![]() |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
Wish we could have done some steaks on your new Grand Cooker. I dislike the fireworks as animals go nuts. But they can be pretty, on TV. Busy weekend, working on the arch over the driveway. Because of my back, progress is slow, but amazingly, the amount of work I did on Saturday and Sunday was way more than any day in the last three months. Osteopath and gentle exercise by walking 2km most days, seems to have allowed some recovery. I will do the archway write up in one when it is completed. I have one more piece to build and mount, along with the day job. Saturday Sally painted the nesting teapot doors, a nice shade of yellow. https://hosting.photobucket.com/imag.../001(951).HEIC Resulting in a nice finish after she waxed all the wood twice with a nice beeswax based wood treatment. Her friends should be happy. You will note that one is missing a lid. Sunday bootfair it was on the list of stuff to find, a lid. https://hosting.photobucket.com/imag...x/001(348).jpg Sunday bootfair was minimal, possibly 15% of its usual size, due to threatening rain. I only got to spend £2.20 20p for a broken sugar bowl, which donated its lid for box no 3 And £1.00 each for a bag of steel wire staples, and yes, we still use them. Also a bag of random sized split pins for £1.00 which was great, gain as our older cars, especially American stuff, still uses split pins. https://hosting.photobucket.com/imag.../001(952).HEIC Happy with the result of the 20p lid. https://hosting.photobucket.com/imag.../001(950).HEIC Also went out in the truck to go looking for some cement, but two hardware stores had zero stock. Imdid manage to spend £168.00 on a large electrical pressure cleaner. If it lasts s well as the last one did, I will be very happy. https://hosting.photobucket.com/imag...x/001(353).jpg https://hosting.photobucket.com/imag...x/001(352).jpg Created a nice obstruction to pi$$ off speeding freaks that do 50+ mph in the 30 zone in front of my place, a small win. Before reversing the truck back down the drive. https://hosting.photobucket.com/imag.../001(957).HEIC And suddenly the weekend was over again. But pleased with what I got done. And driving the truck. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
So a quick photodump.
The idea was to create a arch for the garden to the right to grow into and over so that it partly camouflages and draws attention away from the garden. Recycled timber was free. Screws expensive, cement overpriced, and paint paid for before. The rest mostly labour and using stuff paid for before. Total cost, probably under £80.00 You saw the 450mm deep holes go down before. https://hosting.photobucket.com/imag...x/001(339).jpg I decided to sandwich two beams per post. Cut to length and screwed securely. https://hosting.photobucket.com/imag.../001(954).HEIC Test fit. https://hosting.photobucket.com/imag...x/001(349).jpg https://hosting.photobucket.com/imag...x/001(350).jpg I also used some of the blackened sections to create a ladder for each side. https://hosting.photobucket.com/imag...x/001(351).jpg Painted, thanks to Sally carrying on with the paint while I built no 2. https://hosting.photobucket.com/imag.../001(953).HEIC On Sunday Sally worked, so I placed the uprights in the holes, alone, my back is recovering its strength, though the damage is permanent, I am moving easier and better every day compared to three months ago. https://hosting.photobucket.com/imag...x/001(354).jpg NextI made a set of cross beams up. The front gets a wide one tomcreate the illusion of size and sheer bulk, spindly would not work. https://hosting.photobucket.com/imag...x/001(224).JPG Next up , squaring and levelling it all out, then anchoring in position. https://hosting.photobucket.com/imag.../001(958).HEIC Followed by cross beams. https://hosting.photobucket.com/imag.../001(955).HEIC This was followed by screwing into position the individual cross pieces, as the whole lot would have been to big, heavy and unwieldy to put up alone. https://hosting.photobucket.com/imag.../001(956).HEIC I knew I wanted to have a front section hanging down, but removable for when the welding caravan gets removed finally. So mocked up with a piece of trellis fencing, just to help visualisation. Realised it needed to be a bit shorter. https://hosting.photobucket.com/imag.../001(960).HEIC Final height. https://hosting.photobucket.com/imag.../001(959).HEIC I tried to get some cement to mix for the foundations and neither B&Q, nor Wickes or Homebase had any. Went to my local village hardware store on Monday afternoon……… No cement, but had some bags of “Post Mix” at £10.00 per 20kg bag. Trust me, not impressed, but little choice, so I paid my £40.00 for the convenience. https://hosting.photobucket.com/imag...x/001(355).jpg Tuesday afternoon I also decided to try out my new pressure cleaner. NVH is bad, trigger is stiff, no lock on it, oscillating head does a weird thing where it goes through frequencies that seem to change the effect. Not sure it is worth the money at £168.00 vs the £110.00 model. https://hosting.photobucket.com/imag...x/001(357).jpg My fig tree, propagated last year has produced one fig, pretty chuffed with that. https://hosting.photobucket.com/imag...x/001(356).jpg |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Next job was to make the lower valence up.
Again, made as I went along. Cut first, measure second. https://hosting.photobucket.com/imag.../001(969).HEIC All of this has been a pain to do solo, as it is high, the ladder is uninspiring, and I worry about my back letting me down, well crashing me to thw floor really. https://hosting.photobucket.com/imag.../001(967).HEIC The whole morning there was a Robin keeping me company, chatting and making an angry noise, I guess he has a nest somewhere nearby. https://hosting.photobucket.com/imag.../001(961).HEIC These should ensure I can dismantle the valence later, to remove the caravan with ease. https://hosting.photobucket.com/imag.../001(964).HEIC Once squared up and screwed together, it was time for the post-crete to -be added to the holes, along with a load of water to set it off. https://hosting.photobucket.com/imag.../001(968).HEIC Done. https://hosting.photobucket.com/imag.../001(963).HEIC Followed by some decorations https://hosting.photobucket.com/imag.../001(965).HEIC https://hosting.photobucket.com/imag...x/001(225).JPG I also cleared the excess wood off the drive, in under the carport. And put up some road signs, andmy battle weary Stars n Stripes. https://hosting.photobucket.com/imag.../001(971).HEIC Later on the Robin was sitting atop the structure, singing away merrily. https://hosting.photobucket.com/imag.../001(972).HEIC Went to bed at 12,30 and by 04.10 the night was over. Not ideal, but at least I took yesterday and today off work. Sunrise was nice. https://hosting.photobucket.com/imag.../001(970).HEIC My weekend is here, loads of clearing up to do today, and maybe mounting the dentists light under the carport too. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Boy, that is a Beautiful picture!
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
I see so much beauty around me It makes sharing easy. One for Craig, along with the Coke trucks and a small beach buggy. He is a VW aircooled and Coke guy of course. https://hosting.photobucket.com/imag...x/001(359).jpg A nice carved wooden cat for mate Kevins new courtyard garden https://hosting.photobucket.com/imag...x/001(360).jpg And for myself a set of license plates for my collection. No idea where they are from. https://hosting.photobucket.com/imag...x/001(358).jpg So total haul included. Wooden picture frame, unused £1.00 Wooden blue star £1.00 Wooden carved cat £2.50 60’s Beach Buggy £4.00 Three toy cars £1.00 4 teapots, to be used as Blue Tit nests £1.00 each vintage Porcelain bathroom light pull £3.00 License plates £2.00 of both. Three Poppy scarves unused, for £1.00 Half a box of gutter bolts for a cart iron bench build £2.50 https://hosting.photobucket.com/imag.../001(975).HEIC The rest of today was spent clearing out the carport, followed by sorting out Mickeys and my communal lumber into size, type and length, clearing the shared alleyway about 80% There are still two pallets worth of aerated breeze blocks that we need to find a new home for in the alleyway though. Once done, I want to build some decent shelving and support doe all the wood to be stored, giving me back the carport for the Rezin Rockit build. Decent weekend, almost over. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Nice haul. :)
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Hi Rian, I too check in your thread regularly, but never comment. Love seeing all of the progress around your house, boot fair buys, and English country side and city pictures. Very fascinating for those of us who are state-side. The English country side, I find, very beautiful.
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
I get a buzz out of some stuffI find. Crazy cheap or useful Quote:
But it will never be America on many levels. I share a lot of my stuff so others will be inspired or have a template to avoid the screw ups I may have made. Some of you may remember the gokart chassis I bought a while ago. Barstool racer is the objective Not shortened as is traditional but full length with a small pickup bed over the motor. So how many horses should I look for in a motor. No need to be a rip snorting turbo NOS driven nutter mobile. But needs to be reasonably capable of drawing around 150kg around a field. I see Briggs and Stratton motors on rotovators with 3.5 hp and bigger on other stuff. Go on……. Don’t kill me. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Been a while.
Loads happening, nothing related to the C10 though. And it may be a while still. However, after my back really screwing my life up for a year and stopping all progress on all projects, it seems to be on the mend very slowly. It will not heal in the conventional way, but with a bit of clever use of planning, leverage etc, it is allowing me to do some stuff. The Rezin Rockit, GoKart and a few other things are all awaiting their turn. As is usual here, my first stop when restarting my life, is to take stock of stuff. So a clear up and clear out was in order. The scooter I got from Craig in 2019 found a new name on its V5c when I gave that away. Followed by clearing out two pallets of breeze blocks, given to mate Neil. Amazing how fast stuff moves when you give it away. https://hosting.photobucket.com/imag.../001(984).HEIC So on Tuesday Neil came with his Transit van and his 13 year old grandson, to whom I had offered the Italjet Scooter. Harley had thought it over and decided he would rather build a car for when he is 17 which is a wise move. So the scooter went onto FB Marketplace and was gone, collected and ownership changed in less than an hour. We loaded all the blocks in. As far as it could go, so Harley and I carried the blocks through, and Neil packed them, his back is also knackered. Nearly 150 of them. https://hosting.photobucket.com/imag.../001(986).HEIC I tried to make him take some more stuff but he declined mHarley took a very good office chair that was surplus for his own bedroom. Walking around looking at the C10 and other stuff, Neil asked what next, so I said a new pair of fenders needed to be bought and imported…… He looked at the old ones, blasted and primed and said that if I got some patch panels, he would give them a go at repairing. Of course I had the panels and rear supports for years. So as a “Trade” he took the fenders away and will be welding them up for me. https://hosting.photobucket.com/imag.../001(985).HEIC Pretty good result, even though not planned at all. Next job was clearing more of the alleyway in order to build some storage space for all the lumber in the carport. . |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Up at 05.00 (old age, sore body, restless mind) showered, shaved, mug of tea, quick scan of internet etc.
Down at the bootfair by 6.15 and field was already full, with the line down the side of the exit route being filled with vendors. Actually not a lot for me, but still had a nice few hours and home before 09.00 for brekkie. https://hosting.photobucket.com/imag.../001(996).HEIC Total haul. Smalls. https://hosting.photobucket.com/imag.../001(997).HEIC Glazed plant pot £2.00 3/4 of 12 liter fence paint £3.00 and a nice chat. Firemans helmet, unused, with working speaker £1.00 Another teapot £1.00 Aluminium drain downpipe corner and a gate slider £2.00 King Dick 50p Metal sign 50p for shed. 4x VW Beetle/Baja’s £1.00 Union Jack Mini - Free Small tools all for £2.00 from nice seller with teapot. Includes Oil filter chain spanner, vintage pliers, multi-tool for closed boxes, two very flat spanners, two beautiful vintage drill bits, rawlplug tool (punch) 3 micro drillbits, 2x tyre pressure gauges. So that was the haul, not big but nice to be out and the fence paint alone makes up for the rest. More random reports later. Hot out today. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Monday morning.
Yesterday was a hot one. I cut my one side hedge and half of Mickeys yesterday. Not clever on a hot day, but needed to get it done. The last week had been a flurry of random, but focussed action. Lucky the Chevy truck is patient and loyal. Loads happening, nothing related to the C10 though. And it may be a while still. However, after my back really screwing my life up for a year and stopping all progress on all projects, it seems to be on the mend very slowly. It will not heal in the conventional way, but with a bit of clever use of planning, leverage etc, it is allowing me to do some stuff. The Rezin Rockit, GoKart and a few other things are all awaiting their turn. As is usual here, my first stop when restarting my life, is to take stock of stuff. So a clear up and clear out was in order. The scooter I got from Craig in 2019 found a new name on its V5c when I gave that away. Followed by clearing out two pallets of breeze blocks, given to mate Neil. Amazing how fast stuff moves when you give it away. https://hosting.photobucket.com/imag.../001(984).HEIC So on Tuesday Neil came with his Transit van and his 13 year old grandson, to whom I had offered the Italjet Scooter. Harley had thought it over and decided he would rather build a car for when he is 17 which is a wise move. So the scooter went onto FB Marketplace and was gone, collected and ownership changed in less than an hour. We loaded all the blocks in. As far as it could go, so Harley and I carried the blocks through, and Neil packed them, his back is also knackered. Nearly 150 of them. https://hosting.photobucket.com/imag.../001(986).HEIC I tried to make him take some more stuff but he declined mHarley took a very good office chair that was surplus for his own bedroom. Walking around looking at the C10 and other stuff, Neil asked what next, so I said a new pair of fenders needed to be bought and imported…… He looked at the old ones, blasted and primed and said that if I got some patch panels, he would give them a go at repairing. Of course I had the panels and rear supports for years. So as a “Favour Trade” he took the fenders away and will be welding them up for me. https://hosting.photobucket.com/imag.../001(985).HEIC Pretty good result, even though not planned at all, life has it’s own way of keeping the books balanced I guess. Next job was clearing more of the alleyway in order to build some storage space for all the lumber in the carport. New pressure washer worked well, I cleaned the walls (they are not sealed against the garage wall, and a leak in the gutter, blus some weather and rain getting through there, plus all rain off the garage and carport actually flowing down the alleyway and out the back to the farm had left moss on the walls on both sides, of course the spray ends up on the roofing too, so I ended up cleaning all four sides of the alleyway These plus more needed to be processed. https://hosting.photobucket.com/imag.../001(983).HEIC Before cleaning on Tuesday evening after work https://hosting.photobucket.com/imag...x/001(361).jpg After. I also discovered 5 sheets of nasty/cheap Chinese packing crate ply, all badly rotten on the bottom edge, so stripped all the rot back with the pressure cleaner, as well as both the front and rears. Then let it all dry, and cut the sheets down to remove the rot, as they had a job waiting too. https://hosting.photobucket.com/imag.../001(991).HEIC I took Friday as a leave day in order for Mickey and I to be able to knock out the shelving and racks. Starting at 8.30 we worked nonstop, just grabbing tea and sodas through the day, finishing by 4.30pm This included feeding a 45 gallon drum incinerator all day with so much of the offcast bits, and wood found to be damaged over the years. I also have a havit of using the worst bits first and then the better. Mickey loves using the bigger longer, pretty bits, so it was bit of a job to stop him grabbing the best bits first, but he got my motivation quickly enough. These upright posts are around £10.00 each if you buy them, they came from a deck that was lifted and you can see, undamaged, the rest if the wood, likewise. We used a load of turbo screws, and the 120mm hex head decking screws used in the heavy stuff was all rescued from the deck that was dismantled by Mick. So a lot of this between us, and with multiple tools, we could both measure, cut and fit. https://hosting.photobucket.com/imag.../001(990).HEIC https://hosting.photobucket.com/imag.../001(989).HEIC https://hosting.photobucket.com/imag.../001(988).HEIC Two cement mixers tucked into their custom space. All the shelving was planned around the mixers that are bulky and also an aluminium table frame Mick wanted to incorporate as another dry working space outside, as it saves on getting the driveway/garage/carport full of dust and sawdust. So this was Friday afternoon 4.30 and Mick was off to the pub for a well deserved pint. https://hosting.photobucket.com/imag.../001(987).HEIC Saturday morning by 08.00, Sally was here and the three of us started packing the wood from the carport into the racks and shelves. I have an ability to visualise and calculate in space, which neither Mickey nor Sally can do, and in fact she was stressing. By 11.00 all the wood, some steel etc was out of the carport. https://hosting.photobucket.com/imag.../001(992).HEIC Mick was already working at the table making a trellis for his sunny corner at the house. Made me grin that he was straight onto using the work table, which has 45mm planks and a sheet of ply on it. Packed. https://hosting.photobucket.com/imag.../001(993).HEIC And the carport filled with toys that all need motors and transmissions found and fitted https://hosting.photobucket.com/imag.../001(994).HEIC . |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
So after clearing the carport, I also removed the solid wrought iron gate that had been there since 2011 between my and Mickeys yards and the shared alley storage.
This left a large hole, 6x4 foot, to be dealt with, mainly to slow the wind down when one works there in winter. https://hosting.photobucket.com/imag...001(1003).HEIC Looking from Mickeys side after I cut the hedge on his side you can see the odd shaped hole. Nothing is straight as it was never planned to be a doorway. https://hosting.photobucket.com/imag...001(1000).HEIC When I gathered the wood there were four plywood shelves, all 9 inches wide. Adding them to another sliver of ply have me the width needed. The eagle eyed amongst you will notice the hole differs by 50mm top to bottom as the post originally fitted to create the end of the roofing sheets that hang down from the top of the structure was a twisted piece of lumber. So that means I needed to create a door which fitted the hole, and the post will be modified to compensate for the pi$$ed post. So Monday evening after work I quickly slapped a door together. https://hosting.photobucket.com/imag...001(1010).HEIC Mickey cannot resist the noise of a circular saw or power drill. So fresh from a shave and shower, smelling like a teenager out to score first base, he was straight aroundf after he had had his dinner. Supervising as always. https://hosting.photobucket.com/imag...001(1005).HEIC Screws penetrated by about 3mm so I had to cut them all back with the grinder. https://hosting.photobucket.com/imag...001(1006).HEIC After that I fitted it in the triangulated hole, and realised it needed a bit more work to fit, and with the weight, it needs a small jockey wheel. https://hosting.photobucket.com/imag...001(1002).HEIC So once that was done I shut shop, made a pizza (disappointing) and a shower. Plans were to get back to it today after work. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
So my day was mostly spent on the phone or at my desk.
Late afternoon, the weather was still warm and dry. So I quickly painted the front and rears. Amazingly it dried in the time it took to make a coffee and drink it. \ https://hosting.photobucket.com/imag...x/001(228).JPG https://hosting.photobucket.com/imag...001(1011).HEIC Sally popped in around 5.30 and helped me lay the stripes…….. Anyone figure what I am doing ?? https://hosting.photobucket.com/imag...x/001(364).jpg Yes, you guessed right. And there is a formula for getting it right. Ratios. https://hosting.photobucket.com/imag...ix/001(70).PNG https://hosting.photobucket.com/imag...ix/001(71).PNG I used the 1120mm or 42” top width to calculate in order to get the Stars n Stripes ratio as close as possible to perfect. https://hosting.photobucket.com/imag...001(1009).HEIC Then opened the last of my red Hammerite smooth. https://hosting.photobucket.com/imag...x/001(363).jpg Very tempted to do a distressed flag, but thats more effort than what I felt like. https://hosting.photobucket.com/imag...x/001(227).JPG https://hosting.photobucket.com/imag...001(1008).HEIC Used the last bit of paint to paint over the damage on my welding trolley. Managing to pour the last of the paint over myself, my one foot and the driveway. Man I cursed. https://hosting.photobucket.com/imag...001(1007).HEIC I went out earlier to check the paint and it is touch dry. So tomorrow I will pull the tape off. Then I just need the 50 stars to complete the job. Coffee time, then I wont sleep. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
You and Mickey stay busy all the time.
Everything is looking good. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Went out for a haircut yesterday early. Our local-ish guy is there from 07.00 for people who need to come and go early.
Walking back to the truck I was again struck by the fact that it always makes me grin. I like this thing. https://hosting.photobucket.com/imag...x/001(362).jpg Last night late I got a message from a South African expatriate living in Rhode Island that he had got me one of the hardest USA state plates to get. Posting it out to me this week for my collection. Pretty pleased to say the least. https://hosting.photobucket.com/imag...x/001(229).JPG Removed the tape from the red bands and masked the blue panel for the stars. It may take a while to get the stars to use on it but pleased so far. https://hosting.photobucket.com/imag...001(1012).HEIC Last sunny day before the weather swings back to a load of rain. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
So another long overdue job done after work last night was to fit the Dentists lamp in the carport for inspection of engines and other detailed items when you need a super light source.
Thanks to Paul “Oblertone” who brought it up to me and left it with his daughter in Essex to collect a few weeks ago. https://hosting.photobucket.com/imag...001(1014).HEIC So I prepared two 100mm x 50mm pieces of wood to fit between the roof beams, and painted and screwed them together. Then found my 65mm drill bit (call it what you want) to drill a hole through for the adjustable hanging post to go through, as well as the wiring from the lamp to mains. https://hosting.photobucket.com/imag...001(1013).HEIC One of those purchases made years ago from a member on UKGSER who needed to move it on. At £80.00 it was and is a bargain. My other 1950’s drillpress has ceased to function, tripping the power when you turn it on. https://hosting.photobucket.com/imag...001(1018).HEIC Used the rattle gun to run the coach screws in to hold the mounting plate in place, and cut the excess 10mm off the rear with a cutting disc. https://hosting.photobucket.com/imag...001(1019).HEIC Mounted with some more free hardware. Its not going anywhere. https://hosting.photobucket.com/imag...001(1017).HEIC Light fitted. https://hosting.photobucket.com/imag...001(1022).HEIC Mickey of course came around to check up on me after he had his dinner. He liked it. https://hosting.photobucket.com/imag...001(1021).HEIC Tucked away. https://hosting.photobucket.com/imag...001(1015).HEIC And seen in perspective. Does not get in the way of headroom. https://hosting.photobucket.com/imag...001(1020).HEIC Of course I had to go see just how bright it is after sunset as well. I think it works. https://hosting.photobucket.com/imag...001(1016).HEIC One dentists junk is another mans treasure. Dismantle mobility scooters rear end tonight. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Yesterday afternoon I managed to sort one of my treasure piles out.
All the steel “off cuts” that I had stashed in the garage went out to one shelf in the new wood store. After I rearranged some wood and added a few brackets for very long 8 meter lengths of plastic pipe. https://hosting.photobucket.com/imag...x/001(366).jpg Next job was to remove the motor, brackets, controller module and other junk as well as rear axle from the mobility scooter chassis. https://hosting.photobucket.com/imag...x/001(368).jpg The gearbox opened, I removed all the gears and closed that up again. https://hosting.photobucket.com/imag...x/001(367).jpg Cut the centre post off, all other loose tabs and ground it all smooth. Then reassembled the rear axle under the chassis. Rake added. https://hosting.photobucket.com/imag...001(1023).HEIC Current thinking is to lengthen the chassis. Possibly source a cheap go kart rear axle, narrow it and refit with wide tyres. OR…….. (and I need advice here) Use a regular driven lawnmower rear axle and whatever mechanisms are in it, to fit a mower engine and its bits to make a simple, slow (safe) little ride on. https://hosting.photobucket.com/imag...001(1024).HEIC Thanks to @forddan68 for picking up a Schwinn kiddies tricycle for me on his way home last night. No, I have no idea, I just like them. They are never cheap, and looking at the condition of this one, they should be cheap. Needs a ton of cleaning up and paint. But hopefully be a nice little side project https://hosting.photobucket.com/imag...ix/001(72).PNG https://hosting.photobucket.com/imag...x/001(365).jpg I am thinking red and Lime green. . |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Well, going in some direction, just not sure if it is the right one.
Yesterday I had given to Sally for putting up with me. So it was a bit of shopping, lunch and coffee at the Turkish in Chatham. Also some food shopping. My day was made when I found some USA made Cajun spice, I love cooking with it, as does Sally. https://hosting.photobucket.com/imag...001(1026).HEIC Before we went out, I was looking on Marketplace for a gokart rear axle and some wheels. Found a seller who had a load of plastics and brackets, and messaged him on the off chance that he may have more parts to sell, turns out he has a ton of parts, mini moto engines, quad engines etc. But he also had a rear axle, with sprocket, disc and bearings plus carrier brackets and a spare wheel. Cost? £50.00 which is way out of my cheap ass league, not negotiable, but if you add up the value, I guess it is still a good price for what it is. So he messaged while we were having lunch that I could collect. Went there at 3.00pm after shopping, spent 45 minutes talking to him, Sally sat in the car. Then back home with the bounty. Sally went home to water her garden and do a few things. https://hosting.photobucket.com/imag...x/001(230).JPG Quicky mock up shows I will have to cut about 250mm or 10” out the axle and re~weld it to fit better in proportion to the front end, which I still like. And once the chassis is lengthened it should come into proportion. https://hosting.photobucket.com/imag...x/001(369).jpg While down at the garage, mate Craig started to interfere from 80 miles away. Sallys son was bringing back the mini moto I had given her for the grandson. He had partially dismantled it, as it was not running right according to him, only running well on choke. He had also tried unsuccessfully to “govern” it to slow it down for Harry. Then gave up. So in stead of buying some small used motor, I got given bck some small motor that I paid for already. He brought is back and chatted for a while, then went off again. https://hosting.photobucket.com/imag...001(1025).HEIC So this is where @craigrk comes in. “Why don't you build it as a TRIKE as you like different, that will be different” he asked me via text. You see, friends……. Always creating havoc. So I will take a look and see what a single rear wheeled creation works like, or else I will remove and add just the motor to the ride, narrowing the gokart axle and going that route. Sally was back by 7.00pm and rather than sit indoors drinking or eating in front of the telly, we did all the cutting and prep for 4 more Blue Tit nests. To be completed today, and when I get more Soudal Crystal adhesive. https://hosting.photobucket.com/imag...x/001(370).jpg Bootfair was cancelled due to weather forecast. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
No bootfair, so a very lazy, slow start.
I don't think I ever had breakfast at 10.00am and then watched some Olympics with Sally. Eventually made it to the shop. Ad made some more birds next houses for Sally, every screw had to have a 1.5mm pilot hole as it is thin, nasty, IKEA pine bookshelf wood. Once done, I set her off to start varnishing them with the brush she chose 10mm wide. And I made a frame for one of the canvas prints, Anthony the one lodger made for me. https://hosting.photobucket.com/imag...001(1030).HEIC Done, as happy as I need to be. https://hosting.photobucket.com/imag...001(1029).HEIC Sally carried on painting. But left at 13.00 to go cook Uncle Bob the hoarders meals for three days, and get ready for a BBQ we were headed to at 3.00pm https://hosting.photobucket.com/imag...001(1028).HEIC https://hosting.photobucket.com/imag...x/001(371).jpg In the mean time I started to place bits together. Rear wheel covered in a wooly hat. https://hosting.photobucket.com/imag...001(1027).HEIC Yup, I like that so far. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
A few random things.
Not everyones interest, but hopefully something for everyone. About 8 years ago I built this double nesting box. Depending on the season, the blackbirds use it every year, and some other birds have built a next in the rear section. Sunday night it came down. https://hosting.photobucket.com/imag...001(1033).HEIC Note the neat, weaved nest, incorporating moss etc. https://hosting.photobucket.com/imag...001(1034).HEIC Rebuilt. Blackbird mansion, https://hosting.photobucket.com/imag...001(1032).HEIC And the other side, open for pigeons or whatever birds prefer an open, eaves type space. https://hosting.photobucket.com/imag...001(1031).HEIC Followed by a nice sunset. https://hosting.photobucket.com/imag...001(1036).HEIC Today I had to pick up an order and an eBay purchase. Soudal Crystal adhesive for the blue tit Teapot nests. On the way home I popped in at Uncle Bob’s to see a couple of motors he has. £50.00 buys a Honda, no centrifugal clutch. https://hosting.photobucket.com/imag...001(1035).HEIC Or a B&S motor with centrifugal clutch, but V-Belt drive. https://hosting.photobucket.com/imag...001(1037).HEIC So options for the barstool racer. The other item was 50 vinyl cutout stars to use for the gate. https://hosting.photobucket.com/imag...001(1041).HEIC Quite challenging to be honest. https://hosting.photobucket.com/imag...x/001(231).JPG https://hosting.photobucket.com/imag...001(1042).HEIC Really hard rain came down. Nice and dry under the roof too. https://hosting.photobucket.com/imag...x/001(372).jpg And finally a coat of blue enamel. https://hosting.photobucket.com/imag...001(1043).HEIC Lets hope the stars come off easily enough once dried. And also that the positioning is good enough to look like a cartoon style flag. Not an easy job, placing the stars. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Getting questioned about this door I am making, and the orientation of the stars and stripes.
So here are the reasonings. Also remember, it is not a factory made, perfectly proportioned door. The hole is actually irregular, so I needed to just eyeball it and try get it looking a bit cartoonlike. If you then go and look at the protocols for how the flag is flown, draped, or hung in various situations (and many people do not know these things about their own flags, including the Union Jack that has a top and bottom as well) you will find that the Union has to be to the left when applied as I am doing. Hope this helps. There's a right and a wrong way to hang the flag vertically. Don't hang your flag backwards, upside down, or in another inappropriate fashion. If you're hanging your flag vertically (like from a window or against a wall), the Union portion with the stars should go on the observer's left. Never dip the flag to any person or anything. History of the American flag - American flag layout US flag has over 245 years of history. Our flag size calculator presents only one of 44 designs that the official American banner has had over these years. It all started in December 1775, with the very first pattern that incorporated a Union Jack (UKemoji.jpg) into a field full of white and red stripes. The second design in 1777 brought a very anticipated change - a union full of stars each representing a US states (there were only 13 of them at the time!). This US flag design consisted of 13 red & white stripes and the same number of stars. Each flag that followed didn't last long - the US was continually expanding, and new states (and stars!⭐) were constantly being added. 💡 Americans always introduced new flags on the 4th of July! The current flag was created in 1960 after the addition of Hawaii, the only island state located outside of North America. That was when the 50th star was finally placed in the union, creating the everlasting image we know today (which has specified American flag proportions). |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quick bunch of pics.
Went down to the garage this morning early. https://hosting.photobucket.com/imag...001(1045).HEIC Started to pull off the stickers, being that the plywood is as rough as it is, I expected some paint seeping under the stickers. Not much of a problem though, as it is a gate/door in rear of the carport. https://hosting.photobucket.com/imag...001(1046).HEIC Result. https://hosting.photobucket.com/imag...001(1044).HEIC Mate Fil “Sparkplug” asked about a handle…… Of course, as removed from a disabled public toilet. We needed it more. https://hosting.photobucket.com/imag...001(1047).HEIC https://hosting.photobucket.com/imag...001(1049).HEIC And just placed in position. Needs the frame to be made up, then door hung. Plan is to add a small wheel to the underside. https://hosting.photobucket.com/imag...001(1048).HEIC This afternoon during my lunch break I cleared the deck, and then after work quickly pressure cleaned it. Taken the day off tomorrow, another long weekend, Sally is off too. So plan if it stays dry, is to put a coat of wood sealer and stain on, followed by another coat once dried. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Gate came out real nice.
Enjoy your long weekend. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
Thank you, happy with the gate, once hung, even more so. Weekend will be good too. So taking Friday off as a day vacation, I had thought it may be spent out back, doing stuff in the garage or yard. But being that I know Sally rarely asks for or takes anything from me, I asked her what she would like to do, and suggested a walk in Whitstable and possibly lunch. Of course we would go in the truck. Surprisingly she agreed and was quite excited about Whitstable. Nice drive down, parked up and went for a walk,,charity shops, sight seeing etc. https://hosting.photobucket.com/imag...001(1064).HEIC Tide was out in the working harbour. Never seen it so low. https://hosting.photobucket.com/imag...001(1050).HEIC Typically maximised space. https://hosting.photobucket.com/imag...001(1051).HEIC https://hosting.photobucket.com/imag...001(1060).HEIC https://hosting.photobucket.com/imag...001(1059).HEIC https://hosting.photobucket.com/imag...001(1056).HEIC https://hosting.photobucket.com/imag...001(1052).HEIC https://hosting.photobucket.com/imag...001(1054).HEIC https://hosting.photobucket.com/imag...001(1057).HEIC https://hosting.photobucket.com/imag...001(1061).HEIC https://hosting.photobucket.com/imag...001(1055).HEIC https://hosting.photobucket.com/imag...001(1065).HEIC Sally offered to buy lunch….. Would I say no? Cod and chips £9.00 Guess they see the tourists coming a mile away. https://hosting.photobucket.com/imag...001(1062).HEIC On the way back the tide had returned somewhat, looked a bit better. https://hosting.photobucket.com/imag...001(1063).HEIC And one of my favourite stalls. https://hosting.photobucket.com/imag...001(1058).HEIC Back at the truck Sally got in and I went to pay for parking, and walking back I noticed a mark on the rear bumper corner. Bugggerr !1 Right through the paint layers, being a thick metal bumper it must have done some damage to the other car too. I took a look and feel, and then took a pic. At that, a Chinese (looking) guy and a lady came walking over and he said “That was my fault, I am sorry” Now my responses could range between a tirade, decking him, or losing my dignity in other ways. But the damage was done, he confessed. So I just calmly told him that he really should look where he is driving (as he had managed to cross over the lane and hit the truck) and to maybe be kind to someone else in the next few days. The thing is, if he did an insurance claim, my truck is involved and the way insurance works of course, the next time I renew, I am a risk, regardless of cause. And there are other little marks on both front and rear bumpers, so a respray will happen one day. https://hosting.photobucket.com/imag...001(1053).HEIC When I got home, I chatted with Dennis and he offered to mix me some paint for a touch up and post it out to me. I declined as the front also needs doing. However, again……… Look at our exchange to realise just how good life is, and how many good people there are in the world. https://hosting.photobucket.com/imag...ix/001(73).PNG Have I mentioned, Life is good. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
WHOA, fantastic PHOTOS AND FOOD too!
Thanks for sharing...subscribed |
All times are GMT -4. The time now is 05:51 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com