The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   What did you do to your truck today? (https://67-72chevytrucks.com/vboard/showthread.php?t=368988)

CRGRS 66 06-17-2012 11:37 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by jsdoyle (Post 5440067)
Replaced the brake booster and master cylinder on the 65. Bolted on 74 C10 parts and only had to extend the brake rod slightly to reach the brake pedal.

WOW! I now have brakes!! I don't need to stand on them anymore! So much more fun to drive!

are you running a booster with front drums?

jsdoyle 06-17-2012 11:57 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by CRGRS 66 (Post 5440113)
are you running a booster with front drums?

Nope. I have front discs and rear drums.
Posted via Mobile Device

CRGRS 66 06-18-2012 12:04 AM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by jsdoyle (Post 5440159)
Nope. I have front discs and rear drums.
Posted via Mobile Device

Thanks, hey, you and I talked about rubber recently too. I now have my 225/60R15's on the front, 295/50R15's for the back not due in for 2 more weeks.

jsdoyle 06-18-2012 12:15 AM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by CRGRS 66 (Post 5440169)
Thanks, hey, you and I talked about rubber recently too. I now have my 225/60R15's on the front, 295/50R15's for the back not due in for 2 more weeks.

Those are going to be some big rears! Let me know how they work out. I like that wide look in the back... Of the truck. :)
Posted via Mobile Device

CRGRS 66 06-18-2012 07:56 AM

Re: What did you do to your truck today?
 
Will do, and found a Camaro with 295/50R15's on the back at a cruise night, they looked great, but photo's I took did not do them justice

dantimdad 06-18-2012 11:25 AM

Re: What did you do to your truck today?
 
Yesterday, I test fit the inner fenders to the core support. Fit great!

Then I removed the interior in prep for removing the cab and started removing the steering column so I can shorten it.

Not too much but, still, progress.

Steven

chadh100 06-19-2012 01:47 AM

Re: What did you do to your truck today?
 
extended the pipes to the back and added some chrome tips! It sounds so bad ass now..such a huge difference!

http://i1100.photobucket.com/albums/...-37-05_478.jpg

http://i1100.photobucket.com/albums/...0/Untitled.jpg

3rd Coast Z 06-19-2012 08:09 PM

Re: What did you do to your truck today?
 
Finally got off my lazy butt and finished my instrument cluster.
http://i1225.photobucket.com/albums/...1966/dash2.jpg

And installed into the truck. Everything actually works too.
http://i1225.photobucket.com/albums/.../1966/dash.jpg

corvettejim1968 06-20-2012 12:21 AM

Re: What did you do to your truck today?
 
i took all the bed hooks off the sides of the bed and removed the tool box from the bed.

GRIMACE 65 06-20-2012 01:17 AM

Re: What did you do to your truck today?
 
Installed a complete lock set ( doors, glove box ignition) and installed new felts and rubbers on passenger door on the suburban. Oh ya and put a new ignition switch.
Posted via Mobile Device

Chevy Fleetside 06-21-2012 08:03 PM

Re: What did you do to your truck today?
 
I put the new front park brake cable in but something is missing and I can't remember what the part looks like or i routed it wrong. This is under the dash where it hooks up to the handle.
I also installed the flexplate I just got on the engine and mated the tranny up with it. It is just sitting on the floor waiting to get installed into the truck. Now I just have to get the truck home so i can do this.

Rich 5150 69 06-21-2012 08:26 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by Chevy Fleetside (Post 5447713)
I put the new front park brake cable in but something is missing and I can't remember what the part looks like or i routed it wrong. This is under the dash where it hooks up to the handle.
I also installed the flexplate I just got on the engine and mated the tranny up with it. It is just sitting on the floor waiting to get installed into the truck. Now I just have to get the truck home so i can do this.

Its just a u shaped bracket John that slips over the end of the cable I believe...

awbrown 06-21-2012 09:26 PM

Re: What did you do to your truck today?
 
Just took old blue out for a trip to the bank ,put maybe 10 miles on it ...fun fun fun

1966JSM 06-21-2012 10:35 PM

Re: What did you do to your truck today?
 
just picked up a full set of c6 Z06 calipers

Narxoleptic Customs 06-21-2012 11:24 PM

Re: What did you do to your truck today?
 
Did some taping and sanding for some "pin-stripe" looks around the scallops.

Where it started (sorry, only straight on pic I have)
http://i128.photobucket.com/albums/p...0/8dd03218.jpg

From front
http://i128.photobucket.com/albums/p...0/a9ceae32.jpg

A little closer
http://i128.photobucket.com/albums/p...0/6a961d1c.jpg

The gray primer - light blue paint - dark blue paint comes thru great.
Posted via Mobile Device

Chevy Fleetside 06-21-2012 11:28 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by Rich 5150 69 (Post 5447749)
Its just a u shaped bracket John that slips over the end of the cable I believe...

Let me rephrase that. It is the part that holds the housing so you can put tention on the cable. It has been about 6 years since I took it apart. I can't remember what I did yesterday.. :lol:

markeb01 06-22-2012 12:50 AM

Re: What did you do to your truck today?
 
Met up with my son who handed over some custom aluminum and brass punches he whittled up for me. Now I can get restarted on the windshield trim project. My old steel punches are too big and beat up for such delicate work, and the wood I have available doesn’t hold up long enough. I probably won’t have much need for the big ones on the left, but you never know:

http://img713.imageshack.us/img713/3514/postv.jpg

mud.man.rj 06-22-2012 01:06 AM

Re: What did you do to your truck today?
 
Tonight I drove my truck to the car club meeting and showed the guy's for the first time, so now about 1.5hrs total driving, working just great, love this beast, especially the 460.:gmc2:

losthope 06-22-2012 02:40 AM

Re: What did you do to your truck today?
 
Coming up on owning my 66 for one year in a couple days and took it for its first drive, about 30 miles and no problems !!:metal: cant wait for tomorrow to put some more miles on it

Sneaux 06-22-2012 10:00 PM

Re: What did you do to your truck today?
 
Painted the inside of the cab and got the new GM crate 350 ready to drop in.

Fastest32 06-22-2012 11:11 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by 3rd Coast Z (Post 5443348)
Finally got off my lazy butt and finished my instrument cluster.
http://i1225.photobucket.com/albums/...1966/dash2.jpg

And installed into the truck. Everything actually works too.
http://i1225.photobucket.com/albums/.../1966/dash.jpg

That looks awesome. Way to go man. :metal:
Posted via Mobile Device

MikeS. 06-23-2012 02:39 AM

Re: What did you do to your truck today?
 
Bought '87 4x4 Burb front & rear axles complete with brakes and springs for my '63 4x4 Burb.

markeb01 06-23-2012 06:06 PM

Re: What did you do to your truck today?
 
Knocked all the dents out of the new wide windshield trim.

CRGRS 66 06-23-2012 06:42 PM

Re: What did you do to your truck today?
 
1 Attachment(s)
Finally got my hands on my new beauty rings. The guy was quite upset as he sells the center caps I want, but was out of stock, so I will get the center caps in a couple of weeks.

steve'62 06-23-2012 11:06 PM

Re: What did you do to your truck today?
 
What center caps are they?
Posted via Mobile Device


All times are GMT -4. The time now is 02:58 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com