Re: What did you do with your truck today, take 2
Quote:
|
Re: What did you do with your truck today, take 2
Will do Orrie
|
Re: What did you do with your truck today, take 2
1 Attachment(s)
|
Re: What did you do with your truck today, take 2
Quote:
We need the info...the 411, cuz that looks cool |
Re: What did you do with your truck today, take 2
Too cheap to buy em. 3/8 pipe nipple from blue box store, knobs from McMaster Carr, springs, all I need now are a couple grommets..
|
Re: What did you do with your truck today, take 2
3 Attachment(s)
Carpet trimed, edged and installed, need to do the piece over the hump and some minor fitting and trimming insulation, but I'm happy.
|
Re: What did you do with your truck today, take 2
Oil change and tune up. Then a 60 mile cruise.
|
Re: What did you do with your truck today, take 2
1 Attachment(s)
Rebuilt my steering gear. Keeo it on bench to see if it has leaks before mounting to frame next weekend.
|
Re: What did you do with your truck today, take 2
1 Attachment(s)
Carpet is done, made some matching floor matts.
|
Re: What did you do with your truck today, take 2
Looks great!
|
Re: What did you do with your truck today, take 2
Looking good OrrieG! Are you doing the edging yourself? Cheers, Jim
|
Re: What did you do with your truck today, take 2
welded in a section of the bed.
http://i388.photobucket.com/albums/o...pskdn8ufer.jpghttp://i388.photobucket.com/albums/o...psih7l2ohi.jpg |
Re: What did you do with your truck today, take 2
Quote:
https://www.youtube.com/watch?v=8kpa9LYX1DE |
Re: What did you do with your truck today, take 2
Just watched the video - well, I will be darned! Thanks.
|
Re: What did you do with your truck today, take 2
2 Attachment(s)
PS pump in and column connected to new steering box. Somehow I managed to mess up the upper steering shaft bearing in the process so had to order a replacement. If not for that I'd of been finished...
|
Re: What did you do with your truck today, take 2
Quote:
I'd like to know about all your details. I've installed one too but I don't have my truck on the road yet. |
Re: What did you do with your truck today, take 2
nah just here. For those interested in doing one of these conversions I can tell you that it's actually pretty easy to do if you follow the instructions that come with it. The only complaint I had was that they don't tell you that you will need to purchase a bearing for the lower part of the column if using the original setup or what size to get. As others have stated they do actually sell one at CPP but no mention of it anywhere.
Just delays the process while you wait to get one in. I think CPP sells the bearing kit for $60 but I bought a 3/4 X 1 5/8 bearing for about $4 at Ace Hardware. It's so tight that I had to ream the inside of the column and then pound it in so it's never coming back out. In addition, remove the upper bearing while doing all of this otherwise you'll ruin it like I did. |
Re: What did you do with your truck today, take 2
Quote:
Not sure when I'll get round to fitting it - do you need to have the flats machined on your column by a professional ? |
Re: What did you do with your truck today, take 2
|
Re: What did you do with your truck today, take 2
Quote:
|
Re: What did you do with your truck today, take 2
3 Attachment(s)
Our local McDonald's has a cruise-in the last thursday of the month. I went last night and enjoyed seeing old friends and cars. Here's a couple pics...Jim
|
Re: What did you do with your truck today, take 2
Love that Caddy!
|
Re: What did you do with your truck today, take 2
I am challenging everyone to help one of our own, SKYMANGS, The S10 Swap How To sticky thread author was severely injured in a fire at his shop. A detail of the events can be found here There is a GoFundMe page setup to help him and his family with expenses. Advance Design brilliantly incorporated the link http://gofundme.com/c49h5mjx8 into the signature, that way it automatically is posted on any thread you have replied on. Please help spread the word and link up your signature to "SKYMANGS" GoFund me link and let's help one of our own.
|
Re: What did you do with your truck today, take 2
Well I've been spending money like a drunk sailor on my 57, not much work on it so far. I hope to change that soon. I got a Heidt's MII front suspension for it this week, gotta get the old stuff off now.
I bought a fresh Gen VI BBC with alum heads and then decided I didn't like the rods that were in it, or the pistons, so I'm swapping them out for some beefier stuff, you can't go wrong with building a strong bottom end. It has the 502 Ramjet roller cam, .527 int, .544 exh, got some Comp Cams roller rocker arms for it and a Edelbrock Air Gap Performer intake and 830 Holley. I want full-floating wrist pins and the wire locks weren't with the pistons which has slowed me down a few days waiting on them but I hope to get it all together in a few more days. Then it will be ready to get started on the MII and swap the old rear diff out for a fresh 12 bolt out of a 69 Camaro. I think the UPS and FedEx guys have both got low back strains hauling all of this stuff to my office. |
Re: What did you do with your truck today, take 2
Quote:
|
All times are GMT -4. The time now is 10:35 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com