Re: 198Plus build by Alan's Classic
They are 235-R60/16
Quote:
|
Re: 198Plus build by Alan's Classic
I like the wheels. :bling:
|
Re: 198Plus build by Alan's Classic
These are 265/70X16 It fills the fender really good with a 8" rim. I want to go bigger.
http://belair.smugmug.com/photos/640494877_G6Y7R-M.jpg |
Re: 198Plus build by Alan's Classic
Thanks Alan.... I really didn't have the money but they where a steal !!!!!
Quote:
Quote:
|
Re: 198Plus build by Alan's Classic
Quote:
255/70x16 are 30.05" tall and 10.03 tread width 265/70x16 are 30.5" tall and 10.43 tread width. Both will be about 3" taller, and 3/4 to 1 1/4" wider |
Re: 198Plus build by Alan's Classic
Quote:
|
Re: 198Plus build by Alan's Classic
Thanks, everyone !!!!!
|
Re: 198Plus build by Alan's Classic
I have some 15" cragers. They have the 3 point spinner. Need to be blasted and re diped or painted. I have no use for them but they are for a s10. I think 5x4.5 is that correct.
|
Re: 198Plus build by Alan's Classic
Quote:
|
Re: 198Plus build by Alan's Classic
I think it's a uni lug, it's got little washers that go in so I believe you can change the lug patter if you have the correct ones.
|
Re: 198Plus build by Alan's Classic
Quote:
|
Re: 198Plus build by Alan's Classic
yes they are.
|
Re: 198Plus build by Alan's Classic
Quote:
|
Re: 198Plus build by Alan's Classic
I just dont have all the inserts for them. I bought a s10 and they only had like 2-3 on each wheel
|
Re: 198Plus build by Alan's Classic
sorry for thread jacking 198. what rims are they the S/S or the 610? and how much did you spend for them if you dont mind. I need to sell mine. I have no use for them. The chrome is chipping off so they need to be blasted.
|
Re: 198Plus build by Alan's Classic
Try PEP Boys. They might have them.
|
Re: 198Plus build by Alan's Classic
No problem........;)
Quote:
|
Re: 198Plus build by Alan's Classic
Went out tonight and changed my 6 lug rearend to my new 5 lug 3.07....God it's so much fun doing this by yourself and trying not to scratch it.
Guess I'll start the 5 lug swap next.......Looking real forward to getting the ball joint rivets out. |
Re: 198Plus build by Alan's Classic
I dont get anywork done when threads like these are up on the board. GOSH!
Locking in to watch Alan work..... Roadhammer:chevy: |
Re: 198Plus build by Alan's Classic
Went out this evening and started my cheap disc brake swap using 1987 spindles...... Wasn't as bad as I thought it would be getting the rivets out of the top ball joints....... The hard parts over with now it's all tore apart and ready for re-assembly.....Pics coming soon.
|
Re: 198Plus build by Alan's Classic
cant wait to see the finish project. Is Alan working on anything right now?
|
Re: 198Plus build by Alan's Classic
I talked to him Saturday, he's just chilling out a little right now....Soon as my doors get finished he should be back working on my truck and finishing it up.
Quote:
|
Re: 198Plus build by Alan's Classic
Well things aren't working out to good for me on my disc brake swap.......I guess the 87 spindles I bought are not 87's after I had them powder coated.......Wheel Bearing want fit......Backing plate hits lower a arm......What a pain in the A$$..........:smoke:
Quote:
|
Re: 198Plus build by Alan's Classic
from 81-up there are 2 different spindles...one is for 1 inch rotors, and the other is for 1 1/4 inch rotors. the bearings don't inter-change
|
Re: 198Plus build by Alan's Classic
Thanks.........But the backing plate shouldn't be rubbing on the end of the lower control arm, that's why I think these are the wrong spindles...Maybe they are 1988 and up ??????????????
Quote:
|
All times are GMT -4. The time now is 12:42 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com