Re: 1966 SBBW pro street
Quote:
|
Re: 1966 SBBW pro street
Well good news......
The prostreet truck body work has begun again....no more mods, it's up on the hoist and back to filling in the trim holes...and prep for primer. Might take some pics on monday of the progress |
Re: 1966 SBBW pro street
is it safe....are the mopars gone:lol::lol:
|
Re: 1966 SBBW pro street
Quote:
long time no see....you have a new project yet? I have a couple i am working on while the prostreet truck gets some body work done..... |
Re: 1966 SBBW pro street
I have i few things cookin( a appliance joke) been thinking about a another big truck built or a lifted truck not sure yet .i have been working on my house a bit . but been driving my prostreeter and i love it!!
|
Re: 1966 SBBW pro street
Quote:
|
Re: 1966 SBBW pro street
Well so much for a mellow winter.....it snowed for a day. Woke up to find over a foot of snow.....was a adventure just getting to the shop door.
|
Re: 1966 SBBW pro street
I'd say sorry, but you guys can have all that white stuff! Maybe you should build a 4x4! :lol:
|
Re: 1966 SBBW pro street
Quote:
|
Re: 1966 SBBW pro street
A little late but I found this post on positioning a bumper. Quite ingenious and seems close to your issue. I didn't see your name on the post so here's the post, like I said a little late but maybe useful.
http://67-72chevytrucks.com/vboard/s...283107&page=17 |
Re: 1966 SBBW pro street
Quote:
|
Re: 1966 SBBW pro street
Quote:
Ya well we had a great non run snow season and then whamo.....there is way too much and now the temps dropped for a while so i am taking a shop break....lol....it's a trek just to get into my shop never mind heating it when it's that cold. So I think i will take this week off **lmao** |
Re: 1966 SBBW pro street
About time you guys got some winter down there!
Stay warm wutnxt, look forward to seeing your progress next week maybe? |
Re: 1966 SBBW pro street
It was -3*F this morning when I went out to start my truck. It wasn't real happy but it started. Maybe I may start to plug it in if it's going to be like this. :lol:
|
Re: 1966 SBBW pro street
Quote:
|
Re: 1966 SBBW pro street
That's without wind chill. I bet it's -20 with it since winds are a constant 15-20mph gusts. Besides, with all the hot air up there coming from you Canadians, it probably warms up real fast! :lol:
|
Re: 1966 SBBW pro street
Quote:
|
Re: 1966 SBBW pro street
Quote:
|
Re: 1966 SBBW pro street
Quote:
|
Re: 1966 SBBW pro street
Quote:
Friends made a video of it and put on their FB... funny stuff (kinda) |
Re: 1966 SBBW pro street
Quote:
|
Re: 1966 SBBW pro street
Quote:
|
Re: 1966 SBBW pro street
Quote:
|
Re: 1966 SBBW pro street
Well i have had a great run and making progress on everything ....including some new shelves in the shop.....
Pro street Finished the rough in for the bumper ...dealing with a few issues making some air bag adjustments and trying to figure out where to mount all of the air ride stuff...I am really running out of space on that thing...Took the last measurements to drop the front fenders.....jury is still out on inner fenders so far 65 SBBW Well dropped the stainless tank....drilled the hole for the fuel line to run and worked on the fuel pump brackets. Been polishing all of the bits and pieces because they are badly oxidized and that is really eating up some time....Dug the cab out and ordered all the pieces for the floor and new rockers..Dug out the new door I have and am considering ordering a new door for the other side. Still lost for color for that truck...groan...I haven't been inspired by anything i have seen so far..... 47 Big window Worked on the stainless tank and brackets to hold up the tank...tried to figure out where to put the fuel fittings and sending unit placement.....and how much more bracing to put in the box of the floor.Think we figured out where to mount the pump and run the fuel lines...Big issue with where to put the exhaust, there is even less room under that thing then my pro street truck. Big push on this truck trying to get all the fab work done so we can head to the paint phase. 66 long box Found the keys and put a battery on the charger....made a small list of parts to pick up. Will have it running and moving soon....thinking about painting it and maybe some new wheels for it . Firetruck Well we got it to run but now come the brakes....there aren't any. Bad news because it's infront of the 66 long box and i can't do much on the 66 till we figure out how to move the fire truck. We tried to tow it with 2 4x4's before and not so much the thing is really heavy and we had to grab my buddies gravel truck to move it last time. 58 SBBW Drove past in the driveway and cringes as it sits out in the rain.... 69 Z/28... Been searching and searching for a screaming deal on a Hedits front clip and a TKO 500 or 600...kit to drop in behind the 302 being built as we speak. It's not a for sure but i think i want to run a 69 302 with aluminum heads and a original intake thats powder coated. Then i want that dropped into a updated clip with a rack and tubular a arms and drop spindels backed up with TKO 5 speed.Leave the outside original with the cowl hood and ralley wheels on it....but so far no clip and TKO for cheap. It snowed for a few days and we ended up wih about 16" of snow then it warmed up and has been raining for a week.Being outside or trying to do anything outside is not good. |
Re: 1966 SBBW pro street
Great build... the front fender mod is only one of a several improvement you've made that are real cool..
|
All times are GMT -4. The time now is 10:34 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com