966 C-10
1 Attachment(s)
Cab forward is done. But we found an issue with the rear axle assembly. First it has 2.56 gear set in it and in 4th gear (overdrive) it will run 1,400 rpm at 70MPH. This is a 10 bolt 8.5 out of a 1984 Chevy Silverado so that should explain the gear set. Take off and acceleration will be sluggish. Second the spider gears are toast so either a rebuild is in order or find a donor. We decided on either 3.73 gears which is 70 MPH @ 2200RPM or 3.55 gears that will be 1,900 there abouts @70MPH. My dad said he wants to finish up the rear axle and replace the shocks before installing the bed
|
Re: Dads 1966 C-10
Coming along very nicely. Personally I would go with 3.73's
|
Re: Dads 1966 C-10
Nice job guys...truck is looking good!
|
Re: Dads 1966 C-10
Damn fine job!! I like the build, great color combo too.
|
Re: Dads 1966 C-10
Wow, awesome job....it's looking great
|
Re: Dads 1966 C-10
Looking Great!
|
Re: Dads 1966 C-10
4 Attachment(s)
Went up and helped my dad fix the gas gauge so we could put the bed on. He had already relocated the gas tank under the bed of the truck so the gauge needed to be fixed first. So other than a radio the truck is ready. My dad decided he wants to go with steel wheels painted yellow with factory white hubcaps. It will look bone stock And will be such a sleeper
|
Re: Dads 1966 C-10
The truck looks fantastic! Your Dad did a first rate job on her!
|
Re: Dads 1966 C-10
Beautiful truck... Love the yellow!
|
Re: Dads 1966 C-10
Talked with dad and he said the front end of ol yellow was leaning towards the right so he installed a new set of coils in the front. It em did up lifting the truck up an inch but the front end is level now
|
Re: Dads 1966 C-10
4 Attachment(s)
A few more photos. Tailpipes installed now that the bed is on. The radio is being installed now with a nos Blaupunk knobby radio. Bed wood is kinda dusty from the polishing glaze.
|
Re: Dads 1966 C-10
1 Attachment(s)
Wood bed
|
Re: Dads 1966 C-10
5 Attachment(s)
Front end alignment is done and on the way home my dad hit his first show. Didn’t even wash it off because he didn’t plan on showing it off. Looks good with the whitewalls. Working on getting some white hubcaps to finish it off.
|
Re: Dads 1966 C-10
1 Attachment(s)
This is the plan. Hope it looks good
|
Re: Dads 1966 C-10
Truck looks great y'all did a fine job on it.
|
Re: Dads 1966 C-10
Awesome job! Love the gas tank and rearend!! LOL
|
1 Attachment(s)
Hubcaps cleaned up and painted. Got em off of this site. Truck looks nice out in the sun.
Posted via Mobile Device |
Re: Dads 1966 C-10
Looks great! Do the hubcaps install just like rally wheel derby caps?
|
Re: Dads 1966 C-10
Quote:
|
Re: Dads 1966 C-10
Quote:
|
Re: Dads 1966 C-10
Quote:
yea they just pop onto the nubs |
Re: Dads 1966 C-10
4 Attachment(s)
Here are some better shots of my dads truck looks so good:chevy::chevy::chevy::chevy::metal::metal::metal:
|
Re: Dads 1966 C-10
2 Attachment(s)
more eye candy
|
Re: Dads 1966 C-10
That is a top shelf build! very well done! I hope and pray mine will turn out half that nice. I found it funny how after he put the wheels and tires on it he decided to go back to stock. I have been slowly, and I mean slowly building my truck. The older I get the more I am changing back to stock. Something about the original look that gets me excited.
Love the truck, tell your dad well done! |
1 Attachment(s)
First place 55 up truck a couple weeks ago
Posted via Mobile Device |
Re: Dads 1966 C-10
Congratulations, fully deserved.
|
Re: Dads 1966 C-10
Truck looks great! Congrats to your dad and also you for helping to get it together. I have the same type of seat and have seen them installed in few trucks now, seems to be a great fit and easy way to get the 3pt belts.
|
Quote:
Posted via Mobile Device |
Re: Dads 1966 C-10
I'm with you there for sure. Power steering with smaller wheel and maybe tilt will be in my plans lol. Also going to remove tank from cab to get as much room as possible.
|
Re: Dads 1966 C-10
1 Attachment(s)
Cool shot of my dads 66 at a show.
|
All times are GMT -4. The time now is 03:37 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com