![]() |
Re: Ok Boys and Girls it's Storytime
|
Re: Ok Boys and Girls it's Storytime
oh ...i got ya now..
|
Re: Ok Boys and Girls it's Storytime
Quote:
|
Re: Ok Boys and Girls it's Storytime
Thanks Regan... Dads been in and out of the hospital the last few weeks..hes doing good now..
Appendicitis got him..and a few other health issues..but they're doing good I did a small update on the "inny" thread.. |
Re: Ok Boys and Girls it's Storytime
I thought I had a big problem with my new Alternator setup. It just pans out as ignorance on my part. I got a special pulley that uses an HTD belt just like my Dry Sump Pump. I thought it wasn't going to work. After talking to the guys at Jones Racing where it came from. I thought I was going to have to convert to a different alternator. Nope! I go by the Alternator shop this morning. Tada he plucks out the spacer and my pulley fits lol.
https://hosting.photobucket.com/imag...w/IMG_0117.JPG |
Re: Ok Boys and Girls it's Storytime
This is my new drive setup. It's a 49 tooth on the crank and 22 on the alternator.
https://hosting.photobucket.com/imag...w/IMG_0120.JPG |
Re: Ok Boys and Girls it's Storytime
It's so cute. Lol Hell I'm glad it will work. I ordered two custom length belts today.
https://hosting.photobucket.com/imag...w/IMG_0119.JPG |
Re: Ok Boys and Girls it's Storytime
That's some serious drive power for the alternator.....!!
|
Re: Ok Boys and Girls it's Storytime
Quote:
|
Re: Ok Boys and Girls it's Storytime
I was also turning the alternator too fast with the V belt deal. I couldn’t get a replacement v pulley for my splined drive. So I was kinda forced to adapt.
|
Re: Ok Boys and Girls it's Storytime
What do you do when you're bored? Find something to entertain you. I repurposed a header tube from Blue and made a custom exhaust extension for Whitey. This tube had over 160hp running through it. I think it will handle the little 350. Lol
https://hosting.photobucket.com/imag...G_0142_(2).PNG |
Re: Ok Boys and Girls it's Storytime
The 'feel good' moment that makes you chuckle....
|
Re: Ok Boys and Girls it's Storytime
Well I took apart this erector set of bars today. Then carried my rearend to my friend Tony. Back in go the 4.56's.
https://hosting.photobucket.com/imag...w/LDNP4981.JPG https://hosting.photobucket.com/imag...w/IMG_0147.JPG |
Re: Ok Boys and Girls it's Storytime
On a side note. Even if you don't have an ATV or a Motorcycle that little jack is pretty handy.
|
Re: Ok Boys and Girls it's Storytime
So much easier to just remove a center section, just saying, only thing Ford got right LOL.
|
Re: Ok Boys and Girls it's Storytime
Quote:
|
Re: Ok Boys and Girls it's Storytime
I went with a Frankland quick change rear end. With my 4:11 ring gear in it I have 128 gear ratios to chose from that I can change in 15 minutes. I think they run from 2.11 to about 8.50 or so. It also looks cool. So there's that. Thank you for your time.
|
Re: Ok Boys and Girls it's Storytime
Quote:
|
Re: Ok Boys and Girls it's Storytime
It's a QC-80 case from a guy I pitted for when I was young. I took it to the Frankland factory in Pennsylvania and had them build it for 1000 hp. Moser axles. I'm running a Bicknel torque arm with the triple biscuit to take up some of the shock. I had it made to fit my 53 3100 and my 12.88" Wilwood brakes. It's going behind the 1000 hp blown 292 I'm building. we will see which one blows up first.
|
Re: Ok Boys and Girls it's Storytime
Quote:
|
Re: Ok Boys and Girls it's Storytime
Quote:
|
Re: Ok Boys and Girls it's Storytime
Mick I wish I had something like that to work with. I'm stuck with my old Dana for now. Looking forward to see how your QC deal and build turns out.
|
Re: Ok Boys and Girls it's Storytime
5 Attachment(s)
Quote:
|
Re: Ok Boys and Girls it's Storytime
That's nice Mick
|
Re: Ok Boys and Girls it's Storytime
No real updates. All my motor stuff is still out. We are two months in on rods and pistons. It's PRI Show week so all the performance folks shut down to go there. I'll be lucky if the rods and pistons show up before the end of the year. My new lifters came in though. we went with BAM lifters. They are DLC coated axle no bushing or bearing. My rear end is sitting in the floor. I need to put it back in but that's no big deal. I just hope I don't get hung out till the last minute. Our first race is the last weekend of February.
|
Re: Ok Boys and Girls it's Storytime
https://hosting.photobucket.com/imag...w/IMG_0227.JPG
Well the rear is back in. Ken came out yesterday and helped me bleed the brakes. The money I wasted on this gear experiment would have more than paid for new slicks that I need. |
Re: Ok Boys and Girls it's Storytime
https://hosting.photobucket.com/imag...w/IMG_0229.JPG
I guess the light was shining just right though the window. Ken noticed this wave inside the bed. I guess it may be a good thing the tailgate is bolted on. It may have saved other parts of the bed when the frame broke. |
Re: Ok Boys and Girls it's Storytime
https://hosting.photobucket.com/imag.../IMG_E0228.JPG
Just a random pic. I think my gauge cluster will look good out in the daylight. |
Re: Ok Boys and Girls it's Storytime
I wondered if the bed suffered any stress from the frame rail issue & that sure suggests it did. Doesn't look too bad though so there's that....
Progress is looking good. Merry Christmas! |
Re: Ok Boys and Girls it's Storytime
Quote:
|
Re: Ok Boys and Girls it's Storytime
No parts right now other than new slicks. I'm still waiting on rods and pistons. I hope I get to race in February.
|
Re: Ok Boys and Girls it's Storytime
And you of all people know it's going to get here within a week of each other just for the 'fun' factor.
|
Re: Ok Boys and Girls it's Storytime
Quote:
|
Re: Ok Boys and Girls it's Storytime
https://hosting.photobucket.com/imag...080&fit=bounds
This is where we are at now. https://hosting.photobucket.com/albu...080&fit=bounds This is where I need to be in six weeks. I got word from Rick that my heads were ready. I also got word from Donnel that my rods and pistons should be here next week. |
Re: Ok Boys and Girls it's Storytime
You got this!
|
Re: Ok Boys and Girls it's Storytime
Quote:
Thanks for the vote of confidence Karl. much appreciated. |
Re: Ok Boys and Girls it's Storytime
Well I went and got my heads yesterday. We got pistons last week so the block is finished for the pistons. Still no rods as of Friday. Damn!
|
Re: Ok Boys and Girls it's Storytime
https://hosting.photobucket.com/imag...080&fit=bounds
Well here we go! I need to be in Belle Rose two yesterdays from today. |
Re: Ok Boys and Girls it's Storytime
Oh man..... try not to sweat it :lol:
|
Re: Ok Boys and Girls it's Storytime
Quote:
|
All times are GMT -4. The time now is 01:50 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com