Re: 67 GMC super custom build
 

Not for my truck but I got this made to hang on my garage wall. I might paint it like my 67 will be painted.

Re: 67 GMC super custom build
 

That is awesome! Where did you get it from?

Re: 67 GMC super custom build
 

I had a buddy make it on his cnc table. It is nice

Re: 67 GMC super custom build
 

Those buddies with the high dollar fun tools sure come in handy! I will show this picture to my friend with a 12' Plasma Cam table and give him a nudge... hinting how cool it would be if he would make a 72' Chevy for me!;)

Re: 67 GMC super custom build
 

I have had my precision seals on this cab for over 2 years and I still had to slam the doors. So I bought these door seals from Honda and wow. Closes like a new door. And my locks now work smoothly. They also have no cut and fit perfectly. I would recommend them over the precision press ons.

Re: 67 GMC super custom build
 

I keep hearing the same situation from several builds here. I guess I should just not even waste my time trying the Precision seals and go straight to the Hondas.;)

Re: 67 GMC super custom build
 

Take a picture of the inside lip on those seals, show folks what they look like. I went with precision now as well because of the way it looks not covering that inside lip and has a "bulge" to it with an extra inside strip that fit the civics trim. At least that was my experience with the civic seals I tested.

.

Re: 67 GMC super custom build
 

I also tried the Civic seals. They do fit great and the doors closed really easy, but I opted for the Precision press on seal for the same reason TA mentioned.

Re: 67 GMC super custom build
 

The last truck I had the metal around the top driver hinge was actually cracking around the hinge so I'd rather have the doors close nice. I'll get over the lip.

Re: 67 GMC super custom build
 

In no way were we trying to be critical. I think it is a good choice. I just wasn't aware of the extra piece of rubber that would be on them when I purchased them. I think TA was just pointing that out so others knew. I love your build and you are doing a great job. Sorry if it came across as negative.

Re: 67 GMC super custom build
 

I never took it that way. Now that I read back I'd did sound kind of funny. Was just typing fast at work lol

Re: 67 GMC super custom build
 

Picture of the inner lip that was mentioned. I wonder if it's possible to trim it off and still have it look good or glue it down to itself so it looks smooth?

Re: 67 GMC super custom build
 

I bought new 66 Chevelle door latches and just modified the top end so my door handle pin will hit it. Now the door will stay locked if you close the door with the button on. That's why I needed softer door seals. This operation was impossible with the precision pieces. I always hated the original door latch system. Wish they changed to this system in 67 for the new body style.

Re: 67 GMC super custom build
 

Those look pretty neat. How much did they cost? Ive been looking at the Altman latches.

Re: 67 GMC super custom build
 

These are the 2 I purchased. I am super happy with them. Another reason I went this route is that power locks are useless if you can't close the doors and the locks pop up everytime.

https://www.ebay.com/itm/1965-67-Che...53.m2749.l2649

https://www.ebay.com/itm/1965-67-Che...53.m2749.l2649

Re: 67 GMC super custom build
 

I often wondered about that with power locks. Sounds like a nice upgrade idea. Will you be cutting out your original latch location on the cab and making it flush?

Re: 67 GMC super custom build
 

Absolutely. On the door and the the pillar.

Re: 67 GMC super custom build
 

I look forward to seeing it. Then I can decide what to do with mine.

Re: 67 GMC super custom build
 

So your locks would pop up on original door latch system when you shut them? Mine don't do that. I also have the precision door seals and power locks and they work fine. I did modify the connection point for the door lock actuator so it's easier on the actuator but other than that I don't see that issue. I curious to see why your locks pop up like that.

:chevy:

Re: 67 GMC super custom build
 

Every 67 72 I've ever had when you lock the door and close it the lock would pop up leaving me to lock it with a key and I'd have to wait for the passenger to close their door to activate the power lock switch or I'd have to walk around and use a key. The 67 chevelle ones do the same but if you hold the button in and close it the lock will hold down keeping it locked.

Re: 67 GMC super custom build
 

Foot in mouth man. I just went and tested this and sure enough mine do same thing. I'm still finishing my first truck and guess I have never tested this sequence before. Now I'm REALLY glad I put power locks in, that would be annoying to have to use the key to lock every time... Was this designed specifically to keep you from locking your keys in truck? If so, that's kinda cool really.

Thanks for the lesson chewy.

:chevy:

Re: 67 GMC super custom build
 

How do your stock handles actuate those? They look like they are a lot lower than stock.

Re: 67 GMC super custom build
 

Here's a picture of the inside. I put a rubber cap on the end so I can make my lighted lock system work. You need to push it in 1/8 inch to ground the relay.

Re: 67 GMC super custom build
 

67 never had these pressure vents so I think I'll add one to each side where the old catches were.

Re: 67 GMC super custom build
 

I'll bet it was done this way to keep you from locking yourself out. Even with my car set up it will still pop up. It will only stay locked if you hold the button in when you close it.

Re: 67 GMC super custom build
 

I trimmed the lip on the Honda seals and this is how they look. I am ok with this. If you put the seal on a bigger table and cut it smoothly throughout the whole seal it looks good.

Re: 67 GMC super custom build
 

Nice job. They look good from the pic but hard to see the details on it. That and the squarebody was distracting my focus ;)

I am gonna try that on the set I have. You just use a razor blade knife?

Re: 67 GMC super custom build
 

I just used a thicker blade (1") olfa knife so it didn't flex. Just have to be real smooth and it will look very good. If you cut too deep you will hit metal. This was my 1st one. I'll have to get another passenger side and do it again. You have to learn somewhere I guess.

Re: 67 GMC super custom build
 

This is my next project as I'm waiting for metal work. I'm going to take new t3 headlights and split them and put the faces on the newer rear cases. Just another stock looking detail I would like to have. https://www.hotrod.com/articles/1006...ide_front_view

Re: 67 GMC super custom build
 

That turned out much better than I imagined it would. Nice work

Re: 67 GMC super custom build
 

This is probably the most useless option in the catalog of gm parts from that era but it is rpo CE1. Headlight washers. Came on Chevelle corvette and Camaro and probably anything else gm made. I wasn't going to add this but I got bored so I'll figure out how I'm going to make this work. The absolute only option I don't have that I tossed around is V75 liquid tire chain. If I could find a complete set up of that I know how I would make it look stock but good luck finding it anywhere.

Re: 67 GMC super custom build
 

100% on brand. I love it.

Re: 67 GMC super custom build
 

I added these door harness grommets from a 66 buick to pass the wires thru the door to my panel. Looks clean and keeps it era.

Re: 67 GMC super custom build
 

Passenger side. It just barely clears the motor. The vent window frane sits quite a bit away from it. This sideshows better from the inside

Re: 67 GMC super custom build
 

Oh, wish I knew about those a year ago!!! Dang.... Very nice.

Re: 67 GMC super custom build
 

Trying to get the dual air cleaner set up properly and moching up some other small stuff before the metalwork starts. I thought this looked cool. Kind of like a real life exploded view.

Re: 67 GMC super custom build
 

Dave Kindig is working on a convertible C-10...maybe a '67. I think it's going to be the season finale. Looks like you've got him beat. I doubt his will have headlight washers.

Re: 67 GMC super custom build
 

LOL. Everyone wants a C10 Vette it seems. I wish I had his team and cash flow to do a build. It would Be a blast. Here is what I figure on the air cleaners. I wish I could find the original hoses in good condition. That will be tough. I'll probably spray these to look like the rubber ones used original. It's as close as I can find with a smooth inner wall and heat resistant.

Re: 67 GMC super custom build
 

Ha. The other one came off clean but the one on my air cleaner is already destroyed. I have a picture of the air cleaner decal with correct number here. Any chance you could make it? I have another here but has a corvair part number on it. I could send you the repo I have with the different part number on it for correct sizing if you need.

Re: 67 GMC super custom build
 

I hit a snag with my headlights. The octane housings that I have are not big enough to accept the face of the T3 lenses. This thread has the same problems. https://www.jalopyjournal.com/forum/...ights.1209713/. I don't want to wreck the octane lights so I'll look for hella's that will accept the t's lenses as he did and sell the octane lights. Also the headlight bezel won't have enough room to put both headlight washers on the upper part of the low beam so I'm not sure if I'm going to put one on top and bottom or one on high and one on low.