The 1947 - Present Chevrolet & GMC Truck Message Board Network

Page 2 of 2

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - CT 1969 CST/10 Part Out 4x4 (https://67-72chevytrucks.com/vboard/showthread.php?t=816890)

Leigh222

01-17-2021 09:48 AM

Re: 1969 CST/10 Part Out 4x4

Quote:

Originally Posted by Tripmiester (Post 8865400)

How is the inner and outer grille?

Grill is in decent shape inner was cut for plow controls, I'll post pics Monday.

68Custom

01-17-2021 02:13 PM

Re: 1969 CST/10 Part Out 4x4

Hello!

I am looking for a V8 clutch setup. Specifically the Z bar, ball stud with bracket on the engine, and frame bracket. Thanks!

Aaron

Stagerunner

01-17-2021 02:22 PM

Re: 1969 CST/10 Part Out 4x4

Where do the bucket seat rings go?

Leigh222

01-17-2021 02:28 PM

Re: 1969 CST/10 Part Out 4x4

Sound good aaron. I'll post pictures and price when I get them removed.

Leigh222

01-17-2021 03:03 PM

Re: 1969 CST/10 Part Out 4x4

Quote:

Originally Posted by Stagerunner (Post 8865550)

Where do the bucket seat rings go?

They go along the back of the inside of the cab to hold the factory carpet over the gas tank. I believe a full set is 10 or 12.

C10_ForDad

01-17-2021 04:29 PM

Re: 1969 CST/10 Part Out 4x4

Quote:

Originally Posted by Leigh222 (Post 8865114)

I'll check on the harness Monday as the truck is at my work. What do you need for the headlight assembly? Buckets, trim rings?

Yea, I'd need everything that mounts to the core support for the lights

Leigh222

01-18-2021 03:31 PM

Re: 1969 CST/10 Part Out 4x4

5 Attachment(s)

Quote:

Originally Posted by C10_ForDad (Post 8865095)

Is the headlight and front turn signal harness complete?

Thank you

Here are the headlight assembly, turn signal assembly and wiring harness. Does $110 shipped work for all of it? Harness has some splices from plow set up but all plugs are intact except for plug into firewall.

Leigh222

01-18-2021 03:33 PM

Re: 1969 CST/10 Part Out 4x4

5 Attachment(s)

Quote:

Originally Posted by Tripmiester (Post 8865400)

How is the inner and outer grille?

Pics of Grill

Leigh222

01-18-2021 03:35 PM

Re: 1969 CST/10 Part Out 4x4

Quote:

Originally Posted by 68Custom (Post 8865541)

Hello!

I am looking for a V8 clutch setup. Specifically the Z bar, ball stud with bracket on the engine, and frame bracket. Thanks!

Aaron

Here are all parts. Back bracket bolt was seized to had to use the torch. $70 Shipped?

68Custom

01-18-2021 03:40 PM

Re: 1969 CST/10 Part Out 4x4

Picture appears to be missing?

Leigh222

01-18-2021 03:44 PM

Re: 1969 CST/10 Part Out 4x4

3 Attachment(s)

Quote:

Originally Posted by Leigh222 (Post 8866187)

Here are all parts. Back bracket bolt was seized to had to use the torch. $70 Shipped?

Sorry don't know what happened there.

68Custom

01-18-2021 03:49 PM

Re: 1969 CST/10 Part Out 4x4

I'll take it. Was there a bracket on the engine block as well or was the stud just in the block? I'll send you a PM for payment details. Also, does the front axle appear to be original? Can you post a pic of the locking hubs, please?

Leigh222

01-18-2021 06:34 PM

Re: 1969 CST/10 Part Out 4x4

Quote:

Originally Posted by 68Custom (Post 8866194)

No other bracket on block just the ball stud. I'll get some pics of the hubs tomorrow the front axle appears to be original.

Leigh222

01-19-2021 11:47 PM

Re: 1969 CST/10 Part Out 4x4

2 Attachment(s)

Quote:

Originally Posted by blap (Post 8864443)

Yes I'm interested

T221 boot ring and knob.

Leigh222

01-20-2021 09:13 AM

Re: 1969 CST/10 Part Out 4x4

Radio, speaker and bracket SOLD

Clutch Z-Bar, pivot ball and frame bracket SOLD

Any offers on above listed parts?

Anybody else need anything?

68Custom

01-21-2021 08:30 AM

Re: 1969 CST/10 Part Out 4x4

I'll bite again. What's the condition of the front bumper brackets? Specifically the long brackets that mount to the sides. I don't need the small brackets on the top.

Thanks,

Aaron

Leigh222

01-21-2021 10:30 AM

Re: 1969 CST/10 Part Out 4x4

4 Attachment(s)

Quote:

Originally Posted by 68Custom (Post 8867405)

I'll bite again. What's the condition of the front bumper brackets? Specifically the long brackets that mount to the sides. I don't need the small brackets on the top.

Thanks,

Aaron

Aaron some pitting on the brackets. Does $55 shipped work?

68Custom

01-21-2021 02:18 PM

Re: 1969 CST/10 Part Out 4x4

I'll pass on them, thank you.

All times are GMT -4. The time now is 01:49 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page