Re: What did you do to your truck today?
 

What are you doing first? I wish I would have found it. You have a good find.

Re: What did you do to your truck today?
 

Last weekend I started making some paint curtains for my garage--shoulda done this a long time ago--
They're just 9'x12' canvas drop cloths with some brass grommets set into the edge.

{\rtf1\ansi\ansicpg1252
{\fonttbl\f0\fnil\fcharset0 Verdana;}
{\colortbl;\red255\green255\blue255;\red0\green0\blue0;\red255\green255\blue255;}
\deftab720
\pard\pardeftab720\partightenfactor0

\f0\fs26 \cf2 \cb3 \expnd0\expndtw0\kerning0
\outl0\strokewidth0 \strokec2 \uc0\u8234 http://67-72chevytrucks.com/vboard/p...ictureid=18800\uc0\u8236 }

Re: What did you do to your truck today?
 

Just finished a 3 day process to refurbish my 1965 C10 brake clutch pedal bracket assembly.

BEFORE

Re: What did you do to your truck today?
 

Re: What did you do to your truck today?
 

I worked on the polishing of the center console lid that I picked up awhile back. Down to 1200 grit. I'm getting there. I also painted some of my serpentine stuff that I bead blasted and cleaned up.

Re: What did you do to your truck today?
 

Thank-you! I need to get it road worthy first..... wheels and tires and a lowered stance. I have the new springs and shocks ordered. I'd like to get it to sit like my 65

Re: What did you do to your truck today?
 

Ordered a right hand side mirror for my Suicide Doors:
http://www.lmctruck.com/features/cbe/images/CBEMIQ.jpg
http://67-72chevytrucks.com/vboard/a...1&d=1372882571

http://www.state-flags-usa.com/nc.gifhttps://2tydsa.bay.livefilestore.com...Pro_Street.gifhttp://i273.photobucket.com/albums/j...stian_flag.gif

Re: What did you do to your truck today?
 

I was driving down the freeway with the transmission whining away. The anticipation of the Odometer ready to flip to 55000 and when it got to 54999.9 it died. It just clicks and won't turn and the needle is jumping alot.
I am going to go to my shop and get another speedo today.

Re: What did you do to your truck today?
 

Had Martin over for a few hours today, to bring back my bike trailer after unloading his new motor and gearbox into his garage.

We recently took out the one rear indicator unit as he wants to fit recessed indicators as per originals, which his truck does not have. After taking it out, we could not get the light to work again, so after resoldering the wires etc, it turned out the one wire on the switch was loose.

The next job Martin did for me (I made tea and coffee) was to wire in a Beeper into the indicator circuit.
My truck has no indicator stalk on the steering column, having a three position swith under the dash, I have on occasion driven well beyond a turning with the indicator merrily flashing away.

So now it will drive me nuts when I use it, necessitating the fast switching off of it.

The way its fitted, the beeper is now under the dash and muted to a mildly irritating level.

Here is a demo.....


One of the other things we figured out was that my truck must have been a Manual truck at some time in its life before the current incarnation.

We also tested the new compressor to see if it had an auto pressure switch.

Goes to 100psi and then stops filling.

I have still not quite figured out where the pressure goes when the pressure switch goes, as the motor does not stop......:mm:

Re: What did you do to your truck today?
 

Started yesterday and almost finished a bag system, 4 wheel disc set up with dropped spindles and blocks. Should be done tomorrow.

Re: What did you do to your truck today?
 

pulled motor and trans (454-th400) out of downer 78 suburban, also pulled out fuel tank and outside mirrors. Was going to just pull it and stick it into the 65 1 ton camper, but soft plug above starter is starting to leak and rear main seal leaking. So decided to pull heads and replace all gaskets, seals and check out. Cam &lifters look good , cylinders and brgs look good, timing chain not so much! So gasket set, soft plugs, timing set, flywheel, and harmonic balancer ordered. will try to remember to take picks of assembly, forgot to take picks of removal and tear down.

Re: What did you do to your truck today?
 

Found this MFG`r the other day...front LED and some others...
http://www.rodworx.com/product.php?item=766
http://www.rodworx.com/pr_images/DSCN3722.JPG

Re: What did you do to your truck today?
 

Re-adjusted my rocker arms and put a new valve cover gasket today. Discovered a slightly bent pushrod....far from scary and a possibility of a blown head gasket. Still running strong though! Like a chevy does so well!:chevy::sumo:

Re: What did you do to your truck today?
 

pressure washed under hood and transmission to get ready for installation.

Re: What did you do to your truck today?
 

Starter is on and motor turns over

Re: What did you do to your truck today?
 

Posting up on behalf of Martin my mate who cannot be bothered with posting, as he is too busy building :mm::mm::mm::mm::mm:

His step sons twist and go scooter was stolen at work on Thursday evening at work, literally behind the filling station building where he works.

So his manager gave him three days "off" to find another mode of transport, because he lives about 20 miles from where he works.

This left martin holding the an, as he knows a bit and has the truck, his tow car that we used a few weeks ago to fetch the V8 engine and gearbox with is not well at the moment...... so the Chevy was put into service, doing about 200 miles on Saturday to go look at and ultimately buy another 125cc learner sized bike for Mikey.

Little bike looks minute on the back, so hopefully the V-Rod will fill the space better when the truck is done.

http://i294.photobucket.com/albums/m...ps65375230.jpg

http://i294.photobucket.com/albums/m...ps4ad77252.jpg

Truck used as security anchor for the little bike.

http://i294.photobucket.com/albums/m...psaee02128.jpg

Re: What did you do to your truck today?
 

Worked on gutting the interior of my cab, getting it ready to come off the frame.

Re: What did you do to your truck today?
 

I had a couple hours available today, so I swung by the shop and deleted the factory firewall holes for the engine harness, oil pressure line, and headlight/horn harness, along with a few other small holes (six holes total thus far). The engine harness and headlight/horn wiring will be relocated so that the wiring is hidden from view.

http://i6.photobucket.com/albums/y20...0/P1180315.jpg

Re: What did you do to your truck today?
 

Pics I did not have earlier.....

Martin had a tyre de-laminate last week, lost most of its tread.

Then he got lucky on Ebay and bought two 1 inch white walls, almost new for £80,00 fitted....... now that is called making your own luck.

http://i294.photobucket.com/albums/m...se6ff9cf6.jpeg

http://i294.photobucket.com/albums/m...sc7aa5a5d.jpeg

Re: What did you do to your truck today?
 

Nice idea on getting rid of the firewall holes and hiding the wiring harness, have done a lot of that on builds and most customers are so happy with how clean it looks and don't exactly know what I did, but like the underhood a lot better. I usually don't tell them either.

Re: What did you do to your truck today?
 

Traded $2,000 labour on a TJ Jeep lift and engine mods for a 99 S10 ZR2 4x4 and did a quick going over on it and a few mods of parts I had saved then sold it for $2,800 cash to pay for my 40" Mud grapplers I ordered 2 weeks ago for my truck, have to do the barter system to keep the wife happy these days now that my twins are graduating this fall and leaving for school will be a bit low on cash. Next Mods will have to be thrifty.:lol:
http://i1199.photobucket.com/albums/...ps08fbf2a0.jpg
http://i1199.photobucket.com/albums/...ps02b631a0.jpg
http://i1199.photobucket.com/albums/...ps641ed47e.jpg
Mudman.

Re: What did you do to your truck today?
 

Wow, I hated slot mags in the 80s when I was in high school, and I love them now. Looking good, grizz!

Re: What did you do to your truck today?
 

My son likes the hole filled in firewall too... :lol:

Re: What did you do to your truck today?
 

What did I do to my truck today?.....Drove it! Just like every other day-the 'ol '65 daily driver is just that.
Been gone a while, re couping from surgery on my hand and the Mrs getting a 2nd total hip replacement this year(now has a matched set of shiny new ones, LOL)

Did do a dual reservoir master cylinder upgrade and all new brake lines and hoses. Kept with the drum brakes. Had to opt out to the recommended ECM that Painless suggests for a Camaro. Mine was from the '91 Olds donor and wanted to keep setting an "intake air temp low" DTC(of which there was no sensor or harness for) Check engine light off all the time now, running great and getting and average 15 MPG, but that is all stop and go, in town only driving. Highway numbers get closer to 19 mpg,but lockup on the TH350C not always engaging. Switching to computer controlled 700R4 soon.

Re: What did you do to your truck today?
 

Thought about mine today.....waiting for the future hotrod rebuild of the 6 banger!

Re: What did you do to your truck today?
 

This is a bit of a cross over reply.

I bought a 210 liter compressor from a mate for £100.00 a while ago, but the thing is £&%$$%£ Heavy.

So I decided to add some wheels.

Original plan was to buy four with single bolt fixing......

But then I said to Mickey next door that a shopping trolley would work well.

He then got me a broken bakers trolley from a skip at a job he was on.

So the trolley was the Tip Treasure.

[img src="http://i294.photobucket.com/albums/mm90/niknakpix/Billybob178_zps45c5bf60.jpg" alt=" "]

Said trolley

http://i294.photobucket.com/albums/m...ps0e4ce88d.jpg

Stripped wheels off.

http://i294.photobucket.com/albums/m...ps8dcdf9a1.jpg

Had some 10mm steel plate to cut to size for mounting the wheels onto

http://i294.photobucket.com/albums/m...psb7edb2de.jpg

Was going to engineer and drill holes, recess the heads etc, to recycle the allen head screws and nuts, but decided it was a PITA not worth pursuing. So welded the holes onto the plates and tacked the corners and edges.

http://i294.photobucket.com/albums/m...ps6c2caea6.jpg

Went out for the afternoon, getting home around 16.00 and then back to the garage.

It was already getting dark, but then who needs light when you weld??

I used the small jack to lift the tank to the right height and a couple of magnets to hold the wheels in place.

http://i294.photobucket.com/albums/m...ps93189cc1.jpg

http://i294.photobucket.com/albums/m...psf5e39bd9.jpg

View from outside.

http://i294.photobucket.com/albums/m...ps039cd838.jpg

JOB DONE......Mobile compressor.


http://i294.photobucket.com/albums/m...psae200465.jpg


Close up time for today.

http://i294.photobucket.com/albums/m...ps7c97342a.jpg



Tomorrow I need to get under and about the truck to see what bits of patch panels I need to order in from the USA.

Looking forward to getting on with the body work and of course paint in the new year.

Re: What did you do to your truck today?
 

Today I took pictures of the truck and whored it up on this forum. Yesterday installed rear trac bar, lowering blocks and new u bolts.

Re: What did you do to your truck today?
 

Grizz,

You know if you ever get a flat on one of those compressor tires, its gonna be a bear to change. ;)

Re: What did you do to your truck today?
 

Started running fuel lines on my 65.

Re: What did you do to your truck today?
 

Opinions and advice sought please.

When I bought the truck, I knew it would need a complete resto and repaint to get it looking the way I want it to be.

I originally had a colour change in mind to a traditional mint green and white combo, or a real farmer brown green colour with off white detailing. But within a week of buying the truck, I knew it would stay the "in your face" red that it had been painted 10 years ago before leaving California.

I also knew it had some rust, and that is was very little for a 47 year old vehicle.

However, I was surprised at the rust when I started looking around under the truck.

There are a few holes that will need new metal welded in after surgery, and then some dents and scrapes to fix. All of these I am prepared to give a go, however, I will be buying and importing some steel patch panels.

I am happy to hear from anyone who has experience in using the panels that are available in the market from the likes of LMC, Top Banana and others, which are best for quality and fit.

Below are a few pics of my fenders and also the front, bottom corners of both doors.

Passenger door underside. The fender on this side seems fairly intact, but I may just bite the bullet and replace that whole side while on the metal work and paint.

http://i294.photobucket.com/albums/m...ps87495d1c.jpg

Driver side fender corner...... this is bad, it is loose, and the inner support is rotten as well.
I suspect you could pull the whole bottom off without much effort.

http://i294.photobucket.com/albums/m...ps672d3740.jpg

Inside view...... made me want to cry. I will get the whole support for this side, rather than patching it up. The passenger side seems totally solid.

http://i294.photobucket.com/albums/m...ps0360b91d.jpg

http://i294.photobucket.com/albums/m...ps15d52c6e.jpg

Drivers side lower door front corner. I am happy to make up path panels for the two doors as they are out of sight.

http://i294.photobucket.com/albums/m...ps552d4bf3.jpg

As mentioned above, please do add any comments and advice you may have for me regarding repairing the rust.
The trucks sills and cab corners are completely solid, and there are small bits of rust on the inner fenders just behind the grille and front support.

As can be seen in this pic.

http://i294.photobucket.com/albums/m...psd7065f91.jpg


==================================================================================================== ======



The other thing I looked at today was the placement of the rev counter my buddy Tim gave me in August.

I did not want to fit it till the truck was painted, but realized that placing it and wiring it up will not stop me from the paint and prep. I plan on going for a satin black dash, or satin black and red combo.

My question is this......

Where do most people place rev counters?

Sensible, practical, visible etc.....

Here is mine, just held in place or placed in position to get and idea.

Opinions, advice ??

http://i294.photobucket.com/albums/m...ps223e0a5d.jpg

Somewhere in the left hand corner.

http://i294.photobucket.com/albums/m...ps1bff2d57.jpg


Over to the right ??

http://i294.photobucket.com/albums/m...ps4e75e20a.jpg


Looking forward to ideas etc....

Thanks, Rian.

Re: What did you do to your truck today?
 

Hey grizz1963....id get replacement doors if possible. If not definitely get new door skins and lower inside patches.

Re: What did you do to your truck today?
 

put the tach on the column. I personally don't look at the speedo much...

Re: What did you do to your truck today?
 

WRONG! I met grizz on here, and being the jack-of-all trades that he is--wood, vans, campers, house-construction, cars, hvac, trucks, just to name a few--I'd bet he's already got a space-saver spare hidden on that comp. somewhere! (Good luck, grizz, with your new truck.)
Sam

Re: What did you do to your truck today?
 

Grizz, you'll find a LOT of recommendations for Top Banana when it comes to patch panels here on these forums. I've installed a bunch of their panels on the '65 C10 I'm working on, and I'm happy with the panels I received.

As for the tach, personally, I'd get a smaller one with a more appropriate range. Wherever you put it, it would be less obstructive to your view, and with a smaller range, it will be easier to read.

Re: What did you do to your truck today?
 

:but::but::but::but::truck:

I have a small trenching tool (folding spade) that I would use to lift up the side that needed a spare fitted..... that's how I got the jack in last night. ;)

Re: What did you do to your truck today?
 

I think I like the idea of top left, but column makes more sense

Living in the UK, doors may be a bit of a problem, as will skins, much as I would love complete doors and fenders to fit.

Hey Sam, you sure its the same guy you are thinking of?? :lol::lol::lol:
What does hvac stand for...... heating, ventilation, air conditioning?? (Google says this.)

I like the look of a tach, but prefer the cab to be clean with minimal extras, so may look for a trade for a smaller unit, or even stay without, as my ears are still good, as is the seat of my pants for feeling vibrations.

Choices, choices......

Re: What did you do to your truck today?
 

Finally found a locksmith who could cut a key from the code on the driver's door cylinder. Got lucky & the key fit the ignition too. So I can finally start the shortbed w/o hotwiring it, and can lock the cab. This means it doesn't have to stay locked in the garage just too keep it from wandering off, meaning I have a free bay to get some stuff done on all the various vehicle projects here.

Re: What did you do to your truck today?
 

I pulled open a Camaro V8 T5 tranny, cleaned, inspected and then reassembled it. It was FUN!

It's not the same as working on my truck, but it still qualifies because I will put a T5 tranny in my truck instead of the original 3 speed.

Re: What did you do to your truck today?
 

@ Lugnutz65 You are like many of us......jobs not done 'till its done.

Well done !!

Re: What did you do to your truck today?
 

...added clear parking lenses and led tail lights

http://www.lazonaimagery.com/main/c10_10.jpg

http://www.lazonaimagery.com/main/c10_11.jpg