![]() |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
After dinner I cable tied and stapled the gaiter to the stick and also the anchor surround.
https://hosting.photobucket.com/imag...080&fit=bounds From the top. https://hosting.photobucket.com/imag...080&fit=bounds Carpets and floor sections in. Not yet got carpet for the firewall, so just gave it some satin black. https://hosting.photobucket.com/imag...080&fit=bounds Dash added in just to get an idea of how it looks. https://hosting.photobucket.com/imag...080&fit=bounds Closer up look. https://hosting.photobucket.com/imag...080&fit=bounds And close up of the completed gearshift gaiter. Some more detail work to be done. https://hosting.photobucket.com/imag...080&fit=bounds I have to say, I am pretty pleased with the outcome so far. Later. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Look around.
Some nice stuff out there. Over at Craigs for the Queens Jubilee weekend. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.Photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Last night Craig brought me some items I had asked him to collect for me……… https://hosting.photobucket.com/imag...080&fit=bounds Today Craigs wife, Lorraine asked me to make her a rustic garden bench using one of the new sleepers they have stashed out back. So of course I could not just screw some bits together. Went for a rummage in Craigs woodpile. Found so e very green, moss covered wood. Pressure cleaner to the rescue. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Measured and cut the sleeper. https://hosting.photobucket.com/imag...080&fit=bounds While I was in an artistic mood, I called Elli, and asked her to draw me a cat………. https://hosting.photobucket.com/imag...080&fit=bounds Got going with the router. Result https://hosting.photobucket.com/imag...080&fit=bounds Going further with the router, I managed to spell PEACE correctly. https://hosting.photobucket.com/imag...080&fit=bounds Test fit. https://hosting.photobucket.com/imag...080&fit=bounds Then made a backrest. https://hosting.photobucket.com/imag...080&fit=bounds And job done. https://hosting.photobucket.com/imag...080&fit=bounds Lorraine was very pleased. Even cooked me dinner. I also cut a Hawthorn hedge which is a nightmare. Couple of beers next. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
1 Attachment(s)
This turned out to be a great wooden bench, it is certainly not easy to write with the milling machine. Since we were just slowed down by Covid19, we watched trooping the color for the jubilee, what a great queen over this long period, what a great presentation from the regiment.
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
Yes, the milling machine is less controllable used freehand. But it suits the style of the bench. Once it ages and blends into the garden it will be good. Saturday at Craigs. Weirdly slow, but busy. We prepped the American mail box mounting that had to wait this long until the gate post was repaired, two large trucks had managed to hit it last year. https://hosting.photobucket.com/imag...080&fit=bounds And weirdly, in the old mailbox were all these address change documents from DVLA. Seems a few more came before. Who needs this many V5c documents. Craig does. https://hosting.photobucket.com/imag...080&fit=bounds After this we headed into Whitchurch for a few hours. I needed a few things, including a small gift and a card for Sally, turns out that I needed a bottle of Jack Daniels Tennessee Honey to celebrate the Queens Platinum Jubilee with. Saw a few older cars, some lovely British vintage stuff. Including this mechanically fully restored Land Rover, a double mailbox with patriotic crocheted cover and a lovely large cast iron drain cover. Foot added for perspective of size. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Back home we unloaded the 8 foot concrete posts and carried them around to where the reclaimed/recycled greenhouse would ho. A bit of digging and levelling to get the foundation work sorted. Lunch on the job was curried beef mince on rice, on site and a cuppe later. https://hosting.photobucket.com/imag...080&fit=bounds Then I spent an hour cleaning it all up. https://hosting.photobucket.com/imag...080&fit=bounds While I was doing this, Craig burned and cleared a load of his hedges where the previous owner had for years just dumped all cuttings and garden waste. It took a few hours but made a huge difference to the fences and underhedge spaces. Much better. Glass next. https://hosting.photobucket.com/imag...080&fit=bounds After the greenhouse, I got the super long extension put and got my personal hedge trimmer from the car. Then went up to the rear and side boundaries and hard cut the hawthorn horse paddock hedges back. They have not been cut since last year and needed a good meter or 3 foot cut back. Once done and cleared up, it looked a whole lot tidier too. We decided to shut shop by 6.00pm and relax with the Queens Jubilee etc. Dinner was pretty much unsurpassed. Meatballs in Tiger bread baguette rolls, followed by another bowl of trifle. https://hosting.photobucket.com/imag...080&fit=bounds Overnight rain set in, so the planned bootfair today was shelved. Watching the rain is rather enjoyable too. Headed home, down South Later. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Well.
Alllll the way from Mumbai (Bombay if you are older) via Shropshire……. New headlights. https://hosting.photobucket.com/imag...080&fit=bounds I really do hope they look as good in reality as it did in concept. We will see, later. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Popped over to my friend Kevin this afternoon to use his hydraulic pipe bender to try and see if I can actually make up my own roll bar as local builders are too busy to take on a small job like this.
He has completed his build too. Not bad for a first build done in your 70’s https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Popped over to my friend Kevin this afternoon to use his hydraulic pipe bender to try and see if I can actually make up my own roll bar as local builders are too busy to take on a small job like this.
I took my template and a length of scaffolding pipe. Resulting in. https://hosting.photobucket.com/imag...080&fit=bounds And realising that I should be able to pull it off. https://hosting.photobucket.com/imag...080&fit=bounds I will have to find a 14 foot length of scaffolding pipe to use. Also important is to keep in mind the amount the metal moves when you bend it in the hydraulic press. Pretty chuffed with this tonight. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Went out to walk Bonnie tonight.
Up,a lane I saw a pile of scrap. And a nice wrought iron bracket. On the way back, I went and knocked on the door and asked if I could rummage in the junk. Yes of course came the reply. Walking back toward the car, carrying this lot for 2km had Sally taking a pic of just how good I look scavenging. Do I care? https://hosting.photobucket.com/imag...080&fit=bounds Back home I checked it out. Thermometer one side, https://hosting.photobucket.com/imag...080&fit=bounds Clock, that works and barometer on the other side. And it all works. https://hosting.photobucket.com/imag...080&fit=bounds Chuffed for sure, a nice thing to hang somewhere.. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Real nice find from your walk.
Very nice shirt you are wearing too. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
That hoody came from Tat2Don years ago in a care package. Well worn, but still a favourite. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Went for a walk with the dog out toward Cliffe and Cooling.
Saw a few intersting things Last on the road in 2017 Dodge Polara. Is it valuable, covetable? Who knows. https://hosting.photobucket.com/imag...080&fit=bounds Empty barn near it. I could fill it fast. https://hosting.photobucket.com/imag...080&fit=bounds Some real beauty out there. Also a few retros in farm yards with a lot of long grass around them. I may investigate some more in future. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Part of the walk passed Cooling Castle. Owned by Jools Holland. For the uninformed…….. https://youtu.be/_A1VAsl_4TY A nice place to call home. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Also walked through the Parish Church yard. https://hosting.photobucket.com/imag...080&fit=bounds Home to some history. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds And description below. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Spoke to some other interesting people on the walk. One guy with a few motorcycles inside his house in the lounge and large entrance. I am not the only one then it seems. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
A nice piece of land where you live, very nice.
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
Thank you. I made the choice not to live in the city a long time ago. I do not like cities. So always happy to live out in the middle of historic England |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
After work I thought I would go mock up the roll bar in order to calculate the rear braces.
Then realised that the seats need to be in to get the spacing and angles right, and that would result in the braces and top support being in tje right position. Bloody hell, it took forever to get all the bolts n nuts fitted and fixed down. I also added the second lap strap on the drivers side to the seat, bolting it to the original seatbelt mount. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Once the seats were in, and tested, and passed on QC, the next was to add in the CAD piece behind the eat. Followed by the rear brace which mounts at the same level as the shoulder harness mounting brace. I wanted them to be as unobtrusive as possible. Success. It then mounts int the chassis through the rear chassis mounting plates. https://hosting.photobucket.com/imag...080&fit=bounds If I manage to get the pipe bends right, this could work OK. Next will be making up a CAD profiles for the braces. Fingers crossed of course. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
George, the cat I don’t have, seems to have settled in here.
His owner is pregnant with No2 and it seems he prefers sleeping here most days. Easy pet ownership in a way. He comes, he eats (I leave some dry food in a plate for him to graze from and give him the odd bit of chicken or ham, yes he trained me well) he sleeps, he leaves. And repeat. https://hosting.photobucket.com/imag...080&fit=bounds |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
More parts to the puzzle ordered in
£54.00 from Evilbay. Hope the drivers side fits in. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds And rather than collecting on Saturday morning, delivery of a 4.2 meter and two lengths of 1.2 meters of pipe, to add to mine. Also realised that the rear braces need to be different to create the right look. https://hosting.photobucket.com/imag...080&fit=bounds Can you see the rear brace? https://hosting.photobucket.com/imag...080&fit=bounds I am really liking that. More on Saturday. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
After work. Work.
https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Weekend. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
This is really a great roll bar, great work.
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
Thanks Harald, Just bent a pair of braces before coffee and toast with Sally this morning. Cross brace cutting next, then make it all fit by cutting the curved shapes where they all join, grind back all the galvanising so I can stick weld them together and tack onto the base plates after I make the rear base mounting plates plates and weld in a pair of captive bolts so they all can slip fit together and be bolted down in one, once full welded up. . https://hosting.photobucket.com/imag...080&fit=bounds Fingers crossed. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Long day.
Made the rear chassis mounting plates for the supports. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Then made some “fish mouth” or whatever you call them, joins. https://hosting.photobucket.com/imag...080&fit=bounds Mocked up. https://hosting.photobucket.com/imag...080&fit=bounds Chassis mounting plates welded on the braces. https://hosting.photobucket.com/imag...080&fit=bounds Mounted in the cab, roll hoop in place, on its base plates…… For the anal amongst us, zoom in, knock yourself out. https://hosting.photobucket.com/imag...080&fit=bounds Carrying on, later, around 5.00pm John the lodger joined me, both to help and give advice. Then Mickey came around. They sat chatting, discussing South London, where they both grew up, a lifetime ago. Mickey had to point out the joins being very good. https://hosting.photobucket.com/imag...080&fit=bounds A load of preparation and grinding to make the joins work. https://hosting.photobucket.com/imag...080&fit=bounds Lots of tacking in place, removing and stick welding. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Getting there, bit by bit. . https://hosting.photobucket.com/imag...080&fit=bounds Happy https://hosting.photobucket.com/imag...080&fit=bounds Done. Paint in the morning. FIA approved……… https://hosting.photobucket.com/imag...080&fit=bounds Cheese and crackers for dinner. A serious rum, after a tall beer. Tired tonight. Rewarded https://hosting.photobucket.com/imag...080&fit=bounds Bootfair in the morning, if I wake in time.. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
So yesterday @nickwheeler was here and the day ended in a bit of a whimper.
Trying out the rear lights and wiring, he and John the lodger found that the existing units were so messed up, not reading the current etc……. That we realised I will need to find another Mk 2 Capri LEFT Hand rear light unit. They are left and right handed for those unaware, despite looking universal. If anyone has a decent left handed light body or a pair for sale, donation, trade, whatever, please PM me The lenses are good. So only the bodies needed. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Thank you. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Sunday morning a few yard jobs etc.
No bootfair as I was awake from 3.15 to 5.00 and then snoozed to 07.00 Then onto a bit more tidying up on the welds, which had actually gone really well, with deep penetration. Hammerite https://hosting.photobucket.com/imag...080&fit=bounds Mickey was around for an hour or so too. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Before lunchtime, an unusual treat for me, I rarely drink beer. But the heat and feeling good about the finished rollbar necessitated it. https://hosting.photobucket.com/imag...080&fit=bounds Second coat later in the afternoon when Nick was here. https://hosting.photobucket.com/imag...080&fit=bounds In the afternoon, Nick came, we chatted a while, opened another beer(s) and pressure tested the cooling system, a clamp tightened up more saw it all show as dry. Nice testing kit. https://hosting.photobucket.com/imag...080&fit=bounds Pressure. https://hosting.photobucket.com/imag...080&fit=bounds One of the small eyesore jobs to do was clean and rattle can the radiator in a dusting of satin black. So once more dismantling the front end, well, it became twice. https://hosting.photobucket.com/imag...080&fit=bounds Blacker. https://hosting.photobucket.com/imag...080&fit=bounds While at it, I also made and folded a blanking plate for the top of the radiator to drive all the air over it, and also close up the view into the engine bay. https://hosting.photobucket.com/imag...080&fit=bounds In the mean time Nick and John were trying to figure out the wiring and lights…… Reported above, and looking for a left hand light unit. https://hosting.photobucket.com/imag...080&fit=bounds With the lighting failure, Nick then added some Riv-Nuts to the back of the bumper to retain the lower lip of the front grille. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds After final assembly, the black blanking plate and grille do look a lot tidier too. https://hosting.photobucket.com/imag...080&fit=bounds So a weekend with a fair amount of stuff getting done. Thanks for checking in. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
[quote author="@westbay" source="/post/2736092/thread" timestamp="1655105341"][a href="https://www.ebay.co.uk/itm/125337339091?hash=item1d2eb004d3:g:ScAAAOSwBDJikUp7"]link[/a][/quote]
THANKS A MIL TONY. BOUGHT. DELIVERY BY FRIDAY, HOPEFULLY. https://hosting.photobucket.com/imag...080&fit=bounds |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
So the roll hoop is done.
Next stop…. Get the Harnesses attached. Needs some slide buckles. 3mm steel plate should do just fine, NASCAR approved after all. https://hosting.photobucket.com/imag...080&fit=bounds Chassis and seat mounts as well . Copy https://hosting.photobucket.com/imag...080&fit=bounds Cut https://hosting.photobucket.com/imag...080&fit=bounds Finesse https://hosting.photobucket.com/imag...080&fit=bounds @nickwheeler it, I mean paint. https://hosting.photobucket.com/imag...080&fit=bounds Also in the post today. These. Should clear things up a bit. https://hosting.photobucket.com/imag...080&fit=bounds Biggest concern was if the motor would fit in a way that would leave my knuckles intact. Success it seems. https://hosting.photobucket.com/imag...080&fit=bounds Another small step forward. |
All times are GMT -4. The time now is 02:57 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com