Re: Project Reno - 72 cheyenne rebuild
I think the template and screws were in a baggy with the fuse panel block.
|
Re: Project Reno - 72 cheyenne rebuild
She's out in the sun!!!!
Well today, I actually pulled her out of the garage under her own power, washed her up and put some temporary tags on her for the voyage to the exhaust shop. http://images1.snapfish.com/23232323...3A747637ot1lsi http://images1.snapfish.com/23232323...h%3B%3Chot1lsi http://images1.snapfish.com/23232323...e8f9ech7ot1lsi I also picked up my A/C lines and installed them. I was able to find a company nearby named http://www.colliflower.com that crimped them for me. They actually make the parker hoses in the vintage ac system, but mostly do industrial hoses and crimping. Very nice to deal with. http://images1.snapfish.com/23232323...C%3Be865ot1lsi http://images1.snapfish.com/23232323...3A%3Bcdhot1lsi I also received my epoxy for the wood trim components. http://images1.snapfish.com/23232323...5964gh98ot1lsi I am gonna wait for the hot temps to go down before doing that. Probably later in the week. And....for the most fun of the day... the half hour drive to the exhaust shop. It drove like a dream, brakes worked well, Steered easily and shifted smooth. I did hear a loud rubbing noise on the drivers front wheel so will have to investigate that when I get her home. I also have some gauge issues that need to be investigated. Probably a bad ground. Who knows. Anyway, what a joy to drive the truck after three years in the garage and 6 years of ownership. |
Re: Project Reno - 72 cheyenne rebuild
What an absolute beauty! I know that drive to the exhaust shop was fun, probably grinning the whole way.
|
Re: Project Reno - 72 cheyenne rebuild
That's great you got to drive your truck today. I have been dreaming of that day for a while now. So how does it sound with the new exhaust.
|
Re: Project Reno - 72 cheyenne rebuild
Quote:
|
Re: Project Reno - 72 cheyenne rebuild
Quote:
I can't wait to hear it. I am not a magna flow guy and the 44's sounded like they were right in the wheel house for me so we'll see. I'll have to post some audio for you guys to hear it. Until then..... |
Re: Project Reno - 72 cheyenne rebuild
Looks just fabulous! And congratulations on the successful maiden voyage!
|
Re: Project Reno - 72 cheyenne rebuild
Sure is a nice color!
|
Re: Project Reno - 72 cheyenne rebuild
I'm jealous Chris........ Looks awesome !!!
I'm still working on mine but it's slow going !!!! Gary |
Re: Project Reno - 72 cheyenne rebuild
Looks Good..
|
Re: Project Reno - 72 cheyenne rebuild
Quote:
Quote:
Quote:
Quote:
Many more pics coming. Hopefully this is motivation for those that think these projects never ever end. |
Re: Project Reno - 72 cheyenne rebuild
Your truck looks great! Keep the pictures coming...
|
Re: Project Reno - 72 cheyenne rebuild
Quote:
Looks awesome. Lovely color and I bet it sounds downright mean with dual 44s. The firing order of the ls engines makes them sound just a little different than the conventional, but it's a good different! |
Re: Project Reno - 72 cheyenne rebuild
Quote:
Quote:
Anyway, thanks for the compliments. I can't wait to hear the dual 44's either. Should be a nice hum coming out the back. |
Re: Project Reno - 72 cheyenne rebuild
Awesome to say the least! The truck looks great!
|
Re: Project Reno - 72 cheyenne rebuild
Quote:
Yesterday I did a test with the epoxy as I have read some horror stories about this stuff not curing. I mixed up a small batch and poured it onto my test piece. I was nervous for about a half hour as it didn't seem to be setting up, then all of a sudden it started to cure and fast. This morning it was rock hard and crystal clear. Good stuff. http://images1.snapfish.com/23232323...hg74d4efot1lsi So, this morning I made another batch and poured it on the back side of both pieces. I think the smoothness of it will be a better base for the 3M trim tape to grab onto. On the exhaust front, the truck is done. However, I asked for pure duals. Straight back from headers to the bumper on both sides. I guess the tech didn't like that once mocking stuff up and decided to route the passengers side over to the drivers side and do the H pipe after the trans. I haven't seen it yet, but not thrilled about that. If I don't like it, I may have them redo it. It's an expensive system and to not have it the way I want it seems ridiculous at this point. I think the main issue was the sum of bends needed to get over the crossmember. Gonna pick it up shortly so we'll see. I'm sure this guy did a great job, but it will bother me forever if It's funky. I've seen a ton of dual systems on these trucks straight back so don't get it. Maybe it was just easier to do it this way? Or. maybe I just need to relax. Chris |
Re: Project Reno - 72 cheyenne rebuild
It looks absolutely stunning! I'm with you on the exhaust. You want it the way you want it. It's not the tech's blood sweat and tears that went into building this truck the way you want it. It's not his call to deviate from your wishes...Kinda pisses me off, and it's not my truck :lol:
|
Re: Project Reno - 72 cheyenne rebuild
What a purrty truck!
I agree with Mike 100%! You would think they would have called you for the okey dokey prior to modifying the job? |
Re: Project Reno - 72 cheyenne rebuild
My duals have always went between the transfer case and frame on the passanger side, never given me any troubles with the fuel line i have passing thru the same area, its a small area but its been done many times..
|
Re: Project Reno - 72 cheyenne rebuild
Quote:
Quote:
Quote:
Well picked the truck up yesterday and drove it a little more. I must say, I went to get it and had a full head of steam, ready to make him redo it. When I got there he still had it on the lift where I left it. I think he may have anticipated a bad reaction. Much to my surprise, it looks great! The guy just did an awesome job. It is also very serviceable which is huge for me. Take a look. Yeah it's different then most setups, but I am happy with it. Passengers side. http://images1.snapfish.com/23232323...%3Ced24cot1lsi Drivers side http://images1.snapfish.com/23232323...%3C%3Beeot1lsi H pipe http://images1.snapfish.com/23232323...83f3d%3Aot1lsi http://images1.snapfish.com/23232323...B2%3C89dot1lsi tailpipes http://images2.snapfish.com/23232323...%3C25%3Aot1lsi I took the opportunity to drive her some more and wow, she has some balls. the 373's and sm465 are a good combo. In third gear she really pulls hard. The exhaust sounds great. Not too loud unless you really lay into it. The 44 mufflers have a little slap which I don't like, but it's in a very small rpm range. before and after they sound really throaty. I will upload a good audio file. Talking in the cab was also very pleasant. So once I got her home, it was back to fixing the issues. The list is as follows: Gauges don't work and keep popping fuses. Horn stay on all the time. windshield wipers don't work. After doing some research, I found that the horn issue is a common one with the after market nostalgic grant steering wheels. I cut out a piece of thin plastic that matched the shape of these two pieces. http://images2.snapfish.com/23232323...%3C25%3Aot1lsi the brass retaining tabs on the contact ring (right) ground out on the hub (left) and that is the issue. The plastic acts as an insulator between the two pieces. Problem solved! I used thin clear plastic from packaging of a saw blade I purchased at lowes. Next, the gauges.... I disassembled the dash panel and put in a new fuse. Everything works except the temp gauge. I assume a post on something was grounding out. So I sleeved all the gauge posts with rubber and felted the dash panel. I think this will do the trick. The temp gauge is fine so classic instruments is sending a new sender to me. Much to my horror, the wiper motor had to be removed for bench testing. All the wiring seemed fine, but not sure it was getting a good ground. I decided to get it out just in case it needed to be replaced. Well, glad I did. I benched tested and it was fine. I then decided to do a little digging and open up the washer pump. This is the inside of the washer motor filled with sand from when it got sand blasted several years ago. http://images1.snapfish.com/23232323...9%3Ad%3Bot1lsi Turns out i had ordered a replacement and had one in the garage ready to install. So I made a new ground strap on the body of the motor, swapped the old washer pump for a new one, and back in she will go. http://images1.snapfish.com/23232323...d6dfg64eot1lsi Hopefully next week I will be able to get her inspected. Today I hope to wrap up the electrical gremlins and put the last coat of epoxy on my wood pieces. |
Re: Project Reno - 72 cheyenne rebuild
The exhaust looks great! I'm glad it worked out for you!
|
Re: Project Reno - 72 cheyenne rebuild
x2! The exhaust does look really nice. Glad the gremlins aren't being too stubborn and you're knocking them out.
|
Re: Project Reno - 72 cheyenne rebuild
Quote:
Quote:
Today was just awesome. I stayed up late last night and today was able to knock out the rest of my issues. The windshield wipers motor was indeed a bad ground strap. Once fixed, it works fine as does the intermittent module. The dash instruments all work now minus the temp gauge. Should have that squared away mid-week. I also have some weird issue with the vintage air blower staying on, regardless of control panel position, when key is turned to on position. Gonna call them monday. Apparently, the ecu's in those units are pretty sensitive so who knows. May have done something without knowing it somewhere. I thought it was a bad ground, but all my wiring is in good shape. More to come... |
Re: Project Reno - 72 cheyenne rebuild
Looking great man.
|
Re: Project Reno - 72 cheyenne rebuild
Very nice. It's nice to see that the exhaust shop did quality work.
|
All times are GMT -4. The time now is 07:00 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com