Re: Do you need '64-'66 Chevy Truck Parts?
 

lilred66,

do you have an upper heater block off plate that bolt tot he firewall just beneath the cowl?

jeff

Re: Do you need '64-'66 Chevy Truck Parts?
 

Jeff:

Thanks for the inquiry. I have the both heater block-off plates. Do you need the long, slender block-off plate or the square block-off plate? I have both, so let me know.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Tony, I saw a picture in another thread at your shop, looked like you had tons of doors. What's the scoop on all of those? I need one for my '64, is that too big to ship? How many trucks do you have at your shop anyway? Also, I see it's called 4-5-6 chevy trucks, do you deal with 60-63 at all?

Re: Do you need '64-'66 Chevy Truck Parts?
 

Ron:

Good morning and thanks for the inquiry. I have accumulated several doors over the years, in varying condition...some not so good all the way up to pretty decent. If they are not too bad, I have them sandblasted, do the panel replacement and sell them as good, used, repaired door shells. I have a few on my workbench right now with repairs underway.

I have shipped door shells before, but it is rather pricey...to NY, via motor freight, delivered to a business, would be $80.00-$120.00, depending on the carrier.

I several 4-5-6 Chevy trucks of my own and I also work on 4-5-6 Chevy trucks at my shop. My truck stuff is a sideline hobby, but it has taken on an identity of it's own with all the parts I have acquired and sell on a few Chevy truck specific web sites, craigs list and eBay. I primarily deal with 4-5-6 Chevy trucks, but, as you know, some parts are interchangeable amoung all years '60-'66. I am the most familiar with 4-5-6 Chevy trucks and prefer them, but I like all the trucks from the '60-'66 era.

Please let me know if I can help you with any 4-5-6 Chevy truck parts in the future and thanks for the inquiry.

Re: Do you need '64-'66 Chevy Truck Parts?
 

I need the long slender one the goes just above the upper fire-wall lip that is just below the wiper cowl.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Replacement kit to restore the original "hard pipe" radiator hose arrangement found on the '64-'66 Chevy trucks with a 283 or 327 and three core or four core Harrison radiator.

The kit includes "factory-correct" hard pipe (1 each), starter hoses (2 each-1 at water inlet & 1 at radiator inlet) and hose clamps (4 each). The hard pipe is painted Underhood Black, like the original equipment.

The complete "hard pipe" radiator hose assembly is $40.00, plus $9.00, packaging & shipping, via UPS or FedEx (with tracking). I accept money order, cashiers check or PayPal (at dynamiccontracting@sbcglobal.net) and will ship kit within 24 hours of receipt of payment.

Here are a few pictures of this setup installed on my '66 Chevy C20 Custom Camper lwb fleetside truck with a factory 327 and a factory Harrison 4-core radiator. The last picture is the loose assembly, so you can see what is included. The kit will include the original style tower clamps, manufactured by Wittek Manufacturing Company, as used on all GM vehicles in the sixties and seventies.

Please let me know if you are interested in this item or other 4-5-6 Chevy trucks parts in the future.

Re: Do you need '64-'66 Chevy Truck Parts?
 

sorry, guess I missed this before..
will you be around the weekend of Feb. 21st?
I'll get the radiator parts, washer bracket, and one of those hose set-ups from you for a total of $80...and maybe some other stuff, if the budget allows...

Re: Do you need '64-'66 Chevy Truck Parts?
 

Joe:

Thanks for the heads-up. I will be around the shop on the 21st of Feb., so keep me posted of your travel plans. See you soon.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Cool,
Thanks Tony!!

Re: Do you need '64-'66 Chevy Truck Parts?
 

Sir,

Re: Do you need '64-'66 Chevy Truck Parts?
 

Sorry..

Sir,
i am in need of a new things. #1 is a 64-66 cab, doors (shell or loaded), and hood. I am looking for something that has not been crashed as far as the cab goes. For the doors, I'm looking for something to prep and paint, that goes for the hood as well. If I'm asking to much, please let me know. I know its hard to find that "perfect" used body part but any assistance would be much appriciated!

Doc

Re: Do you need '64-'66 Chevy Truck Parts?
 

Doc:

Good morning and thanks for the inquiry. I have a few very nice hoods.

The cab and doors I have need some work. I can do the patch panel installation and get them ready for bodyman, but they need some final prep, prior to going to paint.

It is very rare to come across good, used sheetmetal that is "perfect", unless it is factory take-off OEM stuff or NOS...I have neither and they go for a pretty penny or several pretty pennies.

I am currently repairing a good, used cab and a pair of doors for a fellow, so that is an option and I will do it at a reasonable price for the cost of panels and my labor.

Thanks for the opportunity and let me know if I can help you with these items or other 4-5-6 Chevy truck parts in the future.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Hey LilRed do you have a Tilt steering for a 64? that's floor shift? and how much, send me a PM or email to ruffrida2005@yahoo.com

Re: Do you need '64-'66 Chevy Truck Parts?
 

No such thing as a factory tilt steering for a '64. They weren't available with a tilt on the 4-5-6 Chevy trucks, but I know there are some direct bolt-in tilt columns, but I am not sure what years.

Sorry I couldn't help you with this item, but please keep me in mind for your other 4-5-6 Chevy truck parts needs.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Hey Red I need a oil pan for the 250 in my 66' C-10. Can you help me out? Thanks

Re: Do you need '64-'66 Chevy Truck Parts?
 

hey tony...i need to redo the whole front end suspension on my 66 c10...anything available???

Re: Do you need '64-'66 Chevy Truck Parts?
 

valero:

Good afternoon and thanks for the inquiry. By front-end suspension, do you mean the steering sector, including the center link, tie rod ends, tie rods, couplers, idler arm, Pitman arm or do you need the entire front-end meaning the front cross member, upper and lower control arms, ball joints, king pins, etc?

Please let me know what you need and I can provide photos of the good, used parts that I have from a 4-5-6 Chevy C10. Thanks for the opportunity and let me know your thoughts.

Re: Do you need '64-'66 Chevy Truck Parts?
 

pittdawg:

Good afternoon and thanks for the inquiry. I have a good, used oil pan from a '64 Chevy C10 250 six cylinder parts truck, but it is on a running engine, so I would rather not pull the pan, since it is a runner. I will check some other sources to see what I can come up with and let you know. Sorry I couldn't help you with this item, but please keep me in mind for your other 4-5-6 Chevy truck parts needs in the future.

Re: Do you need '64-'66 Chevy Truck Parts?
 

thanks for gettin back to me so quick tony...im actually gonna need all of it, lol!

everything is in working condition right now...but all the components are the originals from 66...so needless to say, the rust is abundant! even the shocks look like barnicle clad pier supports at the beach...haha:)

i guess just send me what you can and the prices and hopefully we can work somethin out...

thanks
sean

Re: Do you need '64-'66 Chevy Truck Parts?
 

lilred: i'm needing the reverse lights and antenna for a 66 fleetside. if you could provide some prices sometime that would be awesome.

thanks in advance,
Matthew

Re: Do you need '64-'66 Chevy Truck Parts?
 

hey, need a drivers side bed side, shorty. HAve any rust free? thanks

Re: Do you need '64-'66 Chevy Truck Parts?
 

Jeff:

Did you get your upper heater delete plate? If not, please let me know. Thanks for your business.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Sean:

In order to provide parts and prices, I need a list of items from you, more specific than "all of it", so I can put together a comprehensive list of parts and prices. Thanks and I look forward to hearing from you soon, regarding these items or other 4-5-6 Chevy truck parts in the future. Thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Matthew:

You have a PM regarding factory fleetside reverse lights and a factory antennae. Thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

sixty6:

Good evening and thanks for the inquiry. I have a few swb fleet side bed sides, but they need work, so I am not going to be able to help you with a rust-free bed side. Sorry, but thanks for the opportunity and please keep me in mind for other 4-5-6 Chevy truck parts in the future.