![]() |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Glad to see you making such good progress. Looking sharp in the coat & tie!
Your mate Kevin's car is outstanding, I actually think the current vw indicators look right on that size car. But what do I know about British cars... Anyway, Have a GREAT weekend! |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
Trust all is good with you and the family. You are right, Kevin’s car though pretending to be a Deusenberg is a Jaguar engin in a Rolls Royce. It is a lovely thing, and the fact that he is self taught, right down to the aluminium stretching and upholstering, is pretty impressive. [quote author="@grizz" source="/post/2702767/thread" timestamp="1634973674"][quote timestamp="1634972234" source="/post/2702766/thread" author="@kevins"]There are no seals they rely on the seals in the wheel bearings, to change these you need a slide hammer to get the shafts out and a press to get the bearing and retaining ring on, fortunately bearing kits are only around a tenner. I'd do both if I were you.[/quote]Time to scrap this barsteward of a thing. More tools I do not have. [/quote] So it looks like I am way too committed to this thing. Maybe I should be committed, or get on with it. Just spent some more cash. From the £49.50 per calliper, this is where that ended so far. Brake lines and hardware will add to that of course. https://hosting.photobucket.com/imag...Render(51).jpg I really dislike working with dirty parts, even if they are broken, non functional, or getting replaced. https://hosting.photobucket.com/imag.../IMG_8982.HEIC As a bit of Zen searching last night when I realised that this thing has thrown me another curved ball, I thought wasting a bit of fresh petrol, maybe a liter in total, I would at least clean up the rear drums and their parts. https://hosting.photobucket.com/imag...x/IMG_9156.JPG Result. https://hosting.photobucket.com/imag.../IMG_9162.HEIC Next one. Dry, no leaks, but it will have to be done while I do the other side. https://hosting.photobucket.com/imag...Render(50).jpg And done. https://hosting.photobucket.com/imag.../IMG_9164.HEIC I have decided to step away from the build for today, if I can get it right, and do the hedges and garden beds for the last time this season, hopefully. Maybe cut the grass too. Oh, and see Sally. Nice day out. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Yup…….
I like animals, and love them visiting. George from two houses down spent a lot of time here yesterday while we were clearing up the garden. https://hosting.photobucket.com/imag.../IMG_9214.HEIC https://hosting.photobucket.com/imag.../IMG_9218.HEIC I cut all my hedges, and Mickey’s next door as he hates doing it. Sally cleared garden beds, I raked up pine needles and leaves, followed by cutting the grass. Once all that was done, including going to Sallys place to sell her cross trainer and see it leave she went in to watch Gogglebox, one of her few luxuries that I can’t abide. So I went to the garage for a couple of slow hours to do little jobs. Nothing mechanical, just sorting stuff out, rearranging my carp. Eventually gave up and grabbed a pair of pliers and the Dewalt with a decent 6mm bit……..l Been wanting to do this job since getting the Rezin Rockit. Drilling out all the rivets. Now you see them. https://hosting.photobucket.com/imag.../IMG_9238.HEIC Now you don't. https://hosting.photobucket.com/imag.../IMG_9239.HEIC Fiberglass resin filler for the holes next. I left the steel tabs, for now, they may become part of the fake door latching mechanism. No bootfair, no plans today. May take the S10 for a drive……. Just need somewhere or someone to visit. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Seems cables have been stolen in my area.
Non existent internet and wifi as a result. Phone has a bit of 3G or 4G that comes intermittently. Went for my 6km walk yesterday, what a lovely day. Also gave me time to take a break from the Rezin Rockit. Thames river and Essex. https://hosting.photobucket.com/imag.../IMG_9255.HEIC And looking back toward the Medway river. I love being surrounded by large water masses. https://hosting.photobucket.com/imag.../IMG_9253.HEIC And one of my turning points, where some magic continues to happen. https://hosting.photobucket.com/imag...2A1E1DB3CC.jpg Up closer, changes every day. Hood ornament and mount added now. https://hosting.photobucket.com/imag.../IMG_9258.HEIC Later the day I took the truck, went for a drive, did some shopping and had a guy in a Tesla speak to me, telling me he loved the truck and the sound. The Tesla is his company car and he made an interesting comment, saying is was ultra capable, but has no soul. Quite telling, we as humans do love the advancement of the species, but the visceral qualities of a petrol or fossil fuelled engine still gets us going. The views are always lovely andthe camera does not do it justice. I popped into Kevins on the way home. He has also decided to now go with the VW Beetle indicators on the rear fenders. https://hosting.photobucket.com/imag...6EC6FE3573.jpg All too soon the weekend was over. But the truck made me grin. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Another job that I will hopefully get to soon.
The floor was modified and repaired before I got the car. I am wanting to reinforce, and possibly paint it once done, to match the rest of the fiberglass, to either white, or maybe mask it all and go black on just the floor. A bit ugly right now. https://hosting.photobucket.com/imag.../IMG_9280.HEIC Using some of this impressive fiber filled resin stuff, I filled all the little holes after prepping them and carefully countersinking those (2) I had not gone through completely. https://hosting.photobucket.com/imag.../IMG_9282.HEIC Next step will be a careful rub back with a flat soft block. So that the holes are filled and ready for whatever treatment I decide to give it. Paint, wrap, stickers……. We still need to decide a route for final decoration. https://hosting.photobucket.com/imag.../IMG_9367.HEIC DHL texted early this morning to say they were delivering the front callipers and hardware between 2.54Pm and 3.54pm Looking forward to masking and painting them before fitting over the weekend. I have next Monday, Tuesday and Wednesday off work, so will certainly be spending some time down at the garage. Kettle is on if anyone wants to come help or hinder. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Day job is really getting in the way right now.
And of course shorter days mean that by 6.00pm time is up. Yesterday was a long, busy online day, loads more to do this week. I have about 10-15 hrs of online training to do, 14 modules, each with a 10 question test at the end, and pass mark 90% Still, Mickey knocked at about 4.30pm as I never even heard the couriers deliver despite being here. Happy to say…….. We have parts. https://hosting.photobucket.com/imag.../IMG_9383.HEIC And some of these. https://hosting.photobucket.com/imag...Render(52).jpg Of course shiny and new is lovely. But Red is better. More later. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
So what does £60.00 buy you? Or $83.00 plus shipping.
One of these, without hardware or pads, or paint. https://hosting.photobucket.com/imag.../IMG_9384.HEIC Paint? Oh, and masking up and heating. Heating helps the paint dry faster and more succesfully. https://hosting.photobucket.com/imag.../IMG_9386.HEIC Result. https://hosting.photobucket.com/imag.../IMG_9389.HEIC And then ready for assembly and fitting. https://hosting.photobucket.com/imag.../IMG_9391.HEIC Hopefully I will figure it out when it comes to the assembly and fitting. Any advice and warnings on the reassembly appreciated as always. I do not have @nickwheeler or @kevins and @pauly on site to guide and bollock me when working. Happy with how they came out though, at £180.00 or $250.00 they best be good once fitted. . |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
So there I was doing my daily brisk 6km walk.
Coming back down the last 0.5km I pass two ladies walking an old Labrador, and a cross bred “Labradoodle” that has always been aggressive, goes for anyone that he sees or passes. I always go down and greet him and make a fuss for a few moments, as I really love animals and want him to feel it as well. Yesterday I was trying to set a new target time for the walk, so when Milo the dog went off barking and lunging at me as usual, I gave him a wide berth and kept left. As I passed he lunged and bit me on the upper thigh, hard. Thankfully he seems to have hit the rear pocket of my tracksuit pants. I was livid, and wanted to destroy him immediately. I went off at him, and clearly scared the living daylights out of his owner and the other lady, Labrador owner. I was going to report it to the police in my anger, and pursue his destruction. In the end I calmed down, and later one of my other neighbours popped around to hear what really happened, small village mentality. What does one do in this situation? The owners husband, interestingly has not come to see if I am OK, or apologise. https://hosting.photobucket.com/imag.../IMG_9435.HEIC I was on training meetings till 4.30pm and after that I grabbed a coffee and went down to the garage to try finish painting the chassis that I had spent a part of my lunch break getting started earlier. https://hosting.photobucket.com/imag.../IMG_9426.HEIC So got going again by 5.40 with the Hammerite. https://hosting.photobucket.com/imag...A61DAFD298.jpg By 18.10 it was pretty much dark, and I had turned on the garage lights earlier so that I could finish the painting on the upper side. I also ran out of paint, perfectly when I finished the upper side. https://hosting.photobucket.com/imag.../IMG_9449.HEIC Went to look this morning, not too bad a few spots to touch up where covering is not complete. https://hosting.photobucket.com/imag.../IMG_9457.HEIC Weather is turning, so lets hope it dries nicely before I flip it over. Then we are ready for partial reassembly. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Just a reminder to all who look in here, and care.
It is the yearly Tuba Trucks Toy Drive on November 13 Details copied below. Quote:
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Mickey is heavy on tools.
Currently has my wheelbarrow and making sure it doed not come back as taken. On the way home from getting milk and bread this morning I saw these thrown out down the road. Knocked and asked if I could have them. Home owner helped me load them. Free cash again as I knew I would have been buying a new wheelbarrow soon. https://hosting.photobucket.com/imag.../IMG_9461.HEIC Life keeps giving. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Keep an eye on that bite, if you see any infection get your Butt to a Doctor!
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
Or else you release Eve on me :mm: Got the chassis flipped onto its side today. It is not light, despite appearances. https://hosting.photobucket.com/imag.../IMG_9476.HEIC Used the new paint I got this morning. Done. And I am happy with it so far. https://hosting.photobucket.com/imag.../IMG_9477.HEIC Will get Mickey to help me lower it carefully tomorrow. Slow, but progress is still progress. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Mate Andy in Tulsa sent this video clip today.
How to reduce a spring by 2 inches in 10 seconds. https://youtu.be/7h1PZdJ6d6I Need to find out just why he needs this tool. Not that he needs a reason. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Courier rang my doorbell at 8.45 last night.
https://hosting.photobucket.com/imag.../IMG_9510.HEIC https://hosting.photobucket.com/imag.../IMG_9509.HEIC Guess we are in the braking game now. Loads of little pinging springs to go everywhere. Ohhhh…… Best part, I have three days off work. Kettle is on. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Spent a large chunk of time over at Unit Engineering in Queenborough on the Isle of Sheppey yesterday recharging my manliness batteries.
Went to drop off the three remaining bags of blast media that I never used on the chassis, and tomspend time with mate Darren and some car guys. Also went to convert the CAD pattern pieces into 6mm steel plate. https://hosting.photobucket.com/imag.../IMG_9528.HEIC https://hosting.photobucket.com/imag.../IMG_9546.HEIC Darren just bought in a 2.5 meter bed folder. https://hosting.photobucket.com/imag.../IMG_9542.HEIC Amazing how it folds the steel like it was some toilet paper. https://youtu.be/eS7U8hZX_OM Effortless. https://hosting.photobucket.com/imag.../IMG_9549.HEIC Done. https://hosting.photobucket.com/imag.../IMG_9551.HEIC I will trim the plate to fit both in length, width and height before welding it all together. https://hosting.photobucket.com/imag.../IMG_9559.HEIC Triangulated gusset goes at the rear, against the chassis. https://hosting.photobucket.com/imag.../IMG_9560.HEIC Total overkill, but hey….. it is what was there. Suddenly windy and chilly today, 2 T-Shirts and a hoody weather now. . |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Not much done over the weekend, really rubbish weather, rain etc but was busy, and also rested a bit which was nice.
Last night I thought I would sit in the lounge and assemble the front brake callipers while Sally watched her guilty pleasure “Gogglebox” I can’t abide it and don’t get it. Anyway, I ran into problems moments after starting. One pad went straight in, the second one got gently stuck, and despite trying a few times, I decided to put it down as it was dark outside and the light indoors not ideal. So the question is, do I file a minimal sliver off the edge of the backing plates that seem to stick, or am I missing a trick on the reassembly ? I am not good at force. As @nickwheeler would attest to. https://hosting.photobucket.com/imag...Render(54).jpg It has to be a simple solution, surely. Looking at the original calliper again, I just realised that i never added the thin plates that fit behind the pads. This may be the solution. Along with possibly checking to see if the pistons want to go a bit deeper into the calliper. https://hosting.photobucket.com/imag.../IMG_9660.HEIC Could it be this simple? Will head down to the garage a bit later when it warms up. After all, three days vacation means some real garage time. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
The callipers look good in paint.
I would install the shims along with a touch of copper slip on the back of the pads. Once they are sat on those pins they should all align nicely. If too tight, I would file the edge of the pad - just to remove some of the paint build up. hows the dog bite? |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
Spot on…… All solved with a bit of filing in the vice. The backing plates are guillotined in a factory, and that minimal untidiness on the cut made one plate microspically thicker than it needed to be. Once filled back, easy fit, copper slip and assembled. Dog bite bruise receding. Still pissed at the owners, not the dog. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
I was headed out to go buy a few bits needed for the work planned today.
Just as I was about to leave for town. The doorbell rang, I was out back, and thought it was Mickey next door, shouting at him to come around back, it turned out he was actually on his rear patio too, so I went around and found a cool guest out front. The one and only Nick Wheeler (I do have surname envy) Perfect timing, had he arrived 10 minutes later I would have been down the road in the truck. So we had coffee, cookies, chat and then made our way down to the garage and started to address the brakes. First problem identified was that the back plates are cut by guillotine in the factory, and a small bit of filing back, saw them slip in as expected. https://hosting.photobucket.com/imag.../IMG_9665.HEIC Nick had pre-emptively brought his brake pipe flaring tools and some pipe for us to give making pipes a go. https://hosting.photobucket.com/imag.../IMG_9668.HEIC Man on a mission. https://hosting.photobucket.com/imag.../IMG_9667.HEIC So Nick showed me how to make one pipe, and then it was my turn. How I like to learn. Despite having made up all the nines for the C10 a few years ago, this tool is different and pretty foolproof. https://hosting.photobucket.com/imag.../IMG_9670.HEIC https://hosting.photobucket.com/imag.../IMG_9671.HEIC Then add the hardware (remember it all only goes on one way if you want it to work) https://hosting.photobucket.com/imag.../IMG_9672.HEIC The tool even shows you Operation 1 and then 2 to do the different sides. https://hosting.photobucket.com/imag.../IMG_9676.HEIC Of course if you overdo the pressure like me…… Oooopps. https://hosting.photobucket.com/imag.../IMG_9678.HEIC Cut off and start again, thankfully I had cut the pipe a bit longer than needed. Next job was to do a second brake hose mounting plate. Where do you buy something that is not for sale out there? Grab some plate, copy it, cut to shape with tin snips, drill holes, file nd tidy, fold tabs etc. https://hosting.photobucket.com/imag.../IMG_9673.HEIC https://hosting.photobucket.com/imag.../IMG_9679.HEIC Then time for a break, made some lunch, and then headed down to The local motor spares shop, got the 500mm brake hose identified, and ordered one for tomorrow. Followed by the industrial estate, bought some shoulder bolts to replace the ones I hd bought from Rally Design as the ones they sent were the wrong thread pitch. Followed by a visit to Aghabridge for some brake line fittings, some of which, along with the shoulder bolts, Nick will be trimming back on his lathe at home before we can fit them. Back at home we refitted the drivers side calliper and then the pads, plates, pins, springs and R-clips followed by brake pipes and hose. Pretty chuffed at this point. https://hosting.photobucket.com/imag.../IMG_9681.HEIC And once turned aside the refit went quick. https://hosting.photobucket.com/imag.../IMG_9682.HEIC One more coffee, a discussion about wheel adapters, wheel nuts, studs and lowering and then @Nickwheeler left for his next appointment which he can tell about. A great day, thanks to having help and brains on site. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Todays first job, after having had a lovely holiday breakfast of two fried eggs between slices of toast will be getting into the rear of the garage and removing one strip light I know is fitted to the rear wall.
Once I remove half the C10 parts and load bed stacked in there. Realised that it is pretty much dark by 5.00pm now and by Christmas it will be 3.30pm when play will be halted outside. So fitting the strip lights this morning before heading out to go collect the brake hose ordered yesterday is my plan. Remember when I had less clutter. These lights actually never ended up working. http://i294.photobucket.com/albums/m...ps96ef1262.jpg So hopefully by 11.00 the carport will have three strip lights up, if I can keep my shiit together and not get distracted Day 2 of vacation. . |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Loooong overdue job on the carport built last year done yesterday.
I removed strip lights from inside the garage and mounted them outside in the carport, all individually wired and plugged so that I can select which to run. I had smashed one pair of tubes before when I dropped a light, so headed to the local electrical wholesalers to get replacements, and while out there I got an LED spotlight, going for a 50W unit claimed to deliver 4500 lumens. Should be great for dark time work. https://hosting.photobucket.com/imag.../IMG_9732.HEIC https://hosting.photobucket.com/imag.../IMG_9733.HEIC Went to see how they worked after dark last night. I think they will do. https://hosting.photobucket.com/imag.../IMG_9747.HEIC https://hosting.photobucket.com/imag.../IMG_9746.HEIC https://hosting.photobucket.com/imag.../IMG_9743.HEIC May add one more to the front edge of the carport as well to improve coverage. Happy though. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
So while I fitted the lights, @nickwheeler carried on assembling the other side of the front end with the new hose and cut down bolt and nuts.
https://hosting.photobucket.com/imag.../IMG_9729.HEIC And finally…….. BOOOOMM !!!! SOOO PLEASED TO HAVE IT BACK HERE. https://hosting.photobucket.com/imag.../IMG_9737.HEIC Then we had a coffee and jam donuts to celebrate. Followed by a start up on the rear brakes as the slave cylinders ordered had been delivered in less than 24 hours. Unlike me, Nick does not have a foul sailors mouth, the air around his head was crystal clear once we started disassembly, whereas I was in a puff of blue smoke tinged with frustration. Even the disassembly was just not easy, though I am sure there could be an easy disassembly technique. Once removed…….. https://hosting.photobucket.com/imag.../IMG_9739.HEIC Trying the new ones I had bought off eBay it seemed they just did not want to fit, either on the backing or in the drums. https://hosting.photobucket.com/imag.../IMG_9740.HEIC At this point a reference to the service manuals Nick and dan had brought here before, showed that there are actually two sizes specified…….. 8” or 203mm for the lower spec 1300cc and 9” drums for the 1600, 2000 and 2300cc models. So as luck would have it, I had bought 9” brake shoes, and then the slave cylinders I ordered were wrong too, they have a round mounting on my brakes, but the ones I had ordered have a more oval shape, so do not fit. Guess I have a full set of new, unused parts for sale. Original part number, now need to find a pair. https://hosting.photobucket.com/imag.../IMG_9744.HEIC And the original slave has some almost illegible details. https://hosting.photobucket.com/imag.../IMG_9745.HEIC FRUSTRATED.Com Later, and after dark, the lights seem to be really good, I will add one more just inside the roof on the final beam. Seems shadows will also not be a big problem, maybe. I guess progress is progress, regardless. . |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Some random stuff.
On my daily walk, I have few touch points that end up giving me the 6.3km or almost 4mile walk I do. https://hosting.photobucket.com/imag...x/IMG_9768.PNG Alpaca corner. https://hosting.photobucket.com/imag.../IMG_9764.HEIC https://hosting.photobucket.com/imag.../IMG_9763.HEIC A new farmer has taken over the land lease from the Church, and he is ruthless, greedy and destroying infrastructure as he goes about maximising his profits. The tractors and trucks are ruining the road surfaces that were never made to be used at this scale. 300-450mm deep trenches along the edges as they collapse verges etc. I am not impressed. https://hosting.photobucket.com/imag.../IMG_9767.HEIC Lucky I guess its not my driveway. Waiting for the first cars to land in the trenches. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Not a road trip, but a 4hr trip on the road with a small detour to collect some fiberglass resin, matting, rollers etc from @adam73bgt that he collected for me a few months ago and stored in the back of his MG BGT.
Also stopped at Watford Gap Services for a pee and overpriced Costa Coffee along with the croissants Sally had made for us. Thank you mate for collecting and storage. Easy house to identify. https://hosting.photobucket.com/imag.../IMG_9809.HEIC Then back on the road…… Up to Sandford near Whitchurch in Shropshire to come help mate Craig and Lorraine get some yard work and heavy lifting done. They bought a converted barn house and a bit of paddock that needs a lot of work to get to where they want it. Awesome details, layout and features, including an AGA wood burning stove in the kitchen. https://hosting.photobucket.com/imag.../IMG_9867.HEIC He bought the old stables, enough for 4 horse and tack store and it is getting moved 100 meters to a new spot in the back field, joined later by a garage/workshop Also happening is a new access path through the back being built, purple line…. So petrol head stuff needs doing. Yellow graded access started yesterday, 20 tons of hardcore being delivered on Saturday, so loads of prep needs doing before then. https://hosting.photobucket.com/imag...Render(55).jpg So Sally and I are the extra muscle. Gas tank for heating and cooking had to be installed as the seller is redeveloping the old stables next door in the large paddocks into a new home, stables, riding school etc. So new tank installed https://hosting.photobucket.com/imag.../IMG_9813.HEIC The vintage Massey Fergusson you see working here is the result of COVID 19 when the owner operator lost his job and started his own business. Garden bed, shrubs etc removed. Wall later today. I brought some tools too to help cut back parts of the overgrown garden and access. https://hosting.photobucket.com/imag.../IMG_9826.HEIC https://hosting.photobucket.com/imag.../IMG_9836.HEIC https://hosting.photobucket.com/imag.../IMG_9839.HEIC https://hosting.photobucket.com/imag.../IMG_9842.HEIC Loads of hedges to cut back. https://hosting.photobucket.com/imag...58af19de96.jpg And lawns to cut. Everything is badly neglected and overgrown https://hosting.photobucket.com/imag...78fbc992e0.jpg There is a lot of lawn to cut, another Grizz-job as I do love a good looking lawn. Gas delivery done early this morning. https://hosting.photobucket.com/imag...ccb1001306.jpg Lawns starting to look good too. More today. And shed dismantling plus a glass greenhouse. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
This morning we started at 09.00 and moved about 4 ton bags of roof felt that was on the stables’ roof.
Then transferred and compacted further and into Hippo bags for removal. So I started on the lawn again once the other random jobs were done. Squared off the centre part as a plan was brewing. https://hosting.photobucket.com/imag.../IMG_9896.HEIC And in the mean time Larry had removed a pile of soil from where the new access path and driveway will be going. Next up would be the wall, followed by removing a few more hedge plants and large shrobs and trees. https://hosting.photobucket.com/imag.../IMG_9894.HEIC Eventually I got done with the lawn, the grass was so wet and thick from being overgrown, it took a load of clearing the machine nd basket. I think Lorraine is a bit miffed as it means she needs to do it this way next time. https://hosting.photobucket.com/imag.../IMG_9902.HEIC More work going on all day. |
All times are GMT -4. The time now is 02:07 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com