![]() |
Re: What did you do to your truck today!
Oh, but the curves you get to enjoy with that long and lean beauty!:smoke:
When I finish my 70CST I will start on a C-3 for the wifey. Curvy hottie driving a curvy hottie. :smoke::smoke: But, I do agree, there is something about those low maintenance corn-feed girls that like working hard and getting dirty!:smoke: |
Re: What did you do to your truck today!
1 Attachment(s)
I'm an Old Fart, don't see real well at night any more so, the Old Dim T3 yellow headlights are gone, replaced with New Projection Headlights. Upgraded wiring harness & relays of course too.
|
Re: What did you do to your truck today!
Some proof that I have been working on mine.
http://youtu.be/OTGCgPuDV-k |
Re: What did you do to your truck today!
2 Attachment(s)
I painted my door panels today. It was finally 70 degrees here today & no wind! Yippee ki yay!!
The before and after pics. IMO the black looks sooooo much better than that orange/red panel. The replacement arm rests will be here next week. I also replaced the window channel weather stripping (door glass felt run channel) and the fuzzies aka the scrappers or anti-rattle on the driver side door. Yahoo!! no more glass rattle when I shut the door. |
Re: What did you do to your truck today!
1 Attachment(s)
I worked on replacing the passenger side window regulator. The whole door is just about gutted. Once I get the new window regulator installed then the new window channel weather stripping (door glass felt run channel) and the fuzzies aka the scrappers or anti-rattle will be installed. Then both doors will be done. Next will be the sound deadener, jute, carpet, cab weather-stripping & new door sills - after I replace that dang leaking heater core!
|
Re: What did you do to your truck today!
Finally mounted the rims and started to test and tune...
http://i77.photobucket.com/albums/j7...ps7lgdlwvj.jpg http://i77.photobucket.com/albums/j7...g2j3fcix-1.jpg[/QUOTE] |
Re: What did you do to your truck today!
Ordered a new carb, heater core, and blower motor from summit. Then placed a call to Porterbuilt for my suspension. It's going to be a long 6 weeks.
|
Re: What did you do to your truck today!
Quote:
That looks great! what are the specs on the wheels?:metal: |
Re: What did you do to your truck today!
That looks great! what are the specs on the wheels?:metal:[/QUOTE]
X2 really like that look! Who's the mfr? |
Re: What did you do to your truck today!
1 Attachment(s)
I finished installing the passenger side window regulator, the new window channel weather stripping (door glass felt run channel) and the fuzzies aka the scrappers or anti-rattle are installed. The junk yard/new window regulator works great! The window doesn't fall down now when I shut the door. And I didn't even break the glass putting it back in, kudos to me! Now I'm just waiting for the new arm rests to come in.
|
Re: What did you do to your truck today!
Quote:
Circle Racing circleracing.com They are 20x10 rear and 20x8.5 fronts |
Re: What did you do to your truck today!
I tried (in vain) to see if I could get a fellow board member to part out his stepside bed so I could get his passenger side fender. Oh well, I ended up encouraging him to sell it all at once then prayed that he could.
It was cool talking with a fellow member and that made the call worthwhile. :metal: |
Re: What did you do to your truck today!
Quote:
|
Re: What did you do to your truck today!
Quote:
|
Re: What did you do to your truck today!
Put all new fuel lines and fuel pump...went for a cruise and wasted an hour drooling on a new tranny.......
|
Re: What did you do to your truck today!
Hey Texjake, It's snowing here and I have to work outside, so not doing it right now, But I have the window channels, (whole kit & trim everything you mentioned) and rubber Vent window gaskets also complete. Any insights, tricks to make it easier or just go for the obvious?
- Lee |
Re: What did you do to your truck today!
Quote:
|
Re: What did you do to your truck today!
today i installed the hei distributor, replaced the thermostat, and started on my 5 speed swap. i cut out the small hump and drilled holes for the high hump. i searched for a shifter, but to no luck. the shifter for the 90 nv3500 has been discontinued. so i made one myself, glad i did too because i paid a total of $0.64 for it. i had a long piece of rod laying in the garage i used.
|
Re: What did you do to your truck today!
Quote:
|
Re: What did you do to your truck today!
3 Attachment(s)
I'm having the 305 TPI motor swapped out for a 6.0 LSx motor.
Hawks 3rd gen Camaro is doing the work.;):chevy: |
Re: What did you do to your truck today!
try to find the issue with contact. i have battery, but no contact ..... and no electricity !!
|
Re: What did you do to your truck today!
Quote:
|
Re: What did you do to your truck today!
thanks. After control, it was just a little issue with battery clip.
now it works |
Re: What did you do to your truck today!
I called the owner of the body/shop today that has had my truck for like 8 years and told him to get working on it, I've done this every other month for years now. I also told him that I just may have to take his butt to court if he did not get it done, or give me all my money back that I have paid him in advance and I'll find another shop to finish it. Guy offered me a deal, which I have in writing on the labor rate for helping him out $ during a hard time he was having. Hardly a deal when its taking this long. Granted though I never did put in a date of completion, and the work he is doing is the very top on notches. Money always seems to make enemies out of friends. So I guess I did at least something for my truck today!! Ha. John
|
Re: What did you do to your truck today!
Quote:
|
Re: What did you do to your truck today!
That is extremely long on the truck, but sounds like things will start to happen now, to bad it has to be that hard.
|
Re: What did you do to your truck today!
I went over to Sears and picked up my Craftsman Double Flare Kit for when I replace my entire fuel (hard) lines.
|
Re: What did you do to your truck today!
Finally got the truck in the garage so I can begin work on it:metal:
|
Re: What did you do to your truck today!
|
Re: What did you do to your truck today!
1 Attachment(s)
Installed serpentine system, waiting on under drive pulleys to arrive today or tomorrow.
|
Re: What did you do to your truck today!
Maybe some of you can do some video's on the metal work you do on your trucks, so the rest of us novices might learn something... Nice work......
|
Re: What did you do to your truck today!
1 Attachment(s)
Blasted, Primed, Sprayed with 2 coats of 2k epoxy bedliner. Made good progress today.
|
Re: What did you do to your truck today!
Wow ;
So much hard works ! great to look at . especially the welding & body works . I'm back from the Hospital , the neck surgery seems to have gone well , now I wait until March before being allowed to pick up my tools again . |
Re: What did you do to your truck today!
Quote:
|
Re: What did you do to your truck today!
Quote:
|
Re: What did you do to your truck today!
THANK YOU ! :metal: .
Being a Mechanic is my life , all of it as my Son is grown & gone now so sitting still where they're a beat to crap CHEVROLET light duty pickup truck sitting in my back yard , is *very* difficult . I have no choice , gotta sit on my hands and read all the wonderful Truck Porn you alls post up daily :chevy: . I doubt I'll be able to drive my Saturday Jan. 4th . |
Re: What did you do to your truck today!
Quote:
Hang in there. Use your time to post the good sh@t you usually write that keeps us all happy...and now, up to date with your recovery. |
Re: What did you do to your truck today!
Quote:
Take your time to heal, in order to come back better than ever! I'm glad to hear everything went well with your surgery. Dano |
Re: What did you do to your truck today!
Took the ol truck and my little girl out this morning for breakfast. It is her 11th birthday and we have a tradition of going out for breakfast just the two of us. She still giggles when I punch the gas and the truck takes off. Good memories. Merry Christmas.
|
Re: What did you do to your truck today!
GOOD DADDY ! :metal: .
Keep this up and you'll reap huge dividends in another 20 years..... |
All times are GMT -4. The time now is 01:21 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com