Re: 68 aka "Chained in Porterbuilt Prison"
 

Thanks, looks great! Have you thought about making a couple of dimples in your dash for defrost vents?

Re: 68 aka "Chained in Porterbuilt Prison"
 

A little progress on 1 piece windows.....In my opinion they are about as good as u get for a full glass in a oddball door..that said let me give a few pointers...study the videos on U-tube....Ben gives some updates and changes that are not in hand manual...as far as those of u asking about "loose" in mid stroke...answer is yes...but its a shortfall worth it for the look....just wouldn't roll down the road with window half way down...it doesn't have front or rear channels so it needs to be all up or all down...its has a front guide down low and that will get the window where it needs to be when going up....got lucky and with slight mods the bear claw latch will work...glass crosses at angle near top of latch...however scratch my head on still being able to use Ring Brothers latches and make a mechanical linkage...glass is 3/4" from end of door..so trying to snake behind will be a pain........thinkin and drawin as we speak.........

Try this one (forgot to tell yall..I deal with electronics daily with railroad!!)......Push in on ring bros. handle....mechanically moves micro sw....which fires heavy duty door poppers on bear claw..door opens...outside door key moves another micro sw...which cuts power to 1st sw....button push in but no fire...locked out.....turn key to unlock position...power restored..button works
Inside door have mechanical door pull overriding popper and mechanically releases bear claw.......Old school on the outside....new school under the skins..... Thoughts??? ......jim

Re: 68 aka "Chained in Porterbuilt Prison"
 

:new:
Do you have any newer pictures of the truck or any of the smaller projects? Thanks......

Re: 68 aka "Chained in Porterbuilt Prison"
 

Yes ....pics please !
Posted via Mobile Device

Re: 68 aka "Chained in Porterbuilt Prison"
 

Cool idea for the door locks, I would just make sure the parts you use are either highly reliable, or easily attainable/replaceable...
Posted via Mobile Device

Re: 68 aka "Chained in Porterbuilt Prison"
 

Ok i'm back....swapmeets and honey do's ......just got one-piece -window in drivers side and finally got good news that the bearclaw works were i welded it in "without" any mods..looks like lock will unlatch with mechanical linkage from new ring brothers handles....due here any day.....got new door cylinders from GMC Pauls coming ...will mod with mechanical linkage for lock...So I welded up passenger door bearclaw bracket and that "pain-in-azz" curly bar for trim break....Thank God for rolocs discs!!......more this week.....jim

Re: 68 aka "Chained in Porterbuilt Prison"
 

good to see you back!

Re: 68 aka "Chained in Porterbuilt Prison"
 

Good to see your progress on the one piece window install, looks great. I also was wondering about bear claws but was concerned about fitment.

By the way I really liked your idea on the switches....
Posted via Mobile Device

Re: 68 aka "Chained in Porterbuilt Prison"
 

Nice !
Posted via Mobile Device

Re: 68 aka "Chained in Porterbuilt Prison"
 

The claws were thin enough to clear window edge..and linkage from handles "should" work mechanically...but switches and solonoids will work if it becomes a pain...If i stay with inside door lock knobs the action will be reversed...up will be locked...down unlocked...just a straight bar sliding up and down inside claw...may be able to use a "u shaped" arm under bar to reverse action back to normal...will see when all parts arrive...by the way when u see and here how these doors close with the claws....."big smile!!"....jim

Re: 68 aka "Chained in Porterbuilt Prison"
 

Really Nice! It's about time you get back to work! It probably took you 20 minutes just to find your thread to update it. :lol: When you get time, fill me in on the must do's or don't do's with the one piece windows. I'm not looking forward to that one.

Keep the updates rollin!

Re: 68 aka "Chained in Porterbuilt Prison"
 

Killer work, looks great.

Re: 68 aka "Chained in Porterbuilt Prison"
 

Lookin' good!

Re: 68 aka "Chained in Porterbuilt Prison"
 

Here's the deal...love the look..they are fast acting with the power kit...when the scrapers are installed they look like they will be firmly lined up to stay in the channels...only thing i don't like is where the roll inward of the door edge next to old vent window is..that "pooch" is tight against their bracket that holds glass...when scraper is installed it will act like a "wedge" between glass bracket and that pooch...He says something about this in video #8 or 9....my solution I think will be to trim the "pooch" past the bracket and that will allow scraper not to have to "kink" slightly around that factory pooch...He doesn't show a good shot of that finished look at the point I'm talking about...I know I'm anal about some things but I don't want that scraper trying to push up at front..He uses "gorilla snot" on the that area to hold scraper...I'll see if I can get a pic this evening of what I'm talking about...jim

Re: 68 aka "Chained in Porterbuilt Prison"
 

Here's the pic of window and door pooch I'm concerned with....and then work on door jamb....start to finish 1 hr......made easy with cab cuts from a forum vendor....then before and after.....

Re: 68 aka "Chained in Porterbuilt Prison"
 

And last 2...before and after finishing pie cut.....will finish tomorrow..Anybody know what that damn round indention was for??..jim

Re: 68 aka "Chained in Porterbuilt Prison"
 

to give you something to practice your welding on...........;)

They were thinking WAY ahead.

Re: 68 aka "Chained in Porterbuilt Prison"
 

Looks good Jim, I see you what you mean about the pooch. WHich do you think will be the issue, the inner or outer or both? I need to watch those videos. Do you think this setup is better than the other that has the little triangle in the front corner? Who's power lift setup are you using?

Re: 68 aka "Chained in Porterbuilt Prison"
 

My 72 had the idention with a screw through it and a coiled spring mounted on the back side, unsure what it held but i put a washer in it and welded it up to smooth the area out.

Re: 68 aka "Chained in Porterbuilt Prison"
 

Just that outside pooch in pic.....look close and u can see some black urethane between it and glass...thats the bracket....over all I like this setup..not perfect....but as close I think U can get for such a large glass....I never like the triangle...all of the pieces of this kit are of real good quality..rubbers ...channels ...all nice pieces.....just can't see exactly the final movement because of mock up only now....so we will see how pass. side does....and then get claws operating......jim

Re: 68 aka "Chained in Porterbuilt Prison"
 

well I'm back again.....another swapmeet coming with changes....business always gets in the way!!....lol....these pics aren't for the faint of heart....1st is of how door looks before welding old handle mounts up...R.B. handles are cut flat faced so did not look good on curve of door where old handles were SO....had to move done 1 1/2 inch...actually looks better to me ...in a couple of days I'll let ya'll decide....cut out handle "cup" and holes to an easy-to-weld rectangle.....last two pics are what it takes to make all 3 lock positions work with bear claws and 1 piece windows....That's locking with key-inside rod-and power actuator....all welded to bear claw for 1 assembly .....biggest pain so far.....and no I will not market these!!.....what a pain in azz...lol....also notice at top of bear claw....that is extra lever bracket added for opening from outside handle..Glad I took geometry in school...getting the proper lever action was the most time consuming...............jim

Re: 68 aka "Chained in Porterbuilt Prison"
 

the indention held a spring lever on the inside of the cab that held the jack tools for changing the tires

Re: 68 aka "Chained in Porterbuilt Prison"
 

thanx...this cab had no hole just indention..was wondering.........

Re: 68 aka "Chained in Porterbuilt Prison"
 

Super nice work ! Thanks for the word on the one piece door glass. :chevy:

Re: 68 aka "Chained in Porterbuilt Prison"
 

Wow