Re: Hazel the older Sister....
 

x2 dont keep a 67 man down you know how it is

Re: Hazel the older Sister....
 

i got mine at sixrobblees.com

Re: Hazel the older Sister....
 

is it done yet?

Re: Hazel the older Sister....
 

Nope, it's on hold again.........going to try and get the 71 stepside together before the end of next month......more than likely that will not happen as well.;)

Re: Hazel the older Sister....
 

Whats the plans for the stepside

Re: Hazel the older Sister....
 

Porterbuilt's new mild drop front and tubular rear with 20/22's Coys.

Re: Hazel the older Sister....
 

Ya know, it really makes me sad that Porterbuilt wasn't around back when I had money to spend on these kinds of things :lol:

Can't wait to see the stepside, I know it will look killer!

Re: Hazel the older Sister....
 

He's still around! Start planning now.....

Re: Hazel the older Sister....
 

Wow. 2 projects full of Porterbuilt parts. Can't wait to see both of them finished.

Re: Hazel the older Sister....
 

Actually, he has a square body that's got PB F/R set-up as well....

Re: Hazel the older Sister....
 

and that is where I start having the problem with the "thou shalt not covet" commandment :chevy:

Re: Hazel the older Sister....
 

Aint right i tell you just aint right !!!!

Re: Hazel the older Sister....
 

why does he always find the colest trucks :sumo::waah::lol:

Re: Hazel the older Sister....
 

He's not the only one that finds them.... just the 1st to the bank! :lol:

Re: Hazel the older Sister....
 

:haha::haha:

Re: Hazel the older Sister....
 

is there a thread

Re: Hazel the older Sister....
 

Some pics floating around from several years ago but there's no build thread.

Re: Hazel the older Sister....
 

I love that truck, awesome colors, good options, great patina, great stance, and a builder with amazing attention to detail. What you did to that door is art. Did you just hammer and dolly it? What are your plans for the bed floor? Are you going to cut it?

Re: Hazel the older Sister....
 

Thank you very much..I've been working very slowly these last few months due to my work schedule but I have done a few things. I cut up a new Wilwood master cylinder and slicked-painted it, got the carpet installed, made all the A/C lines (found out that I made the opening above the inner fender 1/4 to small for the fitting, so the last hose end gets installed on the truck with the fender on.) I started making a box that goes behind the engine and sits on top of the tranny for the PCV and breather (closed valve covers so I need the ventilation) I will paint all this black so it will help hide it. I bought a four post lift this week so next on the list is to start making all the brake and fuel lines and start on the exhaust (been putting off grinding the manifolds but it needs to get done) I also bought all the fittings so I can make the heater hoses in hard line inside the truck so I can run them outside through the modified heater box I made (almost a year ago) The "dream" is to have it on the ground with the Porterbuilt rear kit installed, front sheet metal installed (for the last time) sitting on it's new wheels and tires before 2011........then again it just a dream.

Re: Hazel the older Sister....
 

Keith,

That's what I was talking about on the VC 'tubes'. I was going to try & get them higher on the VC corner to keep liquids as far away as possible & hopefully help limit warpage when welding. Did it want to warp w/them centered?

You need a pic of an 'as is' Wilwood MC so people can see how yours has been massaged.

Re: Hazel the older Sister....
 

The tubes going into the VC I built a baffle into them to limit the oil from getting into the air box. As far as them wanting to warp, my tubes are all the way to lip of the covers and only spotted at the moment. I ran the temp as low as I could on the tig and kept cooling them off with a wet rag.

Re: Hazel the older Sister....
 

I need to swing by & check them out.

Re: Hazel the older Sister....
 

Awesome work n2billet!

Re: Hazel the older Sister....
 

Looking good! That master cylinder looks sweet!

Re: Hazel the older Sister....
 

Looks very nice,... like always.