Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
One more
|
Re: What did you do to your truck today.The 3rd chapter
Nice work. Easy day for me. Replaced headlamps with Sylvania Silverstar sealed beams.
Changed my TH350 speedo driven gear from 20-tooth to a 24-tooth and verified the speedo with a GPS phone app - right on target. 5% per tooth rule of thumb worked for me as my speedo was reading 20% higher than GPS MPH. Added a spare tire carrier from LMC and bolted in the spare tire. Added a kill switch to the HEI tach lead and tested a few times - works great. |
Re: What did you do to your truck today.The 3rd chapter
I upgraded to led lights all round. Besides reverse or headlights.
https://youtu.be/nmTLkR-0obk |
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Found the exhaust leak 😄
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
3 Attachment(s)
Painted the visors, stuff works great! Will do my seat next. Changed my kinked fuel line that was long overdue.
|
Re: What did you do to your truck today.The 3rd chapter
2 Attachment(s)
I’ve got the new (old) manifold cleaned up and installed. Also new carb and distributor.
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Quote:
I cleaned up a set last week for my daughters 68 step also. Wire brushed and wiped down with brake cleaner then painted black caliper paint.:chevy: |
Re: What did you do to your truck today.The 3rd chapter
4 Attachment(s)
Painted the rear part of the cab. Paint area was a little too cool when I turned on the exhaust fan . I'm using a large ezup with sides . I got a couple minor sags but I got it in the sun now . Debating on whether I will fix them or just leave them. That's the price you pay for using single stage paint.
Not going for show a truck just a real nice driver. That you wont mind taking to a show |
Re: What did you do to your truck today.The 3rd chapter
No photos but got the upper rear shock mounts off and two of the four rivets in the rear most frame cross member out. I’m prepping to paint the rear of the frame and know I’ll be re locating the rear shocks so those parts gotta go.
Guess the truck was stuck at least once and someone connected the chain to that rear cross member and pulled a hickey in it. Buddy of mine has a spare frame so I’m gonna get a straight one from him but figured the frame would clean up better with the old cross member out. Hope I’m blasting the rear frame section this weekend. |
Re: What did you do to your truck today.The 3rd chapter
4 Attachment(s)
Got the Delco-Pleasure lift gauge mounted and air up the air tank on the ramp truck then took it for a ride.:chevy:
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Lots of people would not call this progress but I know this crowd appreciates the level of time and effort to get to this point.
Started with just pulling the drive shaft and removing the long rear brake line. That went so well I decided to cut the springs out. Then that lead to cutting the rear end u bolts. What the heck, wonder if soaking the trailing arm bolts for weeks has paid off. Now all I have to do is clean it all up. Got rust encapsulator and frame paint just need time and a pile of parts. |
Re: What did you do to your truck today.The 3rd chapter
Installed a new master cylinder. New NAPA calipers and hoses. Powerstop drilled & slotted rotors and pads. Stops great now. Pedal doesn’t sink to the floor at a stop light.
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
3 Attachment(s)
Working on the power steering this week , This is a 67 short bed frame that wasn't dimpled for a power steering gear , at the bottom left of the picture you can see where I modified the frame just enough to fit the box without going crazy with heat and a BFH to make it fit , It really doesn't take much to have it fit and still look clean . Just waiting on the new pump and pulleys to show up and chase down some stainless steel lines . :chevy:
|
Re: What did you do to your truck today.The 3rd chapter
2 Attachment(s)
Took it to my first judged show and received best of show for my class.
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
2 Attachment(s)
Got my power steering pump and stainless lines in today , One more bite off the elephant . :chevy:
|
Re: What did you do to your truck today.The 3rd chapter
3 Attachment(s)
While my paint and body guy has the bed, doors and front clip, I was able to get the rear section of the K10 shorty’s frame pressure washed, cleaned and painted. Also got the radiator core support painted too.
|
Re: What did you do to your truck today.The 3rd chapter
5 Attachment(s)
Got the cab bolts all loose and ready to pick it up to swap it over to the new frame. Front clip is off also. :chevy:
|
Re: What did you do to your truck today.The 3rd chapter
Just received my Carb back from the Rebuilder, Looks good..
https://www.customrebuiltcarbs.com https://cache.nebula.phx3.secureserv...0-4305fec65b04 |
Re: What did you do to your truck today.The 3rd chapter
2 Attachment(s)
My granddaughter will be 16 I'm a little over a year. I went out to the warehouse and picked up her truck and took it back to the shop so we could start getting it ready for her to drive. Hugger Orange, factory air, with less than 60,000 miles
We bought it from the original owners son. |
Re: What did you do to your truck today.The 3rd chapter
That's that Cali truck isn't it OL?
|
Re: What did you do to your truck today.The 3rd chapter
Arizona
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
2 Attachment(s)
It looks like it will be a while before we will get started on this Blazer, so we loaded it up to take to storage.
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
I got the final paint on my transmission and basecoat on the engine. The momentum is slowly building...
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
Pulled mine out and checked the fluids then took a drive down to put some fresh gas in it. Most people park their trucks for the winter. I parked mine for the summer. Got too dang hot to drive without A/C here in Texas.
|
Re: What did you do to your truck today.The 3rd chapter
2 Attachment(s)
slowly getting all the wires/fuel lines cleaned up on the frame rails so I can get the new headers/exhaust on and done with.
|
Re: What did you do to your truck today.The 3rd chapter
3 Attachment(s)
The C20 Snip-Snip.
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Finally got the encapsulator and top coat on my trailing arms. Should have the rear frame section done soon as well. Time to order some parts!
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
We've about finished up this wood veneer project. Slow progress with the cooler weather out here increasing drying times of the finish coats. Final sanding shown here..
|
Re: What did you do to your truck today.The 3rd chapter
5 Attachment(s)
so here is the past couple of weeks. Got carb back installed, springs bushings and shocks up front done, pull seat out to find fuel sender has had it.... ordered a new tank!
|
Re: What did you do to your truck today.The 3rd chapter
4 Attachment(s)
Since the seat was out and waiting on parts for fuel system... figured I would freshen up my gauges..... short a couple of LEDs and have some socket issues so more to come there but I think the general cleaning came out nicely.
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
test fit the speed engendering long tube headers :metal:
|
Re: What did you do to your truck today.The 3rd chapter
4 Attachment(s)
Late to post, but I dropped the driveline in Sunday and set the radiator and fans Monday. Getting it done!
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
finish dressing up the gauge cluster and tried it out. Not going to fully install it until I get my gas tank in and know for sure that putting the ground will reset the gas gauge. I think it looks awesome I love the light
|
All times are GMT -4. The time now is 10:04 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com