Re: Project 67 DRGNWGN - 67 Burban!!
ooohhhh ahhhhh!!!nice work..... whats up kev!!
|
Re: Project 67 DRGNWGN - 67 Burban!!
whats up!?
i actually sanded down the paint off the firewall, i just couldnt leave it like that. i know a lot of people dont even notice the firewall, but i didnt want to leave it with thos contamination spots everywhere. pics comin by the end of the week, i already got it wetsanded with 400, hoping to reshoot in the next few days. |
Re: Project 67 DRGNWGN - 67 Burban!!
ok, reshot it monday, and this is how it turned out. the craters are still there, but from before. there was no contamination this time, but the craters were pretty deep and the 2 coats i shot on did not cover them completely. kinda sucks...it looks a lot better person than these pics, but you can see them either way. im thinking either wetsand with 1500, then 2000 and buff. or..scuff and shoot a few more coats.
im not going to sand down and fill them with filler, there is just too many... heres some pics.. http://i5.photobucket.com/albums/y15...027_165450.jpg http://i5.photobucket.com/albums/y15...027_165438.jpg |
Re: Project 67 DRGNWGN - 67 Burban!!
and i lied lol
looks like finger paint! wetsanded with 400, fingerpainted some filler in the craters, hoping to reshoot on monday. i only did the passenger side since there will be the wires and booster and steering column in the way on the driver side....well see it turns out! http://i5.photobucket.com/albums/y15...028_173010.jpg |
Re: Project 67 DRGNWGN - 67 Burban!!
You've got more patients than me....
That's one of the reasons I Line-X my engine compartments and wheel wells. Plus it makes it super easy to clean, doesn't show scratches, and doesn't get messed up my fluids and solvents. Gonna look good when done thought. Keep up the good work! Posted via Mobile Device |
Re: Project 67 DRGNWGN - 67 Burban!!
lol..i wish i had patience...
i was gonna leave it...but i just couldnt do it, not after all this work. im gonna only rework the passenger side, as its the flat side that everybody sees. i knew i would regret it if i didnt fix it now. with that being said...this is the last time im redoing this lol. as long as there is not contaminents on this last spray, it should look a lot better. sooo..pics coming tomorrow, i sure hope i have some good luck |
Re: Project 67 DRGNWGN - 67 Burban!!
keep at it! :chevy:
|
Re: Project 67 DRGNWGN - 67 Burban!!
if it does you could always just spray some bed liner on it ;) ..... but either way its looking good, and good luck :)
|
Re: Project 67 DRGNWGN - 67 Burban!!
Can't wait to see some pics this evening of today's progress!
|
Re: Project 67 DRGNWGN - 67 Burban!!
what no updates of the progress??? ;)
|
Re: Project 67 DRGNWGN - 67 Burban!!
lol i lied
anywho...heres some i snapped this morning. still not perfect, but it looks better to me. im thinking i might wetsand with 1500-2000 and buff the passenger side.... http://i5.photobucket.com/albums/y15...030_082345.jpg http://i5.photobucket.com/albums/y15...030_082423.jpg http://i5.photobucket.com/albums/y15...030_082359.jpg |
Re: Project 67 DRGNWGN - 67 Burban!!
It looks a whole lot better this time, good work. The white Chevy outside was sneaking inside when you would leave the burb, and caused all those problems, it's really jealous of it's big brother getting all the garage time, haha.
|
Re: Project 67 DRGNWGN - 67 Burban!!
Quote:
anywho, hoping to maybe buff the firewall this weekend, OR, start hanging the entire front clip back on so can get to work on the body work....OR scuff up and paint the core support..i cant decide what i should do. |
Re: Project 67 DRGNWGN - 67 Burban!!
buff, scuff, paint, then hang would be the order I'd recommend :D
|
Re: Project 67 DRGNWGN - 67 Burban!!
X2.... Great story about the garage!
Posted via Mobile Device |
Re: Project 67 DRGNWGN - 67 Burban!!
good idea....
i need to try to an organize my front clip bolts to make sure i have them all, trying to avoid a new kit. is there a reference as to what size bolt goes where on the front clip? |
Re: Project 67 DRGNWGN - 67 Burban!!
i ended up finding all the bolts using the lmc catalog, it doesnt have the bolt sizes, but i just used my noggin and ended up having them.
i do have a quick question though, does anyone know if the stock hood hinges will work with a 22" rim? i have clearanced my driver side fender to work with the tires i have now, which are 215/70/15's...right at 26.85" (i have about an inch and a half of clearance without the motor in). the 22's i have are 235/30/22, which is 27.55" tall. im thinking of maybe moving to 265/35/22 in the future, which is 29.3" tall. im not sure if those would clear, or even the rim i have now would clear. cant put them on yet because i still need to order adapters. im thinking of just chopping off what i need and go porterbuilt hinges, but i just dont have the coin for that now, but if i have to run them at some point, i will. any input on this before i waste half my day clearancing the passenger fender? |
Re: Project 67 DRGNWGN - 67 Burban!!
bump on the previous post, in the meantime i chopped some out the passenger fender anyways and went ahead and bolted the front clip up.
http://i5.photobucket.com/albums/y15...107_163107.jpg http://i5.photobucket.com/albums/y15...107_163055.jpg http://i5.photobucket.com/albums/y15...107_163239.jpg |
Re: Project 67 DRGNWGN - 67 Burban!!
looking great man!!!
|
Re: Project 67 DRGNWGN - 67 Burban!!
No go on the hinges man. I just ordered my PB hinges today. I have a 27.5 tire and was about 1/2 inch off the stock hinge. No cupped lca, trimmed cups nothing. Any further mod and your on that hinge. PB hinge or the grant kustoms hinge. PB $410 delivered grants $80 delivered but no means of holding hood open. You have to fab something up.
Trucks looking good man. Posted via Mobile Device |
Re: Project 67 DRGNWGN - 67 Burban!!
so im gonna have to ditch the stock setup? dang....
i really would rather have the pb setup, it just looks so much smoother. maybe i can find a set in the beginning of next year that someone is selling.... has anyone used the grant kustom hinges? i havent seen anyone run those.... |
Re: Project 67 DRGNWGN - 67 Burban!!
those fisheyes looks like contamination maybe water or oil in your air lines are you using a compressor with a dryer system?
Quote:
|
Re: Project 67 DRGNWGN - 67 Burban!!
only solution ive seen is like i have, reverse tilt hood or i have seen some1 move the hinges inside(closer to the motor) but cant remember what kind they were or what the drivers side looked like (with the steering column) decisions, decisions good luck thou
Quote:
|
Re: Project 67 DRGNWGN - 67 Burban!!
I think I read they were using Mercedes hinges, but Porterbuilt makes some nice ones. Kev, the burb looks great it has the right stance. Are you sure you wanna go 22s all around and not 20 22 combo? It may solve some of your clearance issues.
|
Re: Project 67 DRGNWGN - 67 Burban!!
Quote:
http://grantkustoms.com/catalog/imag...Shoodhinge.jpg Quote:
http://i5.photobucket.com/albums/y15...815_093751.jpg |
All times are GMT -4. The time now is 10:33 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com