![]() |
Re: Its Mine the World Famous 67 Dragtruck
time for a 572 :D
|
Re: Its Mine the World Famous 67 Dragtruck
Quote:
|
Re: Its Mine the World Famous 67 Dragtruck
time to go bigger!
|
Re: Its Mine the World Famous 67 Dragtruck
5 Attachment(s)
Its UGLY! It looks like a rod bolt may have failed and started the carnage. The block may be usable but the crank,rods and pistons are junk. I have a new rotating assembly I just have to buy a block, pan, pump, balancer, flywheel,bigger hedders and bigger intake! I will be down for a while!
|
Re: Its Mine the World Famous 67 Dragtruck
Is that badly twisted rod (3rd pic) blackened from heat??? Oiling problem? No matter why, UGLYNESS for sure!
|
Re: Its Mine the World Famous 67 Dragtruck
It appears that I had a bearing failure on number 4 rod bearing that led to all the carnage. I don't think it was a rod bolt. The rest of the bearings in the motor look fine. I don't think nitrous was a factor at all.
|
Re: Its Mine the World Famous 67 Dragtruck
i hope i never have to make pics like that of my engine
|
Re: Its Mine the World Famous 67 Dragtruck
I can't complain I have had the same pistons rods and crank for 12 yrs!
|
Re: Its Mine the World Famous 67 Dragtruck
Quote:
|
Re: Its Mine the World Famous 67 Dragtruck
Quote:
|
Re: Its Mine the World Famous 67 Dragtruck
1 Attachment(s)
Quote:
So much has changed since "back in the day" when not only the speeds & low et's of today were unthinkable, the availability of parts "just a far off dream" and not only the strength but also radical combinations of engine, induction & transmissions that can also be run on the "street" is beyond the "best wish" coming true. Is this a dream or what??? Sorry to hear about the engine but if there is any consolation in any of this to be found it appears you not only got your "money's worth" but you also maxed out the "fun meter"..... good luck with the new "build". Gassers on the Street !!!!! |
Re: Its Mine the World Famous 67 Dragtruck
Quote:
fun meter huh? so others do know it exists:smoke: it's in one of the heils in my unit http://i136.photobucket.com/albums/q...4/DSC00147.jpg |
Re: Its Mine the World Famous 67 Dragtruck
Guy's I'm gonna be selling allot of stuff to fund the new bullet!
Top Gun Fogger Speedtech Plate 4 bay bottle warmer fluidampner ballancer external Balance Sfi Flywheel 4 speedtech 10lb bottles with gauges 71 truck parts Much more! |
Re: Its Mine the World Famous 67 Dragtruck
Quote:
Speaking of the "FUN METER" even though we are not going down the 1/4 mile anytime soon or doing much actual "building" we are still having fun collecting parts we need for our project .... so DJ, we'll be looking forward to seeing what you are going to offer for sale. |
Re: Its Mine the World Famous 67 Dragtruck
Pa.
There is a partial list in the above post! |
Re: Its Mine the World Famous 67 Dragtruck
I've never had anything last 12 years ! Cept' maybe a paint job .....
|
Re: Its Mine the World Famous 67 Dragtruck
Quote:
Tom |
Re: Its Mine the World Famous 67 Dragtruck
23 pages and the man finally visits!
call me you old buzzard! |
Re: Its Mine the World Famous 67 Dragtruck
Me needs more carnage pics.
Cylinder heads ok? Lets see some closeups of the healthy pistons. Got a pic of the crank? Block? |
Re: Its Mine the World Famous 67 Dragtruck
Sorry to hear about the motor.
I was wondering if you could send me a few pictures, or information on the rear suspension set up you have. I know it is trailing arms with coilovers, but how is it all set up? I am looking at buying a truck with leafs, that wont cut it for me, and yours looks to be quite a bit better than stock. PM me, or post it if you get a chance. Thanks, Jared |
Re: Its Mine the World Famous 67 Dragtruck
Its really pretty basic. The truck has stock trailing arms and it uses the longer qa1 coilovers behind the axle with an anti roll bar. It does have a stout 9 inch ford to take the abuse. Most of the pics I have are in this thread but I may have some on my other camera.
|
Re: Its Mine the World Famous 67 Dragtruck
|
Re: Its Mine the World Famous 67 Dragtruck
that truck sounded great , i now kindah know wat to expect when i put that amount of horsepower in the truck
i'm paying deeds performance at the moment for a twin turbo setup and some other stuff that will go on my big block , plans are to run it with an EFI on propane |
Re: Its Mine the World Famous 67 Dragtruck
Great thread(and long) and awesome truck!
|
Re: Its Mine the World Famous 67 Dragtruck
Quote:
|
All times are GMT -4. The time now is 07:35 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com