Re: ''Project '64 SYT Super Yenko Truck"
 

Actually the smaller the exhaust the more backpressure you will get to help increase low end torque. A 3" exhaust is really only for very high rpm applications. Much like a tunnel ram. Both of these will kill low end torque but increase hp in the highh end. If you're not going to rev over 6000 then neither one will do much for you. Except make the truck really loud!!

Re: ''Project '64 SYT Super Yenko Truck"
 

ok ill miss the look of the 3 in though hey can i put 3 in ends on it
like some 45s

Re: ''Project '64 SYT Super Yenko Truck"
 

If it's after the muffler it won't make much difference but it might give it a hollow sound.

Re: ''Project '64 SYT Super Yenko Truck"
 

hell ill just leave it open
wait hollow like an echo tip

Re: ''Project '64 SYT Super Yenko Truck"
 

yeah similar.

Re: ''Project '64 SYT Super Yenko Truck"
 

hell i made some 3 1/2 in 45s out of some echo tips and ill use those

Re: ''Project '64 SYT Super Yenko Truck"
 

ummm
its cold
and theres a ferd in the shop (not mine)
and its cold
did i mention its cold

Re: ''Project '64 SYT Super Yenko Truck"
 

the guy that was supposed to buy the mufflers didnt come by today because he didnt because it was to cold
he does masonry work and is working in a close town
i think hes going to buy them but im going to give him a week because ebay screwed him on a shifter and he needs to make sure he gets it before he buys anything else.
ill sell them though heres a linky

Re: ''Project '64 SYT Super Yenko Truck"
 

man theres still a ferd in the shop
we have to put a throwout bearing in it and put some better brakes on so itll be ready for show season next year

Re: ''Project '64 SYT Super Yenko Truck"
 

show season?

Re: ''Project '64 SYT Super Yenko Truck"
 

car show season

Re: ''Project '64 SYT Super Yenko Truck"
 

not really a season but when most of them are going on

Re: ''Project '64 SYT Super Yenko Truck"
 

you have a show ferd?

Re: ''Project '64 SYT Super Yenko Truck"
 

ill get some pics up in a minute
waiting for them to load

Re: ''Project '64 SYT Super Yenko Truck"
 

ok heres the pics
its a 1970 mustang mach 1 351c 4 speed ram air
http://i886.photobucket.com/albums/a...CLASSICS26.jpg
http://i886.photobucket.com/albums/a...CLASSICS28.jpg
http://i886.photobucket.com/albums/a...CLASSICS29.jpg
http://i886.photobucket.com/albums/a...CLASSICS30.jpg
http://i886.photobucket.com/albums/a...CLASSICS31.jpg
http://i886.photobucket.com/albums/a...CLASSICS33.jpg
http://i886.photobucket.com/albums/a...CLASSICS34.jpg

Re: ''Project '64 SYT Super Yenko Truck"
 

Now that's a nice Ferd. :metal:

Re: ''Project '64 SYT Super Yenko Truck"
 

ok, i'm gonna let it slide this time. :lol:

Re: ''Project '64 SYT Super Yenko Truck"
 

thanks

:haha: good but this is why i cant work on my :chevy:

Re: ''Project '64 SYT Super Yenko Truck"
 

well I know why he wanted your truck out of the shop.

Re: ''Project '64 SYT Super Yenko Truck"
 

well atleast it's old metal.

Re: ''Project '64 SYT Super Yenko Truck"
 

i saw this one in person..
no matter hwo he down plays it.. i would make babies in this car...
period..

Re: ''Project '64 SYT Super Yenko Truck"
 

:haha: good choice of words justin

Re: ''Project '64 SYT Super Yenko Truck"
 

Nice ford..but the wheels are terrible

Re: ''Project '64 SYT Super Yenko Truck"
 

yeah i know
it needs some draglites :metal:

Re: ''Project '64 SYT Super Yenko Truck"
 

Any of these would look awesome on that Mustang. :metal:
Anybody have Photo Shop?

http://www.americanmuscle.com/mustangwheels.html

http://ep.yimg.com/ca/I/mustangtuning_2081_1335160432

Re: ''Project '64 SYT Super Yenko Truck"
 

hes not into the big wheels
maybe some cragars he says
bugeye my dad said send him some money and hell change em to watever u want :D
im still thinkin draglites or maybe some centerlines

Re: ''Project '64 SYT Super Yenko Truck"
 

I have some crager SS with 3 spoke spinners. They have the inserts spacers for the studs. they were on a s10, but im sure if you get the right inserts you could make them 5x5

Re: ''Project '64 SYT Super Yenko Truck"
 

I've always liked the Torque Thrust Wheels
http://asp.americanracing.com/dealer...ga/mVC4051.jpg
Here's your Draglite's from JEGS
http://www.jegs.com/images/photos/927Draglite.jpg

Re: ''Project '64 SYT Super Yenko Truck"
 

yeah my crager ss would look better/

Re: ''Project '64 SYT Super Yenko Truck"
 

well im tryin to find a good picture
of the cragar ss to photoshop
does anyone else have better photoshopping skills than me

Re: ''Project '64 SYT Super Yenko Truck"
 

Re: ''Project '64 SYT Super Yenko Truck"
 

i give up on the photoshop thing

Re: ''Project '64 SYT Super Yenko Truck"
 

there is a section of this forum for making a photoshop request............... but they may not work on a ferd.......... :lol:

Re: ''Project '64 SYT Super Yenko Truck"
 

Don’t know if this will help with your Photoshop efforts, but here are a few shots of mine when I was still running Draglites. The fronts are 15x5 and the rears 15x8.

http://img215.imageshack.us/img215/8044/weld01.jpg
http://img215.imageshack.us/img215/5678/weld02.jpg
http://img692.imageshack.us/img692/2562/weld03.jpg

Re: ''Project '64 SYT Super Yenko Truck"
 

See gage, the only people posting pics of old chevy trucks in your thread are visitors...................

I'm just sayin...............

Nice truck btw! :D

Re: ''Project '64 SYT Super Yenko Truck"
 

yeah fords suck
but dont tell my dad that :D

Re: ''Project '64 SYT Super Yenko Truck"
 

How can you say ferds suck when you own one!

Re: ''Project '64 SYT Super Yenko Truck"
 

IT WAS FREE!!!!!!!!
and it has a knock
still not sure what it is

Re: ''Project '64 SYT Super Yenko Truck"
 

Maybe it's your exhaust gasket!

Re: ''Project '64 SYT Super Yenko Truck"
 

Take the hammer out of the engine. The knock will go away. :haha:
BTW Gage did you change your name?