The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   All 4x4 Tech & Off Roading (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=30)
-   -   post your 67-72 4x4 (https://67-72chevytrucks.com/vboard/showthread.php?t=365260)

68 GMC step long 04-16-2013 10:10 PM

Re: post your 67-72 4x4
 
1 Attachment(s)
72 GMC Jimmy. 496 big block, pro comp aluminum heads, edelbrock air gap intake. 4:10 gears, Detroit locker. 315-75-16 cooper at3 tires.
Posted via Mobile Device
Posted via Mobile Device

71veronica 04-18-2013 07:31 PM

Re: post your 67-72 4x4
 
2 Attachment(s)
heres mine so far

SCHRUMGMC 04-18-2013 07:32 PM

Re: post your 67-72 4x4
 
Looking great

RatRod68 04-19-2013 06:55 AM

Re: post your 67-72 4x4
 
Quote:

Originally Posted by 71veronica (Post 6020427)
heres mine so far

Looks just like the truck my pops just finished painting. Looks great!

Yerboogieman 04-21-2013 03:07 PM

Re: post your 67-72 4x4
 
You guys make my Suburban look tiny lol

Anyways, it's got Detroit Lockers, NP205, 350/350, with the regular engine mods (Edelbrock, etc, etc), and some Doug Thorley long tubes. Soon to get some 3/4 ton leaf springs up front and some blocks in the back to even it out, and hopefully some new tires.

https://sphotos-a.xx.fbcdn.net/hphot...31902273_o.jpg

https://sphotos-b.xx.fbcdn.net/hphot...89482281_o.jpg

https://sphotos-a.xx.fbcdn.net/hphot...95468698_o.jpg

silvertip67 05-18-2013 05:34 PM

finally a paint job! 1967 K-20 CST
 
after a few years of trying to get it together I finally painted my truck...I settled on a single stage urethane w/ hardener...original color...nice paint...Nason by DuPont ...

used my 30 gallon compressor and a water filter...45 pounds pressure...solid two coats with thgree on the hood, roof and doors...hit the inside bed too a little...still have a 1/4 gallon left over...I painted the roof green...( it was white and the body green) if I dont like it I will re spray it white???

this morning I did the jambs, hood sides and hit a spot or two I missed under one quarter...all with a small foam roller...worked like a charm...minimal tape necessary...

May is good weather...no bugs(well a few) nice temps and no humidity yet...this is something I did 40 years ago ...and decided to do it again for oldd time sake...also saved a bundle...275 dollars in paint, hardner and some reducer and tape...

it was fun...started at 8 in themorning after wet sanding w/ 400 the night before...only a few runs, nothing a little 600 and some wax wont fix...I do need to get the letter decals for the tailgate...also I lost one of the cab light bezels on the first test ride...I must have un hooked it when I pulled the tape of...that will probbably be harder to fix than anything else...

...and I think its running a bit better too...LOL...

1967 K-20 CST 4 wd 327 ci 4 speed...

all the best...ted

http://i637.photobucket.com/albums/u...ps75cf0ab8.jpg

three rools of tape later...boy is tape $$ now...

http://i637.photobucket.com/albums/u...psd699c921.jpg

the letters cleaned up nice...

http://i637.photobucket.com/albums/u...psfe9aaee2.jpg

almost ready...

http://i637.photobucket.com/albums/u...ps5dd4adfe.jpg

nitrosport_5 05-18-2013 05:44 PM

Re: post your 67-72 4x4
 
beautiful truck ted. love the color.
Posted via Mobile Device

jjzepplin 05-18-2013 06:15 PM

Re: post your 67-72 4x4
 
WOW! Can you come on down to Florida and paint mine? JK. That is real nice. And that color is growing on me more every time I see it. Kinda wish my truck were older now. Congrats sir. So many never make it to paint...

71veronica 05-20-2013 11:56 AM

Re: post your 67-72 4x4
 
2 Attachment(s)
update i finally get to pick her up this weekend then the real fun beings putting it all back together:gmc2:

Murphy IRE 05-24-2013 04:52 PM

Re: post your 67-72 4x4
 
Silvertip67, looks great. I finally dropped mine at the painter. I don't have the shop, tools or skill. I did strip her done to bare metal. She is going back to the 504 and 502 two tone (Lt Olive green and white). Trim is done. I have to finish the tail gate trim and repaint the front grill. It was silver and the PO bainted it black. I found one decent 69 door and a marginal 71 door (passenger side). Mine were dead. I think I will run out of $$$ and I will do the bed liner myself.
71 veronica, looking good send pics when done!
I'll do the same

Wildstreak 06-23-2013 01:50 AM

Re: post your 67-72 4x4
 
2 Attachment(s)
so after almost 4 years after starting this thread Ive made some progress of the LWB, hopefully in the next few weeks I can get it primed one uniform color lol.

jjzepplin 06-23-2013 06:24 AM

Re: post your 67-72 4x4
 
Finally SOME progress? Looks like a ton of progress! Good job! Oh and a side question... Do you really own all those trucks in your sig? DANG! PM me some pics of that 57. Those are like truck porn to me.

mud.man.rj 06-23-2013 12:12 PM

Re: post your 67-72 4x4
 
If he does own that many trucks it is no wonder he has no time to work on all of them, man one is hard enough.

Wildstreak 06-23-2013 01:05 PM

Re: post your 67-72 4x4
 
2 Attachment(s)
Theres actually a few more Im hiding as well, my sig would be too long with them all in there. The 57 is in the same state the 70 was for the last 4 years but longer. Its my next project i think, looking for a 454 locally then find a nv4500 and np205 to stuff in it. I have like three tri fives trucks and one 58 apache as well as what I think is a two ton 55-57 GMC, you cant see the frame or rear end but they are massive. And right after I took this pic I grabbed the weed eater and cleaned around the truck so the grass doesnt grow into it. Yes I feel bad for it being outside but Im building a lean too this summer for most of my vehicles.

jjzepplin 06-23-2013 02:11 PM

Re: post your 67-72 4x4
 
So freakin jealous! Maybe you should send me the 57 postage paid so I could finish that which has been started...

jjzepplin 06-23-2013 02:16 PM

Re: post your 67-72 4x4
 
Quote:

Originally Posted by 71veronica (Post 6080893)
update i finally get to pick her up this weekend then the real fun beings putting it all back together:gmc2:

That's a nice piece of steel you have there V. Any progress?

mud.man.rj 06-23-2013 06:02 PM

Re: post your 67-72 4x4
 
Looks like you will need an extra large lean too for all your projects, hope your fairly young.:lol:

Wildstreak 06-23-2013 07:36 PM

Re: post your 67-72 4x4
 
30 so young enough to collect more and finish the rest lol, If I can start finishing them once a year Ill be done by 40 lol. I live in a small town where most spend their time drinking beer and doing nothing, while I dont mind beer, Id rather spend my hard earned cash on my truck/cars/toys. Once a few are restored I can sell one or two to fund others. I hope to build two lean too`s, one will be a 4 car the other maybe 6. But thats all hopes right now lol.

mud.man.rj 06-23-2013 09:00 PM

Re: post your 67-72 4x4
 
Well young enough and with a good plan too, some cool stuff for builds. I only do one at a time, your probably thinking of a few at a time and collecting parts for most, kind of an advantage for you.:thumbs:

ColoradoK5 06-24-2013 02:57 PM

Re: post your 67-72 4x4
 
1 Attachment(s)
My 71 K5 after 5 years its back on the road!!

WETOWM 06-24-2013 07:09 PM

Re: post your 67-72 4x4
 
Well here it is all finished ! I took it to my first show this weekend a super chevy show took 1st in my class and best stock restored .

WETOWM 06-24-2013 07:13 PM

Re: post your 67-72 4x4
 
5 Attachment(s)
Pictures

sboris 06-28-2013 10:57 AM

Re: post your 67-72 4x4
 
^^^^^. Sweet truck wetowm. Kansas speedway I assume? And congrats on the wins. It's nice to be recognized after a lot of hard work..
Posted via Mobile Device

WETOWM 06-29-2013 09:03 AM

Re: post your 67-72 4x4
 
Thanks this was at gateway raceway st louis i need to post some better pics

waybad 06-30-2013 09:28 PM

Re: post your 67-72 4x4
 
love these trucks

docstheman 07-03-2013 03:54 PM

Re: post your 67-72 4x4
 
2 Attachment(s)
Just recently picked this one up. Check out my build thread for progress. I need all the help I can get.

fattyarbuckle 07-03-2013 04:01 PM

Re: post your 67-72 4x4
 
did you get it wet?
We were there and were almost drowned while trying to get to our car! Pretty good rain for a while and traffic getting home was bad.

Nice looking truck!


Quote:

Originally Posted by WETOWM (Post 6140654)
Pictures


mud.man.rj 07-03-2013 10:04 PM

Re: post your 67-72 4x4
 
Wow Doc that truck looks so abused, bring it back to life again, save her.:thumbs:

69 4by 07-23-2013 12:29 AM

Re: post your 67-72 4x4
 
Hi guys new guy here. Been looking here a while and finaly signed up.

Burt4x4 07-30-2013 03:03 PM

Re: post your 67-72 4x4
 
Quote:

Originally Posted by ColoradoK5 (Post 6140217)
My 71 K5 after 5 years its back on the road!!

Wasssup StevO

K5 looks perrty damn clean bro..not sure about your CitySlicker wheels :uhmk:

Hey if you dig it then all good egh!!

Later
Burt

RatRod68 07-31-2013 09:51 PM

Re: post your 67-72 4x4
 
Quote:

Originally Posted by WETOWM (Post 6140654)
Pictures

DAYUM O.O

Love that truck

ColoradoK5 08-01-2013 11:30 AM

Re: post your 67-72 4x4
 
Quote:

Originally Posted by Burt4x4 (Post 6196868)
Wasssup StevO

K5 looks perrty damn clean bro..not sure about your CitySlicker wheels :uhmk:

Hey if you dig it then all good egh!!

Later
Burt

Thanks, Burt I dig em My blazer dont get offroad much but it does even with the old rallys to much $$ to mess up the paint and body on this one

71veronica 08-28-2013 10:55 PM

Re: finally a paint job! 1967 K-20 CST
 
Quote:

Originally Posted by silvertip67 (Post 6078033)
after a few years of trying to get it together I finally painted my truck...I settled on a single stage urethane w/ hardener...original color...nice paint...Nason by DuPont ...

used my 30 gallon compressor and a water filter...45 pounds pressure...solid two coats with thgree on the hood, roof and doors...hit the inside bed too a little...still have a 1/4 gallon left over...I painted the roof green...( it was white and the body green) if I dont like it I will re spray it white???

this morning I did the jambs, hood sides and hit a spot or two I missed under one quarter...all with a small foam roller...worked like a charm...minimal tape necessary...

May is good weather...no bugs(well a few) nice temps and no humidity yet...this is something I did 40 years ago ...and decided to do it again for oldd time sake...also saved a bundle...275 dollars in paint, hardner and some reducer and tape...

it was fun...started at 8 in themorning after wet sanding w/ 400 the night before...only a few runs, nothing a little 600 and some wax wont fix...I do need to get the letter decals for the tailgate...also I lost one of the cab light bezels on the first test ride...I must have un hooked it when I pulled the tape of...that will probbably be harder to fix than anything else...

...and I think its running a bit better too...LOL...

1967 K-20 CST 4 wd 327 ci 4 speed...

all the best...ted

http://i637.photobucket.com/albums/u...ps75cf0ab8.jpg

three rools of tape later...boy is tape $$ now...

http://i637.photobucket.com/albums/u...psd699c921.jpg

the letters cleaned up nice...

http://i637.photobucket.com/albums/u...psfe9aaee2.jpg

almost ready...

http://i637.photobucket.com/albums/u...ps5dd4adfe.jpg

Awesome truck you got there i would give my arm and leg for it.:metal:

fp1967 08-31-2013 11:35 PM

Re: post your 67-72 4x4
 
Here is one that I've had since 1987. The first pic was taken in 1996, the second pic was taken last summer.

http://i1217.photobucket.com/albums/...rayTruck01.jpg

http://i1217.photobucket.com/albums/...rayTruck02.jpg

mud.man.rj 09-01-2013 02:29 AM

Re: post your 67-72 4x4
 
Truck looks so much clean without the Duke's of Hazzard turbines, the factory Ralleys look much better.

nbrfd007 09-01-2013 08:42 PM

Re: finally a paint job! 1967 K-20 CST
 
Quote:

Originally Posted by 71veronica (Post 6243469)
Awesome truck you got there i would give my arm and leg for it.:metal:

Looks Great!!

70cst10_05 09-02-2013 09:59 PM

Re: post your 67-72 4x4
 
1 Attachment(s)
Here's mine, not sure if I've ever posted a pic here or not. Still needs some work.

ETsC10 09-08-2013 02:54 PM

Re: finally a paint job! 1967 K-20 CST
 
Quote:

Originally Posted by silvertip67 (Post 6078033)
after a few years of trying to get it together I finally painted my truck...I settled on a single stage urethane w/ hardener...original color...nice paint...Nason by DuPont ...

used my 30 gallon compressor and a water filter...45 pounds pressure...solid two coats with thgree on the hood, roof and doors...hit the inside bed too a little...still have a 1/4 gallon left over...I painted the roof green...( it was white and the body green) if I dont like it I will re spray it white???

this morning I did the jambs, hood sides and hit a spot or two I missed under one quarter...all with a small foam roller...worked like a charm...minimal tape necessary...

May is good weather...no bugs(well a few) nice temps and no humidity yet...this is something I did 40 years ago ...and decided to do it again for oldd time sake...also saved a bundle...275 dollars in paint, hardner and some reducer and tape...

it was fun...started at 8 in themorning after wet sanding w/ 400 the night before...only a few runs, nothing a little 600 and some wax wont fix...I do need to get the letter decals for the tailgate...also I lost one of the cab light bezels on the first test ride...I must have un hooked it when I pulled the tape of...that will probbably be harder to fix than anything else...

...and I think its running a bit better too...LOL...

1967 K-20 CST 4 wd 327 ci 4 speed...

all the best...ted

http://i637.photobucket.com/albums/u...ps75cf0ab8.jpg

three rools of tape later...boy is tape $$ now...

http://i637.photobucket.com/albums/u...psd699c921.jpg

the letters cleaned up nice...

http://i637.photobucket.com/albums/u...psfe9aaee2.jpg

almost ready...

http://i637.photobucket.com/albums/u...ps5dd4adfe.jpg

Wow! Thanks for the inspiration! Looks great!

Twisted78SS 09-23-2013 05:44 PM

Re: post your 67-72 4x4
 
Just got this little gem, build thread to come at some point
67 4x4 SWB (yeah I know she's got a step side on her now, but i kinda like it that way)

It was originally a park service truck with a six cylinder, speed warning and radio delete. But once taken out of service she sat for quite some time.

Will be a mild build, driver.. Plan is to have her up and running before the weather really changes..
Some stuff already done, but lots to do. I will turn her back into a proper 67 with parts I already have including a set of 67 step side fenders. Since I already have a 2wd 68 SWB in the making, she will most likely remain a stepper.
Will start with a mild 350 and use the current SM 420/T221 and closed knuckle Dana 44 to get things going.

http://farm3.staticflickr.com/2882/9...4edc767e_z.jpg
http://farm3.staticflickr.com/2850/9...2b0f0120_z.jpg
http://farm8.staticflickr.com/7348/9...9e725b28_z.jpg
http://farm4.staticflickr.com/3763/9...8705e21f_z.jpg

What do you all think?

mud.man.rj 09-23-2013 09:49 PM

Re: post your 67-72 4x4
 
That 67 K10 stepper is a nice project, kind of like it a stepper and 4x4, of course the standard trans makes it a bit better yet.


All times are GMT -4. The time now is 09:41 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com