![]() |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
finally finished the blazer....
almost a waste of a kit..lol used just the 3/4's, part of the frame, and the int tub. cab and front clip are from the revell hot rod truck, seats from a '99 silverado, and the big block is built from parts from the spare box... prob be the last big 4x4 build for awhile, once again our dollar is in the toilet, and my resin caster just doubled(!) his shipping rates again...a $1.25 t-case is now $22.50 delivered to my door...nope, not likely....:waah: wife found a few more cars at a garage sale, plus i got a tow truck and another '66 sub in the stash. i do have 2 t-cases left, no more big tires, so thinking a stock 4by build on the sub....maybe time to brush up on a few cars as well.... couple more vettes, a '56 and a blah-ferrari, euro trash.... Attachment 1849995 Attachment 1849996Attachment 1849997Attachment 1849999Attachment 1850000 |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
|
Re: '64 chevy 2wd to 4wd
nice job on the build ups. Wanted to ask you what are you using for glue and paints now ? I haven't put a kit together for decades now and just curious what stuff is good to buy now... Thanks
|
Re: '64 chevy 2wd to 4wd
Blazer is looking great!! How's your truck coming?
|
Re: '64 chevy 2wd to 4wd
4 Attachment(s)
Quote:
actually i use pretty much whatever i can find if it's the color i like. my '66 panel i used paint from the '80's!.... for small details i just use Testors, Humbrol, and Model Master mostly. Tamiya paint is nice, but expensive up here... for glueing i again use Testors and dollar store instant super glue. White glue is great for clear parts, dries clear if you get it where you should'nt. i do have an airbrush, but being lazy (cleaning...) i rarely drag it out anymore, if i can find the color in a spray bomb, i'll go that route. i do have an affinity for Krylon flat or satin black for chassis 's. i have never had a paint job or chassis go wrong using Krylon. and if it's real old paint ('66 panel) instead of pushing it threw my airbrush, i'll use this detail gun i got.... pretty hard to go wrong with most materials out there now, i remember building models almost 50 yrs ago with c**p glue and lousy paint Attachment 1851933 have'nt made it to the shop lately Dale, but 2 of 4 rockers we're just going to replace them, other 2 are good. been buying and restoring parts for it though.. last 10 yrs or so i been running a billet grille.... Attachment 1851934 just for a change-up, i dragged out my stock grille, fixed a crack in it and shot some new paint on it...when the truck gets painted, i'll get buddy to paint the middle band same as the truck...green... just and i mean just painted, have'nt even pulled the masking off the back yet.. Attachment 1851935Attachment 1851936 |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
it's fun spending money....especially on yer truck...:metal::metal:
not new, but better than mine 454 emblems, chev letters for the tailgate and the green box is window fuzzy's for all 4 drs Attachment 1851941 some new cab marker lights and tailgate lights. new Custom Deluxe emblems. my son bought me the wiper blades, steering wheel cover and a new back-up lite to replace a non working one for christmas Attachment 1851942 new window runs and door seals for all 4 drs. also got new winda regulators for the fr doors. them objects wrapped in the newspaper is new drip rails (4) Attachment 1851943Attachment 1851944 got 4 new dr handles, dr bumpers, fuel tank bumpers, tailgate bumpers and new dr locks on order. everything else is cleaning up or restoring real nice... check out what else my son made for me. i only have fuzzy dice ever hanging on my rearview mirror, and the dots keep falling off the current set, so son made these dice out of blocks of balsa wood, light weight, last forever, and the dots won't fall off...i think he did a darn fine job, even got them the color of the crew Attachment 1851945 |
Re: '64 chevy 2wd to 4wd
It's gonna look great
|
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
yup, i hope so Dale, cause right now it looks like poo...lol
new front rockers to go in, plus the drivers cab corner, found some bubbles on it pass rocker is better shape than the drivers, but pass side of the body sure needed a lot of massaging, looking much straiter and less wavy...also started on the dents by the rear winda Attachment 1853092Attachment 1853093Attachment 1853091 drivers is a little more rougher, need a bit of front floor as well....:waah: Attachment 1853095 drivers side body is much better than the pass Attachment 1853094 |
Re: '64 chevy 2wd to 4wd
A lot of work.. makes me jealous. I'll get to mine someday
|
Re: '64 chevy 2wd to 4wd
4 Attachment(s)
ya, a little bit of work, but it's coming along nicely. one of the guys i work with is friends with one of the body guys doing the sheetmetal work on my crew. he was done there the other day and showed me a couple pics on his phone, front inner and outer rocker are all new and looking good, as is the pass rocker, cab corner is cut out but the new one is not in yet. only dent i could see left was in the roof. i'll prob go down there next sat and drop off my grille and take some pics...
while waiting for it i dragged out this sub i've had since last yr... Attachment 1864715 as parts are waaay to expensive right now, this will be pretty much box stock. i have one 205 t-case left, so it will be 4by. dug threw the parts box, came up wit these goodyear tires that should look mostly period correct with the steelies and hubcaps. hood is not the color, just off my 1 ton for mock-up... Attachment 1864716Attachment 1864717 instead of just another sb, going to re-hash this '60 strait 6 into more of a '66 strait six. had to scrounge up some axles, will prob just use the diffs and make axle tubes Attachment 1864718 depending on when my crew gets back, could be a fast build (lol) or a slow build... |
Re: '64 chevy 2wd to 4wd
Looking forward of seeing pics of the crew. I may be selling mine. The suburban will look cool.
|
Re: '64 chevy 2wd to 4wd
3 Attachment(s)
a little more on the sub...
fr axle and leafs are in, had to cut the 2wd out of the way...rr axle is almost ready to go in.. Attachment 1865847Attachment 1865848Attachment 1865849 |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
how come might be selling your crew Dale?
i'm starting to get stoked about mine... some sheet metal fitted in...all needs final welding new inner and outer fr pass rocker, there was a soft spot on the rear rocker, so it got replaced, as did the cab corner. body is lookin' waaay straiter now, you can see what a mess it was and how it was all wavy Attachment 1865850Attachment 1865851 drivers is looking much nicer too. fr inner and outer rockers as well as a piece of floor. rear rocker was the same as the pass side so said the hay with it and replaced the outer, and the cab corner. have'nt seen the bottom of the cab this straight in many yrs....nothing like say Chromaholic's masterpiece, but good enough to haul the camper and atv trailer with..:lol: Attachment 1865852Attachment 1865853Attachment 1865854 |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
went and bought a buffing wheel for my bench grinder.....liking the results on my crewcab steps...
Attachment 1867998Attachment 1867999 most of the sub chassis is done....going low-buck bare bones base model on this one....no two tone or anything upscale and fancy... Attachment 1868003 Attachment 1868001Attachment 1868002 |
Re: '64 chevy 2wd to 4wd
4 Attachment(s)
most of the interior....blew my base model theme on the seats....i did them just brown orig, but they looked pretty plain, so i got a little carried away on them...
thinking the spare tire might migrate to the front bumper...it looks cool on there Attachment 1868004Attachment 1868005Attachment 1868006Attachment 1868007 |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
getting closer...
Attachment 1870391Attachment 1870392 ....so is my crew....should be in primer by friday, blocked a couple times, then splash some color...:metal: Attachment 1870393Attachment 1870394 watched my body guy re-do this '84 K20 before my crew, rockers, corners, etc. he has about 40 musclecars, classics, rods, vettes, but no squares till this. now that he's got one and it's done, i'm trying to pry it off him.....good thing with him is, usually everything eventually has a price...:lol: my son gets his license next yr and this is pretty much what we've been looking for (a done perfect body!) i'll just lay it on him real thick 'bout my boys first ride...lol Attachment 1870395 |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
Attachment 1871423
Attachment 1871424Attachment 1871425 Attachment 1871426Attachment 1871427 color is krylon river rock (?river rock?) |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
|
Re: '64 chevy 2wd to 4wd
3 Attachment(s)
Suburban looks great. I love the color and spare on the front. Crew looks like they're doing a nice job. Keep us updated. I might sell the dually because of health issues and my friends gave me an "Overhaulin" on my 72 K20. They towed it away took the new frame and parts truck. Two weeks later I'm driving it. So I'm going to thin the herd a bit
|
Re: '64 chevy 2wd to 4wd
looks good Dale, just need some paint now...:metal:
is this what's left of "Ol Blue K20"? |
Re: '64 chevy 2wd to 4wd
1 Attachment(s)
That's it they swapped all of Blues diffs eand all the running gear to the new frame. A local trans shop built a new trans the old one shattered in the accident.
|
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
ouch! looks like a hard hit...some kind of pole or something?
did not know about an accident Dale, that's too bad at least part of Ol Blue lives on...:lol: don't have any model pics at the moment, but i did go on a 200 mile trek today...with a couple hrs ferry ride thrown in as well. figures...no snow at all this winter so far...till today...(naturally...) Attachment 1874512 after driving for an hr still in it... Attachment 1874513 lots of spun out cars and fender benders everywhere today, including this one right in front of me. i turn left at these lights and go down a pretty steep hill to the ferry terminal at the bottom...the sedan had a hard time getting going from a stop at the lights, was spinning his tires like crazy but could'nt get out of the way fast enough for the suv sliding down the hill....t-bone right in front of me.....sedan should have had winters or at least all seasons on, could have got out of the way then... Attachment 1874514 that's my boat... Attachment 1874515Attachment 1874516 |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
weather was just as bad on the water. went upstairs to get some pics but the outer decks were all closed because "the snow makes them slippery...."
as you can see there is jack for snow on the decks, but it's frikkin cold anyways, low 20's with wind blowing 30-50 mph and visibilty was mostly zero Attachment 1874517 so i went back to my truck (i got a "window" seat) and tried to take some pics of the waterfalls and cliffs on the gulf islands...again vis was pretty much nothing so i played with my thumbs for an hour...:lol: Attachment 1874518Attachment 1874519Attachment 1874520Attachment 1874521 |
Re: '64 chevy 2wd to 4wd
3 Attachment(s)
and here's why i spent 6 1/2 hrs of my day off driving in filthy weather.....
Attachment 1874522 been wanting a CUCV brush guard for a long time, their a little more rare up here north of the border, and this one is pretty mint. only wanted the guard, but had to take it all, for $250. the d-shackle mounts i will prob use. i have a 5/16 thick angle plate across the front of my frame for my front trailer hitch receiver that i'll bolt them to cause i will be using my chrome bumper and i'm not cutting big square holes in it for them... also got the stainless package for my box yesterday, bed sides, t-gate protector, and bulkhead protector Attachment 1874523 re-did my door panels... Attachment 1874524 |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
heck ya!
primed it up then rolled it outside, and of course we just had to get our first snow of the season..... solid & strait finally Attachment 1875609Attachment 1875610Attachment 1875611Attachment 1875612Attachment 1875613 |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
was never crazy how the cucv brush guards have just a piece of strap steel on the front between the mounts. there always bent.
my 9" lights would not fit anywhere on the cucv, so i cut out the middle bar carefully, drilled some holes for my lights and welded it across the piece of strap steel. the guard feels way more solid and less "bendy" now, and picks up the "loop" design nicely i think Attachment 1875616Attachment 1875617 some eye candy at my buddy's body shop.. Attachment 1875619Attachment 1875620Attachment 1875621 |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
|
Re: '64 chevy 2wd to 4wd
Trucks looking good. All the eye candy is overed in powdered sugar.....lol
|
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
ya, but it's melting fast....till tomorrow, supposed to get another couple inches :waah:...then sun for a few days :metal:
last sat we rolled my crew back into the shop and took out the winda's and popped off the door handles...little more sanding and it's good to go.... finished my cucv guard. i left as much as the military paint on as i could- good stuff whatever it is, then red oxide'd it and painted it with some satin epoxy paint...but it's not very satin-e i think.....hopefully it'll keep the rust at bay for awhile Attachment 1877016Attachment 1877017 buddy's K20 we were looking at is kinda a no-go. his friend served in Afghanistan, 5/4 ("trailer park boyz"), that's what the 5/4 on the front fender of his K20 stands for, as well as a CF badge and flag. his intention is to give it to his buddy- for free. so i threw him the cucv bumper and d-shackles that i just picked up. he really wanted the guard, but no way :lol: so his other friend has this 1/2 ton for sale. one yr newer than mine, '86, 350/700r4, tilt, a/c, new dashpad, newer paint, everything works. going to look at it this sat, son likes it Attachment 1877018Attachment 1877023 and ya, it's not a chebby, but i got bored and am putting this TBD Devastator together. wife bought me 6 small planes the other yr....finally doing something with them... the finish is from Torpedo 5 (VT-5) from the USS Yorktown (CV-5) just before WW2 once it's all together and painted i'll hit it with some dull-cote to tame down the brightness of the paint Attachment 1877024 |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
was moving some stuff and found 2 un-opened packs of "metal siding" plastic sheet....hmmm...what can i do wit it....(ya, this ain't a chebby either...lol)
back in the '70's my folks had a 22' Prowler travel trailer, sooo.... only prob is i have to try go completely off memory, no pics of it (house fire) found a pic of one online that looks very similar to what my dad owned Attachment 1877044 breaking completely of my tradition of "eyeball engineering", i actually drew up a quick template for this one and a frame/plumbing layout Attachment 1877045 cut up some pieces.... Attachment 1877046 ...and see how it fits Attachment 1877047Attachment 1877048 |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
snow day today...did some work on the prowler to pass the time. glue has just been flyin'..lol
Attachment 1877391 soon as i stuck my pieces together it was quite obvious the winda's were too large, except the rear one which was too small. Attachment 1877392Attachment 1877393 not having any more siding left i had to scab in some pieces....and opened up the rear one some Attachment 1877394Attachment 1877395 |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
Attachment 1877397Attachment 1877398
got some work done on the frame Attachment 1877399Attachment 1877400 one more inner fender to make then can start the int Attachment 1877401 |
Re: '64 chevy 2wd to 4wd
Goodness you are busy. I was in the hospital so I have fallen behind.....I like the grill guard, it looks great with the lights mounted. I like the K10, it looks like it's been loved. I always enjoy you're model building. The prowler is going to be cool.
|
Re: '64 chevy 2wd to 4wd
nice assortment of toy(s), i mean, project(s) =)
|
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
thanks guys!
hospital Dale? are you alright? TBD devastator Attachment 1878975Attachment 1878976Attachment 1878977Attachment 1878978Attachment 1878979 |
Re: '64 chevy 2wd to 4wd
4 Attachment(s)
a little more Prowler work.
was digging threw spare junk and found this grey thing, so i added some styrene to it and it will become the rooftop a/c unit. installed the other inner fender, made a door. found a panel with 3 sq door handles in the junk pile, wish i had 1 more for all the storage boxes, and made a flip down step under the door Attachment 1878984Attachment 1878985 got the bumper on and a spare tire...could'nt belive it, but i also found a "vinyl"spare tire cover in my junk pile...where it came from is beyond me, but i'll take it...lol started a jack, got the tailwheel from an airplane that will go on it once i got the length. have'nt found any scale propane tanks, so i started scratching some out of exacto blade containers, round glass from airplane bomber turrets, and some styrene. i'll wait till there done and see how they turn out, if they look like cr*p i'll make a tank cover... and my ever-so-smart wifey found a place that makes 1/25 scale doll house stuff...so i got a fridge, sink, stove, bathroom set up and cabinets coming, and cheap, less than 30 clams...:metal: Attachment 1878986Attachment 1878987 |
Re: '64 chevy 2wd to 4wd
took me a couple days, but i just read all 37 pages of this. wow
you put more attention into these models than a lot of people put into fullsize trucks lol. i tried my hand at modeling a couple years ago, but pretty much box stock. id like to build something that resembles my first truck (ferd) but it would involve splicing a couple trucks (cabs) together and im not sure my skill level will agree with that. on that note, would you say there is always a big difference between 1/24 and 1/25? or does it vary model to model? the easier option for getting back into it would be doing dads first car, 76 nova- still has it. but it has a excessively striped paint job that would be a real bear to recreate. |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
wow, you actually read all 37 pages...lol
you know, if you want to build models, you picked a golden time in modeling, manufactors have been coming out with some cool new releases lately, and the aftermarket/resin casting parts business is exploding. you can get just about anything or any part for your models now a days. waaay easier to detail up or modify kits today than 20-40 yrs ago here's a pretty good list of aftermarket sellers.. http://www.modelcarsmag.com/forums/t...ket-directory/ like i say, don't be afraid to try a funky paint job, you can even get stripe and flame masks for your models, like these ones from the Lazy Modeler Attachment 1882481 truly is a good time to be building...you like fords?, Model King has come out with a whole line of '69-'72 fords recently Attachment 1882484Attachment 1882483Attachment 1882482Attachment 1882485 |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
if i was going to build a ford, this would be my choice...
Attachment 1882495 if your looking for a '70's era ford, pickings are kinda slim, AMT makes one, but unfortunately they picked the super rare and super ugly long wheelbase camper special. i have seen a couple of these trucks where guys move the rear wheels up to where they should be and it looks much better... Attachment 1882497 and there is some '80's and '90's, lots of versions, most are just re-boxed, or have new decals added, but there all basically the same. there's also the "melted brick" fords from the mid '90's that Revell puts out Attachment 1882498Attachment 1882500Attachment 1882501 and of course there's the super expensive, but super nice F350 Super Duty that Meng Models is cranking out http://www.internetmodeler.com/scale...uty-Pickup.php if you do buy a Meng, watch out, they also make a 1/35 version of the s.d. and it's much cheaper than the 1/24 kit speaking of, i reg swap 1/24 and 1/25 parts. it's always a cr*pshoot on fitment, what's 1/24 for revell, may be diff than 1/24 amt, sometimes 1/24 from diff man. will fit right into another makers 1/25....like i say, some fit, quite often some mods are needed but mostly, you need to build chevy's...:lol::metal: |
Re: '64 chevy 2wd to 4wd
1 Attachment(s)
The truck I've got is a 95 extended cab flareside, so Im thinking I would combine the amt regular cab flareside and the extended cab f350. But that involves getting the 92 front on the 91 cab. If I get them both next to each other and they dont look like a good match, I'll just build them both the way the box intended lol.
And the Nova isnt necessarily complicated, just a lot of narrow stripes Attachment 1882687 |
All times are GMT -4. The time now is 07:49 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com