The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   What did you do to your truck today? (https://67-72chevytrucks.com/vboard/showthread.php?t=368988)

WhippinSaw 11-28-2013 11:05 PM

Re: What did you do to your truck today?
 
[QUOTE=La Zona Imagery;6393181]My chrome grill and bumper came in the mail yesterday, so I installed them today. Damn the original bumper bolts were all rusted and frozen. I had to cut them off with a wheel cutter.

Looks great with the chrome wheels, definitely worth the money, x2 on the side trim, more bling the better

mud.man.rj 11-29-2013 01:50 AM

Re: What did you do to your truck today?
 
What a big difference a chrome gril, bezels and bumper make, well worth it.

Trsmotrhed 11-29-2013 10:31 AM

Re: What did you do to your truck today?
 
[QUOTE=La Zona Imagery;6393181]My chrome grill and bumper came in the mail yesterday, so I installed them today. Damn the original bumper bolts were all rusted and frozen. I had to cut them off with a wheel cutter.

before:

Where did you order the parts from? Did they fit good?
Looks great.

endlessearth 11-29-2013 03:45 PM

Re: What did you do to your truck today?
 
The new 355 block with the heads cannibalized from my original 283 block is painted and nearly ready for final assembly and install.
http://imageshack.com/a/img811/34/02ub.jpg
http://imageshack.com/a/img541/5262/538s.jpg

Mack B 11-29-2013 08:42 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by endlessearth (Post 6394040)
The new 355 block with the heads cannibalized from my original 283 block is painted and nearly ready for final assembly and install.
http://imageshack.com/mg811/34/02ub.jpg
http://imageshack.com/a/541/5262/538s.jpg

I love the way that looks, I've considered doing the same, what's your plan for the Pcv valve?

endlessearth 11-29-2013 09:19 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by Mack B (Post 6394381)
I love the way that looks, I've considered doing the same, what's your plan for the Pcv valve?

My friend and hot rod builder, Chip Quinn here in Phoenix, drilled the back of the manifold and built a baffle underneath. There will be a vent at the fill tube. I would give you more details but I am out of my league. Chip reads this thread and will chime in I am sure.

groundbound64 11-30-2013 01:32 AM

Re: What did you do to your truck today?
 
1 Attachment(s)
My buddy and I worked on my air ride. Getting so close to being done.

groundbound64 11-30-2013 01:36 AM

Re: What did you do to your truck today?
 
1 Attachment(s)
back

groundbound64 11-30-2013 01:38 AM

Re: What did you do to your truck today?
 
1 Attachment(s)
inside bed

mud.man.rj 11-30-2013 02:28 AM

Re: What did you do to your truck today?
 
Nice work, really tuckin the rears well.

lowlife4life 11-30-2013 07:06 AM

Re: What did you do to your truck today?
 
1 Attachment(s)
Man that looks sick tucked in the step.
Got one box side shortened up so I can start my 4 link and have the wheel entered. Still have a lot of work to make the tire fit properly.

lowlife4life 11-30-2013 07:10 AM

Re: What did you do to your truck today?
 
1 Attachment(s)
Will sit here with no air. And the pinch weld is going off the rocker . Don't see changing a flat to be very fun!

mud.man.rj 11-30-2013 03:17 PM

Re: What did you do to your truck today?
 
:lol: Changing a flat, that is funny, just take the box off. Everything has something about it doesn't it, just like a lifted truck, a give and take, but all fun and cool at the same time.

A.T. RockDriller 11-30-2013 03:32 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by mud.man.rj (Post 6395241)
:lol: Changing a flat, that is funny, just take the box off. Everything has something about it doesn't it, just like a lifted truck, a give and take, but all fun and cool at the same time.

That's why they're called "run-flats"..

joedoh 11-30-2013 06:12 PM

Re: What did you do to your truck today?
 
make the bed tilt!

http://i103.photobucket.com/albums/m...psf855ca61.jpg

I have 31" rear tires, and I was perfectly happy with wingnuts on the bed mounting bolts :lol: the guy building the backhalf decided it should tilt.

19666Trucker 11-30-2013 07:26 PM

Re: What did you do to your truck today?
 
1 Attachment(s)
Got the spot mirrors installed hope this helps with blind spots.

Dillon Rock 11-30-2013 08:50 PM

Re: What did you do to your truck today?
 
Just hauled a 1/2 cord of wood today in mine, probably the first heavy load that truck's hauled in maybe 10-15 years, lol. Did good too, gonna install my spotlight tomorrow and maybe work on the cab lights later this week.

wjjeeper 12-01-2013 12:25 AM

Re: What did you do to your truck today?
 
Nothing..... Waiting on parts.

Softpatch 12-01-2013 12:49 AM

Re: What did you do to your truck today?
 
Wow looking at your guys pictures look like I'm way out of my league.

Just put in a few gallon of fuel in warmed it up worked the heater/ defrost
went for a 3 mile road trip while working the kickdown/passing gear all the time think about pulling the windshield and sealing the drip rail.....sorry
.
.
.
.
.
.
.

.
http://i288.photobucket.com/albums/l...ps8d62a37e.jpg

sodly 12-01-2013 02:10 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by 19666Trucker (Post 6395476)
Got the spot mirrors installed hope this helps with blind spots.

Can you show the other side of the mirror? What size is it and where did you get it? Thanks.

RANDY COX 12-01-2013 05:38 PM

Re: What did you do to your truck today?
 
installed my new hood
http://i1168.photobucket.com/albums/...psd63ec6c4.jpg

19666Trucker 12-01-2013 06:38 PM

Re: What did you do to your truck today?
 
1 Attachment(s)
Quote:

Originally Posted by sodly (Post 6396470)
Can you show the other side of the mirror? What size is it and where did you get it? Thanks.

97802, trucklite, napa $12, they have a stainless too that #97872

19666Trucker 12-01-2013 06:44 PM

Re: What did you do to your truck today?
 
2 Attachment(s)
Hope these are right side up

T2vigil 12-01-2013 07:01 PM

Re: What did you do to your truck today?
 
I had a long talk with Santa and Tom Langdon and they thought I was good enough for a new Split cast manifold for my 250 along with the new Webber 2 barrel carb with adaptors. This will keep me busy during the Christmas Holidays.

TJ's Chevy 12-01-2013 08:40 PM

Re: What did you do to your truck today?
 
Sat and thought about future plans for it. :chevy:

TJ's Chevy 12-01-2013 08:42 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by 19666Trucker (Post 6396795)
Hope these are right side up

Those are nice! Didn't know they made those! Just might get a set for mine to! lol!:chevy:

LT1 Burb 12-01-2013 08:45 PM

Re: What did you do to your truck today?
 
1 Attachment(s)
Made a targa out of my parts cab.

A.T. RockDriller 12-02-2013 04:04 AM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by LT1 Burb (Post 6397002)
Made a targa out of my parts cab.

Funny thing about how that got my hard drive sparkin up a bit.
A true T-Top is something I haven't seen yet......but if it was done right.....
It would sure be more appealing than some of the "top mods" I've seen.

jtrichard 12-02-2013 04:16 AM

Re: What did you do to your truck today?
 
19666 i like the mirror image of the (right)left side of your rig

Chevy Fleetside 12-02-2013 11:23 PM

Re: What did you do to your truck today?
 
I hooked the heater up and it freakin worked... :metal:

AzCountryman 12-02-2013 11:47 PM

Re: What did you do to your truck today?
 
Went to local shop today and got a new brake pedal pad (2nd one I have got..they seem to dry rot easily)..dome light fixture....door panel screws....head light knob and rod. minor things but all needed done.

earl84 12-03-2013 09:17 AM

Re: What did you do to your truck today?
 
Yesterday, got some side molding from a great guy from a CL ad, turned him on to this site. Stopped by a junkyard that had a couple 64-66 trucks. I was gonna grab a gauge cluster and possibly the Chevrolet script valve covers. The trucks were in rough shape but had some decent parts. Found out they had crushed them LAST WEEK, I was sick.

1963c-10 12-03-2013 12:00 PM

Re: What did you do to your truck today?
 
Came out of the post office to find a puddle of antifreeze on my floor board. Guess I'll be replacing a heater core in the next few days.

Update....Heater core ordered from Advanced with 15% discount...of coarse its a special order part so 3-5 days to arrive. Napa, O'Reillys, Auto Zone are $15-25 higher and all still special order.

Part # for 60-63 w/recirculating heater is #394162 if it helps anyone else.

TJ's Chevy 12-03-2013 12:23 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by 1963c-10 (Post 6399539)
Came out of the post office to find a puddle of antifreeze on my floor board. Guess I'll be replacing a heater core in the next few days.

Update....Heater core ordered from Advanced with 15% discount...of coarse its a special order part so 3-5 days to arrive. Napa, O'Reillys, Auto Zone are $15-25 higher and all still special order.

Part # for 60-63 w/recirculating heater is #394162 if it helps anyone else.

That's a shame! I'm lucky mine isn't dumping antifreeze all over my floor! lol! Glad you were able to find a new one though!

Snailed 12-03-2013 01:09 PM

Re: What did you do to your truck today?
 
1 Attachment(s)
I got a pair of 3 pt seatbelts meant to be replacements for H1 Hummers for about $55 shipped on ebay and put them in my '66. They are all black, and pretty plain but they fit and work well. They are made by an OE supplier for seatbelts. The guys name is wolfer-parts on ebay.


I made 2" x 6" x .125" plates and plug welded them in the B pillars. The retractors got mounted on the rear wall of the cab with similar reinforcing plates. I feel a lot more safe sitting in front of a steel dash and solid steering shaft now :)

1963c-10 12-03-2013 02:15 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by T.J. MCCAULEY (Post 6399574)
That's a shame! I'm lucky mine isn't dumping antifreeze all over my floor! lol! Glad you were able to find a new one though!

Its the OEM Harrison core too....so may have the tanks removed and installed on a new core down the road, but in the mean time its getting colder here in NC (already had temps in the 20's-30's) and I need a heater, so Advanced Auto will have to do. Bad part is I have a OEM core from a 64 sitting on the shelf, but model change was 60-63 and 64-66, so guess I need to find a new home for the OEM 64 Harrison core.

Grizz1963 12-03-2013 02:52 PM

Re: What did you do to your truck today?
 
Had yesterday and today off as annual leave and today moved a lovely leather clad chair and large foot stool over to my stepson, Tom's father's home for him to put in his bedroom.

The truck obviously did not feel the load.

Tom asked to ride in the back on his new chair, but of course in this day and age it could get you locked up for years..... So when we got there he got to test drive the chair in the back of the truck.

http://i294.photobucket.com/albums/m...ps2cf6c75c.jpg

http://i294.photobucket.com/albums/m...ps41cba8b0.jpg


After dropping him and the chair off, Nicola and I went off to Hempstead valley shopping centre for a walk about, and coffee and cake.

She thoroughly enjoys watching people trip over their feet and walk into stuff when the Redneck Express comes by.

Parked to one side of the carpark, as the truck takes up a bit more spae than most modern family cars here.

http://i294.photobucket.com/albums/m...ps027e195a.jpg

As always, the smiles per mile ratio far outweighed the miles per gallon delivery.

This truck really is one of the best Bucket list things I have ever done.

Thanks to my wife.:mm::mm::mm:

Trsmotrhed 12-04-2013 10:19 PM

Re: What did you do to your truck today?
 
Got my new LED taillights today from Summit Racing. To dang cold to try them out.

http://i1280.photobucket.com/albums/...ps46dfac2c.jpg

http://i1280.photobucket.com/albums/...ps6f81cc01.jpg

glos55 12-05-2013 07:08 AM

Re: What did you do to your truck today?
 
1 Attachment(s)
This was yesterday....truck doesn't run and bad weather is coming. Got on the phone and started rounding up some muscle. Need to push it into the garage :sumo:

glos55 12-05-2013 07:57 AM

Re: What did you do to your truck today?
 
1 Attachment(s)
Quote:

Originally Posted by glos55 (Post 6402652)
This was yesterday....truck doesn't run and bad weather is coming. Got on the phone and started rounding up some muscle. Need to push it into the garage :sumo:

Muscle arrived and Ugly Fugly is out of the weather ;)


All times are GMT -4. The time now is 12:21 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com