![]() |
Re: Our '66 Short Fleet Build
:fry:
^^^Joe (Hey Alan, do you know what time it is?- Go to bed!!!) |
Re: Our '66 Short Fleet Build
Quote:
Do you work nights and off during the days??:lol: |
Re: Our '66 Short Fleet Build
What role does Joe play?
|
Re: Our '66 Short Fleet Build
Quote:
Quote:
Quote:
Quote:
|
Re: Our '66 Short Fleet Build
Quote:
it says to put it on wet....we also had issues spraying it.....it says to use a 1.4mm-1.6mm gun tip, Scott had a 2.0mm and the DP was so thick it was hard to spray, we mixed 2:1 just like it said.....did you use something to thin it? We also didn't realize that with the DP401LF you are supposed to mix it then wait 30 minutes before spraying, don't have to do that with the DP402LF. I hope it doesn't affect the integrity of the protection... So I guess I'm going to get another quart and maybe try the DP402LF this time. man, there are some hard to get to places on these cabs :banghead: |
Re: Our '66 Short Fleet Build
Pics?:devil:
|
Re: Our '66 Short Fleet Build
Yeah. Pics?
|
Re: Our '66 Short Fleet Build
Quote:
|
Re: Our '66 Short Fleet Build
my nckname is Bo but some insist on calling me Bosephus so there you have it.As for the hank reference;probably closer to Hank Hill than to Hank williams jr!:lol::lol: Anyway,hope you get that paint figured out.
Thanks Hank!! don't get it twisted...i'm far from a pro :lol: i realize your name probably isn't Hank.....but i couldn't pass up the bosephus reference ;)[/QUOTE] |
Re: Our '66 Short Fleet Build
Quote:
Sorry Joe id just figured id write him back. ;) |
Re: Our '66 Short Fleet Build
Quote:
|
Re: Our '66 Short Fleet Build
Ok man thats cool, let us know. It was werid, it was like just pouring base/clear paint in a gun and trying to pray it without reducing and it was that bad. maybe bad quart.. i dont know.. i shook it really good too. Yeah let us know what you find out tomorrow, thanks
|
Re: Our '66 Short Fleet Build
:agree: Yeah,what he said ;)
|
Re: Our '66 Short Fleet Build
Ok, I'm back at work. I took pix but can't upload at work. I used DP90LF and DP402LF. I will tell you that the painter here said he reduced it down to something that would spray good. He used TLAR method "That looks about right". That's why it went so far. I strongly urge you to talk to the people you got your paint from and see what they tell you. I sprayed my bedsides with it reduced down and the part sat outside for awhile in the weather and didn't rust except where I didn't get good coverage.
|
Re: Our '66 Short Fleet Build
Get a MSDS sheet and instruction sheet on how to properly apply it. 2.0 tip is WAY to big unless you are shooting Rustdefender or similar product. Which side of Norman are you on? Give me a call and maybe I can stop by this weekend and see what is going on.
|
Re: Our '66 Short Fleet Build
Thanks Alan, i tried to get info from the place I got the paint.....they are an auto supply and don't seem to know much......I asked what I could use to thin it.....he told me the stuff that comes with it :rolleyes:
Thanks Mike. I got the MSDS and instructions, it said 1.4-1.6mm and 40-60 psi....the one thing we missed was that with the DP401LF activator you are supposed to mix it then wait 30 minutes before spraying, oops. i got another quart of the DP90LF and this time got the DP402LF activator instead, no wait with it. I live on the east-side of Norman, but the cab is in Tuttle at Scott's shop you think it would work better with the suggested 1.4-1.6mm tip? it didn't hardly want to flow through the 2.0mm, but maybe that was due to us not waiting 30 min to spray it.... |
Re: Our '66 Short Fleet Build
Quote:
|
Re: Our '66 Short Fleet Build
yeah, I've looked and PPG says not to reduce it, it will lower the corrosion protection.
I still have to talk to Scott, but hopefully he will be available tomorrow or Sunday. I will let you know when I find out. I assume you have used the dupont metal conditioner....does it have phosphoric acid in it? |
Re: Our '66 Short Fleet Build
Oh heck no! :lol:
So was it the wrong stuff? That's the reason why we used the 2.0 gun because it was so thick otherwise we would have used the 1.4.. |
Re: Our '66 Short Fleet Build
Quote:
|
Re: Our '66 Short Fleet Build
I got it at Palace auto supply.....they either don't have a clue or don't care to help......I'm kicking myself for not biting the bullet and buying the dupont gallon......now since i have started with the DP, think I need to finish with it. found more info saying you can mix 2 parts primer, 1 part activator, and 1/2 part reducer to make it a sealer.....but if it is being applied as primer, no reducer..... also found lots info that we didn't have to do the metal cleaner/conditioner, with the blast, could have just wiped it down with wax and grease remover then shot the dp on it :banghead:
I will be using dupont on the rest of the body and maybe the frame.....just due to the customer service |
Re: Our '66 Short Fleet Build
Joe if anybody can figure this out and keep on chuggin, it's you. hope everything works out for. you only got two months before I take some good pictures of you guys cruzin across the bridge into Memphis..:metal:
|
Re: Our '66 Short Fleet Build
:haha:
|
Re: Our '66 Short Fleet Build
The last mix you mentioned was roughly how the primer was mixed that my friend and I did on my truck. I mixed it 2:1:1.
Im no expert by any means, but Im thinking it would be reduced for sure. Is it a high build product?? |
Re: Our '66 Short Fleet Build
When are we gonna get some pics? Any action shots?
|
All times are GMT -4. The time now is 07:27 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com