The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   What did you do to your truck today? (https://67-72chevytrucks.com/vboard/showthread.php?t=368988)

CRGRS 66 06-03-2012 11:47 PM

Re: What did you do to your truck today?
 
5 Attachment(s)
Finally finished the process of painting the wheels that I bought. The wheels are from a late 70's early 80's 4x4, they were originally white, and had center caps only (mine didn't have them when I got them mind you). I had a 71 Cuda with factory rally wheels a long time ago. They were a similar design to these, except the center section was inverse. I think the similarity in design
is what attracted me to these wheels.

First I had a buddy machine the center hole in each rim out to 3.625. Don't recall the exact beginning dimension, but the dimension was about 0.020 too small, and they would not fit over the hub front or rear.

Second off to the sandblaster. At first I was a little upset as the finish after blasting was very, very rough, and all of the rust was not gone. While I used rust converter (applied liberally), I put on my thinking cap as to how to deal with the rough finish.

Medium steel wool is what I tried first, and I was very pleased with the result. The rust converter seemed to do it's job... so I did mine, man I am sore... steel wool + 5 wheels (all surfaces) = one day of hard labour. I was also left feeling a little unsure as to how the paint would end up looking.

So, off to the laundry tub for a good scrub with soap and water, towel dry, a liberal application of One Choice wax and grease remover. Two coats of primer, and three coats of semi gloss black, and I am very happy with the result.

Tomorrow, ordering the rubber, hoping to have them on by the weekend. I am a hot rodder at heart, so big ones back there, and littler ones up front.

Next up, beauty rings, and center caps!

Mad Rods 06-03-2012 11:48 PM

Re: What did you do to your truck today?
 
This !!!!!!!!!!!!!
http://i941.photobucket.com/albums/a...s/58a573f1.jpg
Posted via Mobile Device

markeb01 06-04-2012 02:01 AM

Re: What did you do to your truck today?
 
Excellent, I really like how they turned out. Looking forward to seeing them on your truck.

Quote:

Originally Posted by CRGRS 66 (Post 5415886)
Tomorrow, ordering the rubber, hoping to have them on by the weekend. I am a hot rodder at heart, so big ones back there, and littler ones up front.

Next up, beauty rings, and center caps!


CRGRS 66 06-04-2012 10:01 AM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by markeb01 (Post 5416050)
Excellent, I really like how they turned out. Looking forward to seeing them on your truck.

Me too! Undecided on the tire sizes, either 275/60R15's on the back, and 225/70R15's on the front, or 295/50R15's on the back, and 235/60R15's on the front...

Johnny Too Bad 06-04-2012 02:48 PM

Re: What did you do to your truck today?
 
3 Attachment(s)
Retrofitted the fan shroud off of my '77 350 sbc parts truck and installed in my '64. A lot of notching and I had to fab some brackets, but it fits and works well.

1963c-10 06-04-2012 03:26 PM

Re: What did you do to your truck today?
 
2 Attachment(s)
Finshed the grill and got the new rear window rubber in. More pics on my build thread

markeb01 06-04-2012 03:52 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by CRGRS 66 (Post 5416328)
Me too! Undecided on the tire sizes, either 275/60R15's on the back, and 225/70R15's on the front, or 295/50R15's on the back, and 235/60R15's on the front...

Should you be interested in something to compare against, I’m running 255/70’s on the rear and 215 /70’s on the front, all on 15x7” wheels. The Fleetside bed accommodates much wider rear tires than the stepside. As a diameter reference my front tires are 26.89” tall and the rears are listed as 29.1” tall.

Ta2Don 06-04-2012 09:50 PM

Re: What did you do to your truck today?
 
1 Attachment(s)
Got the '85 donor crossmember bolted in...

CRGRS 66 06-04-2012 10:05 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by markeb01 (Post 5416843)
Should you be interested in something to compare against, I’m running 255/70’s on the rear and 215 /70’s on the front, all on 15x7” wheels. The Fleetside bed accommodates much wider rear tires than the stepside. As a diameter reference my front tires are 26.89” tall and the rears are listed as 29.1” tall.

Thanks, appreciate that. BTW, I told my wife that markeb zero one said my wheels look good, and if markeb zero one says wheels look good, then your wheels look good! A compliment from the master, hopefully one day I can snatch the pebble:ito:

motiveauto 06-04-2012 10:22 PM

Re: What did you do to your truck today?
 
Wired up my heater and then put in the defroster hoses!
Posted via Mobile Device

Ta2Don 06-07-2012 06:24 PM

Re: What did you do to your truck today?
 
Dropped spindles and rear springs came in today, gonna be an interesting weekend!

Raked 64 06-07-2012 08:06 PM

Re: What did you do to your truck today?
 
1 Attachment(s)
Finally finished mounting the bed and took it for the first drive in 20 years!! :metal:
Wow! I forgot how much i love this truck!
I need to tidy up a few things and get the tailgate painted etc. But i am super happy

el_bole 06-07-2012 08:12 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by Raked 64 (Post 5422633)
Finally finished mounting the bed and took it for the first drive in 20 years!! :metal:
Wow! I forgot how much i love this truck!
I need to tidy up a few things and get the tailgate painted etc. But i am super happy

Raked 64,

Looks great! Congrats on her "maiden" voyage.....

el_bole:ito:

Str8-6-68 06-07-2012 08:15 PM

Re: What did you do to your truck today?
 
Congrats Raked 64 that must be a blast I cant wait till I can take my build for its first drive. :burnout:

CRGRS 66 06-07-2012 09:59 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by Raked 64 (Post 5422633)
Finally finished mounting the bed and took it for the first drive in 20 years!! :metal:
Wow! I forgot how much i love this truck!
I need to tidy up a few things and get the tailgate painted etc. But i am super happy

AWESOME, CONGRATS, must have been a great feeling, let's see some more pics of "finished" product!!!!

rideblue00 06-08-2012 09:53 PM

Re: What did you do to your truck today?
 
2 Attachment(s)
Got a couple of steering wheels painted and assembled.

Mad Rods 06-08-2012 09:57 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by rideblue00 (Post 5424450)
Got a couple of steering wheels painted and assembled.

Just curious do you sell them or are the for your personal ride?.... They look good!!!!... I like the one on top
Posted via Mobile Device

chainsaw 06-09-2012 05:52 PM

Re: What did you do to your truck today?
 
Just cut and buffed the hood.

boat 06-09-2012 05:56 PM

Re: What did you do to your truck today?
 
2 Attachment(s)
been working on a bunch of small items, its taking me forever theres alot of parts you dont realize that need to be cleaned or finished if you are going to do it right .painted these bad boys up still need glass and weather strip

boat 06-09-2012 05:57 PM

Re: What did you do to your truck today?
 
1 Attachment(s)
http://67-72chevytrucks.com/vboard/a...1&d=1339279059

MisterC 06-09-2012 06:53 PM

Re: What did you do to your truck today?
 
Those look sooo nice! I need to do that on mine as well, but haven't had the will to undertake it.

Alan's Classic 06-09-2012 09:13 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by boat (Post 5425627)
been working on a bunch of small items, its taking me forever theres alot of parts you dont realize that need to be cleaned or finished if you are going to do it right .painted these bad boys up still need glass and weather strip

Nice work, Steve

markeb01 06-09-2012 09:59 PM

Re: What did you do to your truck today?
 
Dove into the struggle with the vinyl floor mat today. Time will tell how nice it turns out, but it is without question the most difficult installation I've ever encountered. It's like trying to wrestle a sheet of ABS plastic into the shape of a truck floor!

dantimdad 06-09-2012 10:11 PM

Re: What did you do to your truck today?
 
finished the patching of the passenger side inner fender.

Then my son and I cleaned them up along with the core support and shot on 3 coats of hammer paint on the driver side one and the core support.

It looks fantastic!

I have to make a few comments on this paint:

First, it covers incredibly well.

Second, it is very very easy to spray when you thin it 20% with acetone.

Third, it covers imperfections way better than I expected.

The only drawback is that it dries slow. It took over 7 hours to stop being tacky. Luckily it won't be bolted back together for at least two months so it will have plenty of time to dry.

I ran out of paint and have to paint the other one tomorrow. I will take pics then as well because I forgot my camera today.

Steven

Rich 5150 69 06-09-2012 10:16 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by markeb01 (Post 5425966)
Dove into the struggle with the vinyl floor mat today. Time will tell how nice it turns out, but it is without question the most difficult installation I've ever encountered. It's like trying to wrestle a sheet of ABS plastic into the shape of a truck floor!

:lol::lol:.Mark did you lay it out in the sun before hand....?


All times are GMT -4. The time now is 11:17 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com