Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Frizzle, I like how the rear discs are coming together. I just bought my calipers and pads off eBay and I'm watching some rebuild kits. Those rotors oughta appear tiny behind those 22s!
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Got some more goodies on the way... Time to break out the 4" holesaw :)
http://static.summitracing.com/globa...-h8013-1_w.jpg ...and http://static.summitracing.com/globa...lo-15937_w.jpg |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Friz,
Who's headers are those? They look very nice. :c2: Are you running a LS series engine? |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Nice! Who makes the kit and is it SS or alum coated?
Kevin LFD inc. |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
Quote:
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Those Flowmaster pipe kits are nice. They will, however, leave you wanting an extra set of 45* bends since they are designed for longtubes...
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
All the rear brake parts are ready to go. I have have all new bearings front and rear ready to go in. Pads will be here Monday and the ebrake cables sometime this week.
http://i6.photobucket.com/albums/y23...g?t=1197840401 http://i6.photobucket.com/albums/y23...g?t=1197840401 http://i6.photobucket.com/albums/y23...g?t=1197840401 But there's always some kind of set-back... One of my calipers was sent with the wrong bracket. First two show the incorrect bracket (Corvette) and the third is the Camaro bracket: http://i6.photobucket.com/albums/y23...g?t=1197840401 http://i6.photobucket.com/albums/y23...g?t=1197840401 http://i6.photobucket.com/albums/y23...g?t=1197840401 |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
This board creates such a conundrum. I find one thread that helps me get stuff done faster and more efficient and then I find another that makes me want to take 3 steps backwards........ must have more willpower must have more willpower must have more willpower must have more willpower must have more willpower must have more willpower must have more willpower :devil::devil::devil: :metal::metal::metal: |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
OK, I've got some more questions on your brakes.
Am I reading correctly that the rear brakes are from a camaro? What year range and what is required to make them work - besides the brackets? Anything? Do they need to be modified to fit a truck 12bolt? Are you running the 5x4.75 bolt pattern or are you staying with the 5x5? I'm going to be running C4 stuff on the front of mine and am trying to figure out what to use to get the same pattern on the rear. Where do "Glock's" brackets come from? I'm familiar with the firearm but not brake brackets. Sorry for all the questions but this sounds like a good way to go and I have easy access to camaro parts. |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Glock is the board member that makes the brackets.
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
I was wondering if that's who that was.
I'm guessing there is a thread on the brakes somewhere? I'll look around for it. Thanks |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
OK, I found the thread but no more brackets.....:whine:
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
I think he's planning to make another run of them. He also makes brackets to run caprice/impala calipers. I went with the camaro's to retain a functional e-brake.
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
Quote:
Now you guys give this board way too much credit! I have been cutting vehicals for years! This board just gives us someone to share it with:lol: First victam 63 VW bug age 14;) and it has gotten worse with every killing since. Every now and then you save one and it makes it all worth it! Because then you can cut it again!!! Kevin LFD Inc. |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
This is going to be a very nice ride!
:four:This board is great:wave: |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
I pm'd him so I'm on the new waiting list. Thanks |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Hey Kevin I started out with a 67 Bug. Rolled it before I even had my license... :crazy:
I was asked about a parts list for my rear discs. Here it is:
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Mocked up the rear brakes with the calipers swapped side/side and facing forward instead of toward the rear. I think I'll run them this way. Just looks better IMO and may have minuscule performance advantage over hanging them off the rear of the axle. after the pics I pulled it apart and POR-15'd the axle tubes:
http://i6.photobucket.com/albums/y23...g?t=1198042101 http://i6.photobucket.com/albums/y23...g?t=1198042538 See, that's the way they should go. Front calipers toward rear and rear calipers toward front;): http://www.z06-corvette.com/events/2...to-Show-04.jpg |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Looks good! I also agree about running the calipers towards the front.
I can't wait for my calipers to show up. |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
FYI, some calipers are built to go a certain way to maintain proper pad wear. I know that front calipers on my 914 have the pistons notched so that the pads sit slightly angled.
-Britain |
All times are GMT -4. The time now is 10:27 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com