Re: 64 C10 Stepside "Jaybird"
 

dont know how i missed your build, but im clicking through now... ima use the laptop for a big screen, phone screen too small for this one!!!

Re: 64 C10 Stepside "Jaybird"
 

So what are you fitting on the truck tonight Bret?

Really pleased for all of you.

The boys can start helping now as well.

Re: 64 C10 Stepside "Jaybird"
 

:metal::metal::metal::metal:

Re: 64 C10 Stepside "Jaybird"
 

Woo Hoo!

Re: 64 C10 Stepside "Jaybird"
 

Thank you guys for all the support. It has been exactly 1 year since I worked on Jaybird.

Martin there will be more regular updates. I am already making a parts order. I have got everything setup to paint just need to get my sandblasting setup and ready. Don't know about Clem's I need to make one of them. Mjminino wants me to go this year.

Pimpston Thank you for the comments.

Rian I did work on her. I put some more peel n' seal down but I ran out. Will stop by Lowe's on the way home from work to finish that up tonight. Tomorrow day off going to have a friend help me bring the bench seat home and put it in temporarily.

https://c1.staticflickr.com/8/7345/2...8e2df0db_b.jpg20160607_202426 by bjohnson388, on Flickr

https://c2.staticflickr.com/8/7378/2...c52270dc_b.jpg20160607_202412 by bjohnson388, on Flickr

Bret

Re: 64 C10 Stepside "Jaybird"
 

Man that looks good Bret.

Glad you have her home?

Re: 64 C10 Stepside "Jaybird"
 

Man I wish we lived closer to each other, both of our builds would be done by now just by seeing how we push each other through Facebook messages. Neither one of us would allow the other to be 'lazy'.

Re: 64 C10 Stepside "Jaybird"
 

Bret,
Glad to see our back on the build again after 1 year. Hopefully you will have it done by the fall so we can go to some shows ogether.

Re: 64 C10 Stepside "Jaybird"
 

Thank you Grizz. It seems like it was a long road.

This is true my friend.

Thanks John.


Well I know everybody likes photos of new truck parts. So here you go.

I mostly got stuff to help get me motivated to finish my doors and interior.

https://c8.staticflickr.com/8/7459/2...68b78aaa_b.jpgDSCN8926 by bjohnson388, on Flickr

https://c4.staticflickr.com/8/7288/2...7da4e6e8_b.jpgDSCN8927 by bjohnson388, on Flickr

https://c8.staticflickr.com/8/7254/2...d930ae83_b.jpgDSCN8928 by bjohnson388, on Flickr

New clip on door seals I got from GMC Pauls. They are made by Precision.

https://c3.staticflickr.com/8/7443/2...ac80c2d8_b.jpgDSCN8932 by bjohnson388, on Flickr

And why not a picture of what is keeping me away from the truck at the moment.

https://c8.staticflickr.com/8/7459/2...13ef9fb6_b.jpgDSCN8937 by bjohnson388, on Flickr

https://c7.staticflickr.com/8/7676/2...d26daf1c_b.jpgDSCN8938 by bjohnson388, on Flickr

https://c4.staticflickr.com/8/7471/2...6b01e2aa_b.jpgDSCN8939 by bjohnson388, on Flickr

Bret

Re: 64 C10 Stepside "Jaybird"
 

Without the shed that rest of the work cannot progress.

But we all know this, so keep at it, and of course keep sharing the progress.

Good going Bret.

Re: 64 C10 Stepside "Jaybird"
 

I'm not sure where I've been but I'm liking what I'm seeing. Cool truck.

Re: 64 C10 Stepside "Jaybird"
 

Thanks Rian for the encouragement. We all need a push from each other.

Thank you so much.

So I got my rag joint today from Rockauto I have to say I am very impressed for what it cost.

https://c8.staticflickr.com/8/7371/2...529d044a_b.jpg20160616_161500 by bjohnson388, on Flickr

https://c7.staticflickr.com/8/7432/2...2d06eca2_b.jpg20160616_161506 by bjohnson388, on Flickr

The wife and I painted 3 sides of the shed today before the heat beat us. I bought some Sherwin Williams paint and I am very impressed with how well it laid on.

https://c1.staticflickr.com/8/7281/2...5d5f589d_b.jpg20160616_134433 by bjohnson388, on Flickr

https://c6.staticflickr.com/8/7099/2...d8aa6c23_b.jpg20160616_155859 by bjohnson388, on Flickr

https://c5.staticflickr.com/8/7381/2...9cff186a_b.jpg20160616_155911 by bjohnson388, on Flickr

Temp inside the shed is at least cooler than outside. With a fan blowing on you it will definitely be workable.

https://c1.staticflickr.com/8/7437/2...c81eef16_b.jpg20160616_155812 by bjohnson388, on Flickr

Bret

Re: 64 C10 Stepside "Jaybird"
 

:metal:

Re: 64 C10 Stepside "Jaybird"
 

Put one of my new push on door seals on today and then test fitted the door to see how it fit. The seal went on perfect.

https://c2.staticflickr.com/8/7398/2...65a27177_b.jpg20160619_191537 by bjohnson388, on Flickr

https://c3.staticflickr.com/8/7320/2...ea8f0f67_b.jpg20160619_191545 by bjohnson388, on Flickr

https://c2.staticflickr.com/8/7288/2...334e0f54_b.jpg20160619_191623 by bjohnson388, on Flickr

https://c8.staticflickr.com/8/7600/2...39e68d70_b.jpg20160619_191642 by bjohnson388, on Flickr

I've got a lot of work to do on this fender. Not only the rust but it was hit in the fender well and buckled and pulled this back edge in.

https://c6.staticflickr.com/8/7038/2...d43fb46c_b.jpg20160619_205423 by bjohnson388, on Flickr

All my other gaps look pretty good not perfect but close enough for me.

https://c2.staticflickr.com/8/7654/2...5e91e5f1_b.jpg20160619_205455 by bjohnson388, on Flickr

https://c2.staticflickr.com/8/7500/2...3843675f_b.jpg20160619_205459 by bjohnson388, on Flickr

https://c1.staticflickr.com/8/7641/2...187b0cef_b.jpg20160619_205702 by bjohnson388, on Flickr

Hope to start on the door this weekend. I have all the parts to finish out so that is my motivation to get the doors done.

Bret

Re: 64 C10 Stepside "Jaybird"
 

:metal:

Re: 64 C10 Stepside "Jaybird"
 

gaps look pretty good to me, as good or better than when they rolled off the assembly line. that would be a tough fix on the stretched fender. can you get another from salvage somewhere?

love the wheel tire combo… gonna be a beautiful truck.

Re: 64 C10 Stepside "Jaybird"
 

I have some updates to share. Been working on the doors and painted the grille and white part of the grille support. Also painted a bunch of interior parts.


Took you advice Clem and got another passenger fender. Came from a forum member. Customcab66. This is a fantastic fender had 2 pinholes in the bottom corner and a couple of small dents in the front. And the best part it was FREE!! Thanks again buddy I owe you.

https://c4.staticflickr.com/9/8899/2...4ff80056_b.jpg20160715_133437 by bjohnson388, on Flickr


https://c8.staticflickr.com/9/8796/2...c7a4e340_b.jpg20160715_135850 by bjohnson388, on Flickr

https://c7.staticflickr.com/8/7299/2...12b54388_b.jpg20160715_141616 by bjohnson388, on Flickr

https://c1.staticflickr.com/8/7492/2...64153dcb_b.jpg20160715_143411 by bjohnson388, on Flickr

Next up fixed the rust on bottom corner of passenger door and put some metal 2 metal over the smile face after I welded all the holes some one left after pulling the dent. Also some metal 2 metal on the inside bottom edge that was a beat up. No rust just ugly.

https://c2.staticflickr.com/8/7779/2...381fb49d_b.jpg20160716_123809 by bjohnson388, on Flickr

https://c1.staticflickr.com/9/8488/2...20ffe73e_b.jpg20160724_165420 by bjohnson388, on Flickr

https://c8.staticflickr.com/9/8816/2...b5188e29_b.jpg20160724_091050 by bjohnson388, on Flickr

https://c8.staticflickr.com/9/8878/2...b99267c2_b.jpg20160726_094953 by bjohnson388, on Flickr

https://c8.staticflickr.com/9/8710/2...376bea06_b.jpg20160725_082421 by bjohnson388, on Flickr

https://c3.staticflickr.com/9/8202/2...bf8ef829_b.jpg20160725_112540 by bjohnson388, on Flickr

Painting the grille and the grille support.

https://c6.staticflickr.com/8/7538/2...f8360459_b.jpg20160726_105009 by bjohnson388, on Flickr

https://c8.staticflickr.com/9/8361/2...4592fe79_b.jpg20160726_105020 by bjohnson388, on Flickr

Little bit of bodywork.

https://c1.staticflickr.com/9/8697/2...81fe10c3_b.jpg20160726_132822 by bjohnson388, on Flickr

Primed and painted the backsides with rattle can.

https://c3.staticflickr.com/9/8705/2...ed04544a_b.jpg20160726_151124 by bjohnson388, on Flickr

https://c1.staticflickr.com/9/8569/2...fa83a1b5_b.jpg20160727_133012 by bjohnson388, on Flickr

https://c1.staticflickr.com/9/8714/2...b9193bc5_b.jpg20160727_142323 by bjohnson388, on Flickr

https://c2.staticflickr.com/9/8260/2...491b2ab5_b.jpg20160727_195917 by bjohnson388, on Flickr

The headlight brackets actually have Chev stamped on them. Very cool.

https://c6.staticflickr.com/9/8378/2...a6ac0e6d_b.jpg20160727_195605 by bjohnson388, on Flickr

Made some patches for inside driver door. Still not finished with it.

https://c2.staticflickr.com/8/7725/2...832463df_b.jpgIMG_20160729_205806 by bjohnson388, on Flickr

Also a patch for the outside corner.

https://c2.staticflickr.com/9/8783/2...a0c15242_b.jpg20160801_160515 by bjohnson388, on Flickr

Made a junkyard run and found some door checks, heater parts, fuel line, and some rad covers Rian(Grizz1963)

https://c6.staticflickr.com/9/8639/2...d39bce6e_b.jpg20160728_134132 by bjohnson388, on Flickr

Buddy of mine gave me these for free as well.

https://c4.staticflickr.com/9/8581/2...f4111ee7_b.jpg20160728_175646 by bjohnson388, on Flickr

Interior parts I painted this morning.

https://c1.staticflickr.com/9/8126/2...cee3cf9b_b.jpgIMG_20160801_105334 by bjohnson388, on Flickr

https://c1.staticflickr.com/8/7568/2...d56ac64c_b.jpg20160801_104921 by bjohnson388, on Flickr

https://c2.staticflickr.com/9/8825/2...227877ab_b.jpg20160801_104939 by bjohnson388, on Flickr


And that's it back to the daily grind tomorrow. It was a fantastic week. A little on the hot side but I kept cool under my shade and big fan blowing on me. I can't wait for some cooler weather. My basic recipe was painting and bodywork in the morning before it got hot and then stripping and welding and grinding after lunch when it was too hot to paint. The passenger door need to be blocked one more time and might be ready for paint. I have another parts order coming tomorrow. Have the patch and brace for the driver fender so I can get it repaired next and some new hardware for putting the grille back together, the Chevrolet decals for the grille, and some more misc interior parts. Hope to get the column all back together this week and installed.

Bret

Re: 64 C10 Stepside "Jaybird"
 

Looking really good Bret. nice progress!!

Re: 64 C10 Stepside "Jaybird"
 

Busy week! Looking great! Been following along on IG and diggin' the progress...:metal:

Re: 64 C10 Stepside "Jaybird"
 

Nice progress Bret . Did you use the Honda seals ? Good call on the replacement fender , even better that it was free . There are some good guys on this forum . Keep up the good work and you'll be driving it soon .

Re: 64 C10 Stepside "Jaybird"
 

Thank You.

Thanks Don. Appreciate all your support.

Thanks Martin. I did not use the Honda seals. I used the new clip on original kind. I got them from GMC Paul's. They fit perfect. Here is the link. The part# is 17880392

Scroll about half way down the page. http://www.gmcpaulstruckparts.com/60...ther_strip.htm

I know a couple of other vendors are selling these too. They are made by Precision.

Bret

Re: 64 C10 Stepside "Jaybird"
 

Everything looks great.

Re: 64 C10 Stepside "Jaybird"
 

Awsome build! Very nice work!

Re: 64 C10 Stepside "Jaybird"
 

Thanks guys for the comments. I got my column all put back together and installed in the truck.

I took a pic when we first got her with my youngest son behind the wheel. Well here is the same pic 4 years later.

https://c6.staticflickr.com/9/8472/2...e0a50dfd_b.jpg20160803_202018 by bjohnson388, on Flickr

https://c7.staticflickr.com/9/8838/2...e052b4c0_b.jpgIMG_20160803_213911 by bjohnson388, on Flickr

https://c3.staticflickr.com/9/8682/2...e236a5d0_b.jpgIMG_20160803_213928 by bjohnson388, on Flickr

https://c8.staticflickr.com/9/8582/2...6ecd8760_b.jpgIMG_20160803_214114 by bjohnson388, on Flickr

https://c7.staticflickr.com/9/8505/2...84958db8_b.jpgIMG_20160803_214133 by bjohnson388, on Flickr

https://c4.staticflickr.com/9/8625/2...35ee87b5_b.jpg20160803_201654 by bjohnson388, on Flickr

https://c2.staticflickr.com/9/8575/2...706e7651_b.jpg20160803_201700 by bjohnson388, on Flickr

It does have too much of a gap between the steering wheel and the column but I have adjust the outer column up as far is it will go. I think this is caused by the rag joint I bought. It is about 1/8" thicker than the stock one.
https://c2.staticflickr.com/9/8847/2...ca694aeb_b.jpg20160803_213007 by bjohnson388, on Flickr

https://c6.staticflickr.com/9/8404/2...bfcde26d_b.jpg20160803_213105 by bjohnson388, on Flickr

Side project. My oldest son got a bunch of vintage license plates for his birthday so I am making some frames to mount them and hang up in his room.

https://c7.staticflickr.com/9/8672/2...a6ee029a_b.jpgIMG_20160804_115038 by bjohnson388, on Flickr

Re: 64 C10 Stepside "Jaybird"
 

your prep and paint is as good as it gets. that interior is killer.
nice work my man.

kim and i especially liked the time warp with your youngest at the wheel and the changes before and after.