Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
http://www.usasupersale.com/images/P..._Generic_1.jpg |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
I got my camaro calipers and brackets from the salvage yards. I'll rebuild them sometime.
I always have thought the positioning of the brake caliper really doesn't matter, except for weight distribution, and on our trucks it would be best to have them on the back. That's where I put mine. |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
I could see where an argument could be made to put them in the rear for traction. I'm thinking along the lines of unsprung weight. Moving the weight toward the trailing arm pivots would be an improvement in that regard.
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
It's the same weight, different moment. :) In all reality though, it's so little weight compared to other things, it really doesn't matter. |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Either way, they look purdy! :thumbs:
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
More progress on the brakes. The hubs have about a 1/16" ridge that prevents the rotors from seating all the way down on the flange. I was able to remove it with careful and even application of a die grinder:
http://i6.photobucket.com/albums/y23...g?t=1198178304 http://i6.photobucket.com/albums/y23...g?t=1198178304 http://i6.photobucket.com/albums/y23...g?t=1198178304 http://i6.photobucket.com/albums/y23...g?t=1198178304 |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Looking sweet! Great work like always!
Josh |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
On the fronts the outer corners of the hubs have to be knocked down in order to run the Coys C5 center caps. Here's a before and after plus a little bonus video of my low-tech method :lol:
http://i6.photobucket.com/albums/y23...g?t=1198178304 http://i6.photobucket.com/albums/y23...g?t=1198178304 http://s6.photobucket.com/albums/y23...h_CIMG3982.jpg |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Then the fronts got a few coats of the high temp silver, and the axles got some black:
http://s6.photobucket.com/albums/y23...3985Medium.jpg http://s6.photobucket.com/albums/y23...3986Medium.jpg http://s6.photobucket.com/albums/y23...3987Medium.jpg http://s6.photobucket.com/albums/y23...3988Medium.jpg http://s6.photobucket.com/albums/y23...3989Medium.jpg |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Looks great! You're making me jealous! I'm interested in seeing what it takes to hook up the emergency brake cables. My calipers just showed up yesterday complete from pads to cables, but it's all pretty ugly used stuff.
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
I wonder is that same modification is needed on the C4 spindle?
I guess I'll know soon enough. :) |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Well, I ran into a minor snag on the rear brake conversion: I got the new bearings in and went to put the seals on... wrong size :rolleyes: Since this is my driver I have to wait for my GF to get home so a can make a NAPA run...
But I roll with the punches; Got one of the front rotors installed with all new bearings and fresh red stuff. Now back out to do the other side! http://s6.photobucket.com/albums/y23...3993Medium.jpg http://s6.photobucket.com/albums/y23...3992Medium.jpg http://s6.photobucket.com/albums/y23...3995Medium.jpg http://s6.photobucket.com/albums/y23...3998Medium.jpg |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Truck is coming together very nicely I am addicted to this thread. That seems to be the norm on the rotors for wheels that have caps I had to do the same.
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Geez, man. New hub caps are like $2 a pair at NAPA... :) jk- lookin' good. Just ordered my rotors today. You should make a commission off of all the sales this thread has led to. Hell, my purchases alone could fund your next mod:lol:
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
Frizzle, Sorry, I should have stated that I'm running the same wheels but since it's a defferent spindle I may not have the same problem. I'll know soon enough. I'm gonna try to actually start something on my truck tomorrow. :o: I have to check my kid's schedules and make sure there aren't any basketball games or birthday parties or .................. you get the picture. :waah: |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
Quote:
Quote:
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Got the other side done. Also figured out the rear end outer seals after two more trips to NAPA... Not sure why the part numbers weren't correlating. Here's the passenger side. Rear brakes will go together tomorrow:metal:
http://s6.photobucket.com/albums/y23...3999Medium.jpg Don't mind my fender pocket; it's getting a whole new clip ;) http://s6.photobucket.com/albums/y23...4000Medium.jpg |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
Thanks for showing what you did. |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
Quote:
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
http://i240.photobucket.com/albums/f...l/DSCF1598.jpg |
All times are GMT -4. The time now is 04:17 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com