Re: "Slowly but Surely" Big J's build thread...
Got the front fender seal set put together today. Oh what fun. First I tried to epoxy it together. That was a huge waste of time. It just wouldn't stick. The kit came with some huge staples but I don't have the tool for those (thats why the epoxy). So I ended up getting out the hammer, needle nose pliers and a drill. Got the staples in and finally got it done.
http://i301.photobucket.com/albums/n...5/P1040736.jpg http://i301.photobucket.com/albums/n...5/P1040737.jpg |
Re: "Slowly but Surely" Big J's build thread...
I just pulled the psgr side fender seals over the weekend - I was wondering how you would repair and replace them.
|
Re: "Slowly but Surely" Big J's build thread...
BigJ...
Those dust seals are a B---h arent they? I ended up doing the same thing. Also, mine have been hanging from the top holes for a couple months now. The bottom holes arent there anymore because that area was replaced:rolleyes: If you have a pic of that area as its supposed to be drilled... it would be appreciated. |
Re: "Slowly but Surely" Big J's build thread...
If you want I can get some shots when I get home - they are still off the truck and the sheet metal is pretty clean where they bolt in...
Shoot me a PM to remind me - if you want a shot or two. |
Re: "Slowly but Surely" Big J's build thread...
5 Attachment(s)
Pix of the A pillar and cowl where the bolts go for the inner fender seals.
If you need more or need measurements - just say the word and I can get more when I get a chance. There is only a few bolts that actually hold the metal bracket thing to the Blazer body - the rest bolt the actual seal itself to the body. |
Re: "Slowly but Surely" Big J's build thread...
Thanks for takin' the time to post the pics. ^^^^^
Got the brake booster bolted up. Its huge compared to the stock one. I'm either going to lengthen the brace or just make a spacer for it and use a long bolt. I think the spacer will be the easiest route. Got the biggest part of the wiring harness gone over, taped up and laid out. Got the gas pedal figured out. The 70 tub used a different pedal assembly then the 72 and thats what I want to go with. Its workin' out though. http://i301.photobucket.com/albums/n...5/P1040759.jpg http://i301.photobucket.com/albums/n...5/P1040760.jpg http://i301.photobucket.com/albums/n...5/P1040761.jpg In other news I've got two new dogs. The first one a Chihuahua (Prissy) was given to us by my grandmaw, she had to move and could only take one dog with her. The second is a Puggle (Belle), half Beagle half Pug. My brother and sister inlaw dropped by the day before Thanksgiving and said, "We've bought you a early Christmas present!". Prissy is a little over a year and a nutjob. Belle is 14 weeks and house training great. I lost my last pup of 14 years about 6 months ago, its nice to have them back in the house. Gotta love dogs! http://i301.photobucket.com/albums/n...5/P1040745.jpg http://i301.photobucket.com/albums/n...5/IMG_9268.jpg http://i301.photobucket.com/albums/n...5/P1040752.jpg |
Re: "Slowly but Surely" Big J's build thread...
:lol: Great pic!
http://i301.photobucket.com/albums/n...5/P1040752.jpg ...blazer's looking good too. ;) :chevy: |
Re: "Slowly but Surely" Big J's build thread...
Now it looks like a Blazer. Got the doors, fenders, tailgate, hood hinges, dash pad, some more wiring, made a neat bracket for the the throttle to go into the firewall, redid the fuel filler neck(wrong angle on it) and probably some other stuff I'm forgetting. A BIG THANKS to jamie72 for coming out to help toss on the sheetmetal. Hope he makes it back soon to finish it, lol.
http://i301.photobucket.com/albums/n...5/P1040765.jpg http://i301.photobucket.com/albums/n...5/P1040766.jpg http://i301.photobucket.com/albums/n...5/P1040769.jpg http://i301.photobucket.com/albums/n...5/P1040771.jpg http://i301.photobucket.com/albums/n...5/P1040774.jpg http://i301.photobucket.com/albums/n...5/P1040778.jpg Heres the hole for the throttle cable. Big hole under the little hole. Bolt goes through the little hole into the bracket. http://i301.photobucket.com/albums/n...5/P1040763.jpg Heres the bracket and the throttle cable. http://i301.photobucket.com/albums/n...5/P1040764.jpg |
Re: "Slowly but Surely" Big J's build thread...
Nice work guys, I like that third pic. Doesn't look like ya did that much sanding:lol:
|
Re: "Slowly but Surely" Big J's build thread...
Awesome J....it does look like a Blazer again. Your getting close!
|
Re: "Slowly but Surely" Big J's build thread...
Lookin' like you'll have a complete ride before the rest of us by a long shot. :two:
Good to have someone to help too. :metal: |
Re: "Slowly but Surely" Big J's build thread...
Looks great in yellow!
|
Re: "Slowly but Surely" Big J's build thread...
Quote:
Quote:
Quote:
Quote:
|
Re: "Slowly but Surely" Big J's build thread...
are you bringing that thing to truck show next year?????
|
Re: "Slowly but Surely" Big J's build thread...
Quote:
:5150: |
Re: "Slowly but Surely" Big J's build thread...
glad to be able to help j, stay on it,it will be done in no time!!!
|
Re: "Slowly but Surely" Big J's build thread...
Got the gas fill lines in, gas pedal redone, wire for rear view mirror ran, wire for spot light ran, under hood wiring about done, and a bunch of other little stuff. I like messing with wiring almost as much as running a piece of sand paper.:lol:
I didn't start it because, no gas in the tank yet, but.... I did bump it over with the KEY! Yeah, it made me grin, lol. http://i301.photobucket.com/albums/n...5/P1040783.jpg http://i301.photobucket.com/albums/n...5/P1040784.jpg http://i301.photobucket.com/albums/n...5/P1040786.jpg http://i301.photobucket.com/albums/n...5/P1040787.jpg http://i301.photobucket.com/albums/n...5/P1040788.jpg http://i301.photobucket.com/albums/n...5/P1040791.jpg I used to pick up all my tools and put everything away after I was done for the day. I've decided thats just a big waste of time, lol. Oh what a mess. The rest of the garage looks like this too, lol. http://i301.photobucket.com/albums/n...5/P1040790.jpg |
Re: "Slowly but Surely" Big J's build thread...
Now where is that stubby screw driver!
|
Re: "Slowly but Surely" Big J's build thread...
Quote:
Quote:
|
Re: "Slowly but Surely" Big J's build thread...
There are screw drivers layin' all over the place and I still can never find one when I need it, lol... I can't wait till some stuff it paid for. I have a future plan of going full tilt on a garage of my own, lol. Well maybe not full tilt, haven't decided on if I need/want a lift yet, haha.
|
Re: "Slowly but Surely" Big J's build thread...
Just went thru the whole build- very nice!!!
|
Re: "Slowly but Surely" Big J's build thread...
Quote:
|
Re: "Slowly but Surely" Big J's build thread...
Got the headlights working today. I did the relay mod and the lights are bright. Its a very easy and worthwhile mod.
http://i301.photobucket.com/albums/n...5/P1040792.jpg http://i301.photobucket.com/albums/n...5/P1040793.jpg |
Re: "Slowly but Surely" Big J's build thread...
Quote:
The sleeping giant awakes...! :lol: Huge difference when the power goes right to the lights for sure, great work my friend, your in the home stretch! |
Re: "Slowly but Surely" Big J's build thread...
Far out!!! :ww::four:
|
Re: "Slowly but Surely" Big J's build thread...
I put in a little power distribution block I got from the help section in the local auto parts store. It made it easier to wire up the stereo constant, rearview mirror, spot lamp, and cigarette lighter. Not pretty but it works. Got a few other things buttoned up, tranny cover and boots, steering column, dash guages, windshield washer fluid tank, rearview mirror plug soldered, etc.
It was a long day. Still haven't fired it up yet. All I gotta do is add fuel, lol. The wiring is mostly done other than chasing down gremlins. The horn, dash lights, and several other things too, lol. http://i301.photobucket.com/albums/n...5/P1040795.jpg http://i301.photobucket.com/albums/n...5/P1040800.jpg http://i301.photobucket.com/albums/n...5/P1040797.jpg http://i301.photobucket.com/albums/n...5/P1040804.jpg http://i301.photobucket.com/albums/n...5/P1040805.jpg http://i301.photobucket.com/albums/n...5/P1040806.jpg |
Re: "Slowly but Surely" Big J's build thread...
Looking really sweet!
|
Re: "Slowly but Surely" Big J's build thread...
FIRED IT UP TONIGHT! Yeah, that deserves all caps, lol. Took a minute to start it though. I didn't have the connector pushed onto the spade in the HEI, but beside it. That was one of those "Dammit" moments. Started laying out the way I want the sound system to go in. Shouldn't be too big a deal. I just hope the amps work, I powered them on but put no sound through them yet. Maybe tomorrow. The tach works, fuel guage works, oil pressures good, not sure if the speedo works, lol. I haven't found the wire for the temp guage yet but its in there somewhere. The amp guage didn't move but that could be a bad alternator, its one that I had laying around and no idea where it came from. I'll upgrade that when I get some dough anyways. Started to mount the under hood light that I took off a late model Chevy pickup. Not sure if thats where I want it or not. Heres a few pics. I forgot my camera so these are cell pics, not quite as good but still visible.
http://i301.photobucket.com/albums/n.../Photo0007.jpg http://i301.photobucket.com/albums/n.../Photo0008.jpg Heres the amps, one Kenwood 1000 watt sub amp and one Fosgate 140 watt to push two 6x9's. http://i301.photobucket.com/albums/n.../Photo0009.jpg |
Re: "Slowly but Surely" Big J's build thread...
My amp gauge never moves much. If I drain the Battery a little it will move while it is charging.
|
Re: "Slowly but Surely" Big J's build thread...
Quote:
|
Re: "Slowly but Surely" Big J's build thread...
Looking good man. Looking REALLY good. :metal:
|
Re: "Slowly but Surely" Big J's build thread...
Quote:
|
Re: "Slowly but Surely" Big J's build thread...
J. my temp. wire(green) comes out of the bulkhead connector(left hand side of the bulkhead connecter which is the engine harness) top, second wire in to the right
If this doesn't make sense, as I'm confused and I'm looking at it, I'll take a pic. for you |
Re: "Slowly but Surely" Big J's build thread...
I've got the diagrams, just have to take the time to run it down. What messes me up is its not dangling there, lol. It should be but who know, lol.
|
Re: "Slowly but Surely" Big J's build thread...
Awesome, i'm getting more and more motivated to work on mine now.
|
Re: "Slowly but Surely" Big J's build thread...
Got a few things ironed out. Wipers are fixed, still no washer spray, could be a bad switch or who knows, lol. I layed all the stereo stuff out the way it needs to go and it all works, amps are good to go. Now I just need to run all the wiring to where its supposed to go.
http://i301.photobucket.com/albums/n...5/P1040808.jpg http://i301.photobucket.com/albums/n...5/P1040810.jpg http://i301.photobucket.com/albums/n...5/P1040811.jpg |
Re: "Slowly but Surely" Big J's build thread...
You will be ROCKIN Big J. Nice work.
|
Re: "Slowly but Surely" Big J's build thread...
Looking saaweet!!
What are your plans for the sub enclosure? I'm still deciding how to do mine....? |
Re: "Slowly but Surely" Big J's build thread...
Quote:
|
Re: "Slowly but Surely" Big J's build thread...
There's a rubber diaphram for the washer spray on the wiper motor, once those crack, it won't spray.
Does it sound like it's trying when you push the knob? |
All times are GMT -4. The time now is 04:42 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com