Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

You'll have plenty of turning room in the front if you know somewhere to get some big inner fenders. :lol:
jk

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

LOL, i have the inner fender part handled (i got my wife to sponsor them) ....just dont want to hit the outer fender !

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

that might be how it ends up ...this is for her so i am going to have to add all the fun stuff...cup holders, center console big enough to put her gigantic purses in and all that jazz ! LOL

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Looking good Mike! How will your drive line look? I guess you will have a huge tunnel for the driveshaft?

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

i really dont think i will have to tunnel it at all for the driveline...we will see though !

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

whell if you put in the big center consolle you dont realy have to worry about making the tunnel look nice you basicly can make it boxshaped wish woukld make creating and fitting it to the floor a lot eazier , it will all dissapear under the cupholders and the big space for the handbag

i seen someone use the bucket of a wheelbarrow to build am new resessed firewall around a engine that was set back in the frame , the reason he had for it is that it allready has all the compound curves in it and he just needed to cut and shut it where he needed to change the height and width of the whole thing and weld it in the hole , looked like a ton of work done to the sheetmetal but was less work than doing it from scratch

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

LOL, yes i have seen that done also and it doesnt look too bad if they do it right !

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

That frame is coming along nicely!!!! I can't wait to see the body laid out, Keep up the progress
Posted via Mobile Device

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Awesome fab work!
cool to read/see the process come along,and quick

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Looking good Mike, keep rolling along...Jim

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Looks so good mike great job

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

She's looking real good Mike! on the DVD/NAV/Radio touch screen, you could even incorporate a metal plate over the end of the flip out the screen so it looked like a radio delete plate or a ash tray giving the classic look when it is put away, but touch a button and it flips out, with all the modern equipment.

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Man---that dash is gettin' some input! Aside from the variety of ideas, looks like you hit a winner on the choice. I'm really anxious to see what 'da man does with it!

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

That's an awesome idea I love that kind of thinking
Posted via Mobile Device

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

i cant wait to get it, and see what kind of cool stuff we can come up with !

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Did Dakota Digital ever come out with analog gauges for the 60-66 dash?

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

there was a flip up screen mod on here a while back that used the astray to hide the screen , you could use an amp and hook it up to a good mobile phone or tablet that way you have the navigation mp3 and 4 player and a lot of other stuff if youre willing to download the apps for it you could do the same trick with the astray but only use it to hide the mountingbracket and cable

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

This is what I am doing with the touch screen that will control my air suspension, and boost/meth injection levels. Which is why I suggested it for him, its a simple concept that looks clean and it works!;)

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

yes but i am not sure if i like them as good as one of their universal sets ! I think i am going to steal several of these ideas !

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

i am kinda digging this setup ? I need to get some measurements on it to see if it would fill the guage area nicely ?

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

That is clean!

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

We need more frame pics :)
Posted via Mobile Device

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Yep, something like that and not Autometer gauges in a "custom" gauge panel. No offense meant to anyone else.

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

i love it
going to work on it tonight
yes, i am looking for a more factory looking guage setup but still custom

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

I have been talking to Budnik today, what do you guys think of the Muroc IIII , With polished lips and ribs and ceramic coated gray pockets ?

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

I say sweet!!! Those look awesome!

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

They are pretty sweet, I like them
Posted via Mobile Device

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Those look great Mike
Posted via Mobile Device

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Nice, like salt flats with more detail. Do they come in 24k? :haha: Don't punch me please! :m3: :sexy:

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

thanks man
me too
thank you
yes they are....as for the 24 i dont know i was just looking at 22's so i didnt pay attention

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

I meant 24 carat gold baby!

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

LMAO.........i didnt catch that !! i will see if i can get them plated !

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Those are great!

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

I like the wheels. Not sure about the gray in the pockets. The color there would depend on what your paint colors are going to be.

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Perfect! But shouldnt you be askin the boss?

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Nice wheels, what color gray for insert???...Jim

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Gray is cool, what about gold centers? what color is the blazer going to be?

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

i like them they look a little like those ford racecarrims http://assets.speedtv.com/images/art...img_large1.jpg
but there flatter near the wheelnuts wish makes them look a lot better

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

I fall in this camp. Like the style though.

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

i think he could fill in parts in paint the same as the cars colour , not sur wish parts to use though , it might change the total look of the rim or make it look like it belongs on a clownscar
maibe two shades of grey or grey black