Re: project INCREDIBLE HULK 6.2L with 6L80E
 

x2

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

Is the rear cab piece cuStom order///??

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

the ls6 has the cathedrail shaped ports, and the l76 intake has the big retangular shape ports...you can not inter-mix the two...the l76 flows more do to the bigger runners....no it did not come with the MAP sensor...no problems at all with useing the TB, everything clears nicely..

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

yes, made to order...call scotts (they're a vendor) and tell them you want one...

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

Problems with the PB arms?

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

I like those PB arms, not a Bad idea

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

no, the arms are like they should be...they had a added 1" more drop built in, then the previous setup...so when the PB arms were installed it lowered the truck 1", and caused interference with the logo.

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

getting some work done on the hulk... moved into a bigger shop, and finally got back to 'working' on the projects again....i got the rear seam filler piece fitted, and tacked on...it was a great fit, only did some minor trimming on the rear (where the rear back glass channel is...it was a bit long....but thats probley because it can fit on a small back glass truck too)
the process wasnt to bad, i trimmed out the sharp edge where the roof meets the back of the cab... and cleckoed it in place, traced around the filler piece, and cut the excess off..then i cut the tabs i used for the cleckos off, and primed the back side off the panels....and tacked the pieces together, still need to tack the back side (along the rear glass channel), final weld, and smooth....
http://i25.photobucket.com/albums/c8...k/P2010007.jpg
http://i25.photobucket.com/albums/c8...k/P2010004.jpg
http://i25.photobucket.com/albums/c8...k/P2010005.jpg
http://i25.photobucket.com/albums/c8...k/P2010006.jpg
http://i25.photobucket.com/albums/c8...k/P2010008.jpg
http://i25.photobucket.com/albums/c8...k/P2020001.jpg
http://i25.photobucket.com/albums/c8...k/P2020002.jpg
http://i25.photobucket.com/albums/c8...k/P2020003.jpg
http://i25.photobucket.com/albums/c8...k/P2010010.jpg
http://i25.photobucket.com/albums/c8...k/P2020004.jpg

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

http://i25.photobucket.com/albums/c8...k/P2020005.jpg
http://i25.photobucket.com/albums/c8...k/P2020006.jpg
http://i25.photobucket.com/albums/c8...k/P2020010.jpg
http://i25.photobucket.com/albums/c8...k/P2020009.jpg
http://i25.photobucket.com/albums/c8...k/P2020008.jpg
http://i25.photobucket.com/albums/c8...k/P2020007.jpg

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

Looking good!!!

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

That new shop looks comfortable..

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

my my how we are movin on up...
1) where's the flat screen? I see the shelf up on top but no tv!
2) you know how i like a clean area so what's with the leaves and scrap metal on the floor?:uhmk:

seriously though; those working conditions look ten times better!:metal:

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

Don, Nice work on the filler piece. Man that shop looks great! Looks to be plenty of room too. There goes the shop rate through the roof:(

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

looking good Don!

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

thanks everyone, shop is alot better... i keep it at a nice 69*....it has A/C too, which im excited about that too come summer time...but with it snowing outside and freezeing cold, the shop makes it nice to work....

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

Hey 68,
Can you tell me where to get that bulkhead connector you used for wiring? I read earlier you got it from work, but do you know a supplier? I'd love to use one on my 63 project I have coming up soon. Also, what pins does it use?

Thanks

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

ill go thru my receipts and find who the manufacture is, and let you know...

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

got the filler all welded on...an a coulpe of shots of how it use to look, for compairison
http://i25.photobucket.com/albums/c8...k/P2050005.jpg
http://i25.photobucket.com/albums/c8...k/P2050004.jpg
http://i25.photobucket.com/albums/c8...k/P2050003.jpg
http://i25.photobucket.com/albums/c8...d/P2050006.jpg
http://i25.photobucket.com/albums/c8...d/P2050007.jpg

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

wow, that does look a lot better... goes with the shaved drip rail now...

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

Thank you. This truck is coming along great. I've been reading all of your build posts. Getting tips and inspiration for my upcoming project. 63 short step getting an LS3/4L65E.

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

avionicsinternational.com is their web site...
the plugs PN is 206151-1 and 206150-1
the pins are PN 66099-1 (males) the female pins PN isnt legible...
but there should only be one pin style fot that plug.

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

got a little bit done yesterday, removed and re-installed the center x-member.. installed the raised one in its place, cause we want to run a 1 piece driveshaft...so in doing that the cab floor was cut, and the cab was placed back on the frame (to check how good of measureing i did for the DS loop).... it went on as planned.....i also had to trim more of the fender for it to fit on, i knew tthis would need to be done, since we switch to drop spindles with the new brakes..and or coarse pics of the progress/stance with 22/20 combo
http://i25.photobucket.com/albums/c8...k/P2050002.jpg
http://i25.photobucket.com/albums/c8...k/P2060003.jpg
http://i25.photobucket.com/albums/c8...k/P2060006.jpg
http://i25.photobucket.com/albums/c8...k/P2060007.jpg
http://i25.photobucket.com/albums/c8...k/P2060004.jpg
http://i25.photobucket.com/albums/c8...k/P2060005.jpg
http://i25.photobucket.com/albums/c8...k/P2060008.jpg
http://i25.photobucket.com/albums/c8...k/P2060009.jpg
http://i25.photobucket.com/albums/c8...k/P2060010.jpg
http://i25.photobucket.com/albums/c8...k/P2060011.jpg

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

can't believe I never caught this thread til now. guess I've been slackin' on my board reading.
nevertheless AMAZING job!
if all of us could have 1/4 of your talent there'd be a lot more perfect or near perfect restores and customs running around out there.
Keep the pics coming!
:metal:

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

What a cool build...I love all the outta the box thinkin....keep it up. :)

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

Think you have the "tuckin" issue covered! Sweet work Big Daddy! I'm diggin the two tone green for sum reason!:crazy: