![]() |
Re: What Did You Do With Your Truck Today ?
That's what I like to see, a great classic truck being used as a truck. My hat is off to you.
|
Re: What Did You Do With Your Truck Today ?
Scored a motor for my drill press at an estate sale for $10. No cheep China poo, this one is from the 60's, made in USA and never used. The guy said his dad had it around as a spare. Perfect fit and runs like champ. I have some things I have been holding off fabbing until I got it running again. Now why can't I find those hub caps I want for that price???
|
Re: What Did You Do With Your Truck Today ?
Quote:
Thanks! |
Re: What Did You Do With Your Truck Today ?
Install new tires!!!
Posted via Mobile Device |
Re: What Did You Do With Your Truck Today ?
Actually it was a few days ago, but I got my truck inspected - good for another year!! I'll bet when those guys on the assembly line put in the windshield, they never dreamed it would one day have a '2013' sticker on it! I'm driving it to work tomorrow to pick up a shelving unit they're throwing out.
|
Re: What Did You Do With Your Truck Today ?
Spent the last few evenings welding up the stake pockets & all of those annoying extra holes in the bed!
|
Re: What Did You Do With Your Truck Today ?
Quote:
|
Re: What Did You Do With Your Truck Today ?
Bought paint for the steering wheel. Should have researched the paint cost, could have gotten a finished one on Ebay for less. But I have other ideas for the interior to accent the wheel and I can use the epoxy primer on my bed rails.
|
Re: What Did You Do With Your Truck Today ?
3 Attachment(s)
Sold my daily driver yesterday and now driving the 59 until I find a suitable replacement daily driver. First time really hitting the streets since it passed inspection. There are some glitches! Forgot to put a jumper on my alternator from + post to the #2 terminal and boiled my battery! whoops, hopefully it's ok. Developed a leak in heater hose. Fixed both on my lunch break! Here is a before pic and a couple from a few weeks ago after I color matched spray bombed my body repairs:metal:
|
Re: What Did You Do With Your Truck Today ?
Quote:
|
Re: What Did You Do With Your Truck Today ?
Quote:
|
Re: What Did You Do With Your Truck Today ?
Inventoried part in my bins, and tore apart the stock wiring harness to see what I need to, or can, salvage. That wire is really brittle, found lots or exposed wire, I do not know how it did not burn to the ground.
|
Re: What Did You Do With Your Truck Today ?
Re-assembled and installed new lower bearing and turn signal swtch assembly, and primed my Van Tilt Coulmn that I recently chopped. see my build, just waiting for no wind to paint it , see my build for pic's :ito:
|
Re: What Did You Do With Your Truck Today ?
painted the hood with sealer and going to paint it in the morning.
|
Re: What Did You Do With Your Truck Today ?
Quote:
Love the fleetsides! |
Re: What Did You Do With Your Truck Today ?
Quote:
|
Re: What Did You Do With Your Truck Today ?
I used some money I got from scrapping to buy a sawz all and an angle grinder yesterday. Today I got to work. Cut off the S10 body mounts and ground them down as best I could, pulled my doors and am about to start working on the cab...hear those are a bit heavy.
Posted via Mobile Device |
Re: What Did You Do With Your Truck Today ?
1 Attachment(s)
For anyone that is thinking using the existing 53 (or older) harness is a good idea take a look. This is one example of what I found, all it needed to do was short to the firewall and bad things would have happened. I found similar problems on the front lighting harnes, rear harness and under the dash. In 80 when I added a fuse panel I checked all the wiring and decided it was OK, guess 30+ more years takes it toll.
|
Re: What Did You Do With Your Truck Today ?
Looks like the hot red 10 gauge wire to ignition, must have changed over from generator to alternator that put out more amps and heated the wire!
Quote:
|
Re: What Did You Do With Your Truck Today ?
Nope, I was running the stock generator until I took it apart. You are right it is the harness that goes down to the solenoid.
|
Re: What Did You Do With Your Truck Today ?
If you are going to replace only the wire put an inline fuse rated for the output of the generator so that fuse blows before the wire heats up. If it pop's (burns fuse) than generator or regulator is faulty causing wire to heat up due to increase current flow.
Quote:
|
Re: What Did You Do With Your Truck Today ?
4 Attachment(s)
Painted my Tilt Coulmn yesterday no wind and no runs! Also I have been asked why I welded the home made support at bottom, two reasons from the outside looks real nice, and inside carpet will go around bottom won't be seen. I found a two piece chrome thing that used for closet or sinks can't remember which at Home Depot that will fit at bottom of column still debating if I will use it but fits the coulmn perfectly!
|
Re: What Did You Do With Your Truck Today ?
looked at it. there was too much wind to weld.
|
Re: What Did You Do With Your Truck Today ?
I weld indoors and paint outside, I think I got the two mixed up.:uhmk:
Quote:
|
Re: What Did You Do With Your Truck Today ?
Quote:
|
Re: What Did You Do With Your Truck Today ?
4 Attachment(s)
I built a frame for the back bed and put a piece of plywood on top so i can use the truck to carry all my junk to the good-guys car show this week end. i took the truck out for it's first ride last night ever! It runs good i am very happy with it so far still have lots of bugs to work out but she is moving!
Thanks Ray |
Re: What Did You Do With Your Truck Today ?
Nice job on the frame. Is it inch and a half? I can't recall ever seeing plywood with the grain running on the 4ft.
|
Re: What Did You Do With Your Truck Today ?
The steel is 1" and the ply wood is 1/2" i used two sheets. I just did it for the show because i didn't have time to build a nice wood deck for it yet.
Ray |
Re: What Did You Do With Your Truck Today ?
Bed looks nice.
I ordered the cab mounting kit for mine. Hopefully I can get it on the frame in 2 weeks. This weekend I hope to have the rear end painted and the engine mounts finished. |
Re: What Did You Do With Your Truck Today ?
ocusedontheprize they are never done! lol
Ray |
Re: What Did You Do With Your Truck Today ?
I put the 2013 sticker on my tag
|
Re: What Did You Do With Your Truck Today ?
I dropped my gas tank and discovered that I need a new one. Yay! :cuss:
|
Re: What Did You Do With Your Truck Today ?
Ran it out of gas.
Guess maybe ill fix the gauge. HAHA Posted via Mobile Device |
Re: What Did You Do With Your Truck Today ?
Test fitting the motor....
http://i202.photobucket.com/albums/a...y/5c16f393.jpg Posted via Mobile Device |
Re: What Did You Do With Your Truck Today ?
Mocked the body onto the new frame.
|
Re: What Did You Do With Your Truck Today ?
Quote:
|
Re: What Did You Do With Your Truck Today ?
Since I'm not going to use tail tailgate chains, I wanted to fill the void on the tailgate. Cut a piece of angle iron and weded it right up. Turned out pretty good.
|
Re: What Did You Do With Your Truck Today ?
Quote:
|
Re: What Did You Do With Your Truck Today ?
I looked at it and thought about my coil-over mounts. tomorrow i will put the cover back on my rear end. bad gears and all. then I can finish the suspension mock up.
i will worry about the gears later. It will be a good excuse to change ratios for the four speed. |
Re: What Did You Do With Your Truck Today ?
1 Attachment(s)
Body work and fixed the tailgate trunions so they are perpendicular to the tailgate instead of angled 3/16".
|
All times are GMT -4. The time now is 03:41 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com