![]() |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
As far as being sick is,concerned, it is more inconvenient than anything else. Quote:
It will be great if it turns out to be a fun car. Previously spoke about this. Contemplating it. Never actioned. Today I was thinking, while indoors, trying to rest with this bloody Covid. Do I add a 500mm drop down front façade below the red panel, to end up just above the level of themgarage door? It will help weather and rain proof the area a bit more when rain comes in hard from the East. I plan on painting it the equivalent of Castrol Green and adding some fake garge signage in Rwd onto it. Looking over the hedge from the neighbours garden. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Hope you get the idea. Opinions? |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Looks like a USA road trip is on again.
And a cheaper flight by around $130.00 or 100 English Pounds than the last one in 2019. Hopefully I can make it into Pueblo, Colorado to Snyders Junkyard to see what is available, with title and at a sensible price. https://hosting.photobucket.com/imag...080&fit=bounds Still contemplating where to post the road trip report. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
10 minute job.
All I could get done today. @nickwheeler and I spoke about these lityle bits before. Why not sort them all when building originally. My excuse was running out of underseal. But a can of satin black works fine. https://hosting.photobucket.com/imag...080&fit=bounds Plus some masking. https://hosting.photobucket.com/imag...080&fit=bounds Jobby done. But I should not have. My eyes tell the true story. Knackered still. https://hosting.photobucket.com/imag...080&fit=bounds Also masked the wheel arches while I was at it. https://hosting.photobucket.com/imag...080&fit=bounds Much better after. https://hosting.photobucket.com/imag...080&fit=bounds Another little tidying up job out the way. First 10 meter roll of webbing arrived today. Waiting for the 15 meter roll. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
You're a tough guy, no resting. Your fun car will be great.
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
I was born restless. Busy is a good thing for me. Back to work. Bit of yard work done. This part of the carport build is 18 months overdue. https://hosting.photobucket.com/imag...080&fit=bounds This was where it was headed. https://hosting.photobucket.com/imag...080&fit=bounds Think an extension of my Sinclair Oil corporation colours, first started on the framework of the carport. Red on Green. https://hosting.photobucket.com/imag...080&fit=bounds Painting. https://hosting.photobucket.com/imag...080&fit=bounds Green. https://hosting.photobucket.com/imag...080&fit=bounds Add some blue and red. https://hosting.photobucket.com/imag...080&fit=bounds And that was it for tonight, give the Hammerite 24/48 hours to dry. https://hosting.photobucket.com/imag...080&fit=bounds Next stop, fitting, fixing and signwriting. Or something like that. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
PART TWO.
FLIP OVER, PAINT WHITE. Reflective rear end. https://hosting.photobucket.com/imag...080&fit=bounds Should reflect. https://hosting.photobucket.com/imag...080&fit=bounds That is very RED, really RED. Second coat. https://hosting.photobucket.com/imag...080&fit=bounds Now to try leave it alone a few days to dry through. Weekend is here. First beer opened. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Rian... You are a very driven man. You constantly fix, improve, tinker and create everything around you. Your space is very cool, the vehicles you touch are fantastic and the stories you tell are a great read. Thanks man, I don't comment often but I do keep up with the antics. By the way... it's maybe time to get back on the truck that brought us all together... maybe?
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
Thank you Clem. You are right, my head is ready for the truck again. At age 60 I was hoping to drive it, not sit and stare at a pile of new parts and body that needs paint. (And a load of work) Watch this space, I am. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Had lunch.
Job done. More to come, but the structural stuff is done for now. There is a “Plan B” for further damage control if needed, but not for now. Started off and stepped back, thinking errrrmmm…… NOPE. https://hosting.photobucket.com/imag...080&fit=bounds Carried on, redid plate no 3 as it is different and was visibly wrong. Still not sure. https://hosting.photobucket.com/imag...080&fit=bounds Then did numbers 4, 5 and a short 6 and it looked tatty. Started to add in the red, stabilising structural strip at the bottom….. Feeling better. https://hosting.photobucket.com/imag...080&fit=bounds And then the second part added made it look a lot better. https://hosting.photobucket.com/imag...080&fit=bounds Finally added a short strip to the end where it meets the garage gable wall. Tidy enough now. https://hosting.photobucket.com/imag...080&fit=bounds A few more visual bits to add and it should look good enough. Also, the daylight is still more than enough in there. What shall I do next then? Tempted to mess with the Rezin Rockit but wiring is just not my thing. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Added a bit of detail.
Also did some small jobs like painting all the screws white etc. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds And happy with the result here. Just need to find the red hose for the pump and do a final assembly. Beer time I think. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
So after getting the carport job done I thought a simple job would be to get the contact adhesive out, mask the Rezin Rockit and wrap the centre bar in webbing, as the second 15 meters had been delivered today.
So I dismantled the two safety harnesses and started wrapping the centre bar. 10 meters of webbing as ordered off eBay. Until……… https://hosting.photobucket.com/imag...080&fit=bounds Seriously? 6 meters and then another 4 meter length. I was bloody livid, messaged the seller to ask him to resend a single 10 meter length as ordered. https://hosting.photobucket.com/imag...080&fit=bounds I am not even sure under what to file this sort of behaviour. Some time through the day I saw this French registered and built Jeep. I like the look. https://hosting.photobucket.com/imag...080&fit=bounds No roll bar though. Is it dangerous? . |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
It's become a great shop, you might as well go to the gas station, annoying with the belt. Dangerous... who knows, but we're also more scared today. or?
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
The function was built in 2020 and some in 2021 and it is a great place to work and play. Especially in bad weather. Message from Ebay seller is that he sent me the 15 meter as one piece. However, I replied that the first order was 10 meters, which he screwed up. Lets see if he fixes it. Slim pickings at the bootfair today. New garden sprayer £1 (I stood on the old one) Pack of 50 @ 1mm cutting discs £20 Candle tray for American artist friend £2 2 superhero Mugs 10p each Good Scissors 50p each Batman Multitool £1 https://hosting.photobucket.com/imag...080&fit=bounds |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Sunday afternoon and @nickwheeler laying down on the job.
https://hosting.photobucket.com/imag...080&fit=bounds But the rear lights and splash guards were fitted, changed the screw in bracket to two pairs of Studs in order to make seating and tightening a lot easier. Ultimately, the wiring ended up entering high and on the opposite side, so original access now surplus. Should make a huge difference to splatter and keeping things clean out back. https://hosting.photobucket.com/imag...080&fit=bounds Late afternoon photo when wrapping up for the first time (Nick likes to find more small jobs that need to be done) Lenses back on for the first time in a while. https://hosting.photobucket.com/imag...080&fit=bounds One of the jobs that kinda stalled was to get some automotive carpet in behind the pedals and onto the firewall, to cover the high density foam I previously added. I was not going to buy a roll of carpet just to use a 500x500 piece. So I rummaged in the bits of carpet from the original floor and found it…….. The original piece. Bucket of fairy liquid, washed followed by three rinses and set out to dry, it was a hot day. Edited and cut to fit as footwell dimensions have changed slightly. Brutal contact adhesive and fitted. https://hosting.photobucket.com/imag...080&fit=bounds Next small job I needed to do, which had waited for the carpeting to get completed was a left side footrest. I had desperately wanted to use the one GRIZZ footrest that Andy in Oklahoma had cast for me. Only problem it turns out, was it was a right foot, so only good for an accelerator pedal. So I went to plan B which has laid in the wings for years. Can you tell what it is yet? ( I used to have a coffin shaped one too, gave it to,someone) https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Some planning, finding a long enough bolt to go through the floors etc. Remove the carpet before drilling, as you know what happens if you don’t. https://hosting.photobucket.com/imag...080&fit=bounds Job done. Nick holding the i side down while I tightened up the Nyloc underneath as my arms would never reach. Really happy with the result. https://hosting.photobucket.com/imag...080&fit=bounds While I played with these cosmetic finishes, Nick continued to make up magical wiring harnesses, extending non extended, 10mm cut off wires etc to give us a pair of these…… Working. https://hosting.photobucket.com/imag...080&fit=bounds In the mean time again while he was measuring up the handbrake for missing parts that need custom making, I did some woodwork, after finding some solid Oak. Supports for the front indicators and marker lights to rest on when fitted. The new lights are slimmer by 20mm than the originals, so some filling in will need to be done. Part one. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Remember the small jobs Nick keeps finding after closing time? Back to the pedal box and clutch pedal. A 3mm change is needed to make things work more smoothly. No way we are adjusting the firewall etc. So out came this guy. Watch this space. https://hosting.photobucket.com/imag...080&fit=bounds Weekend over. Thanks for checking in. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Forgot to mention…..
@nickwheeler also got this done yesterday. https://youtu.be/A7qY_ToBzBM After all, it is an MOT requisite item. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Looks like the indicator/side light infill piece works just right.
Finishing and painting it when wired up and fitted. https://hosting.photobucket.com/imag...080&fit=bounds |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Always worth asking everywhere.
WANTED: I am hoping to get extremely lucky here……… My 2001 ZQ8 S10 4.3 Extended cab and long bed has an Extang cover fitted. It is way beyond pretty, sort of still works, but a previous owner added cable ties to keep the cab end attached to the frame. They are not manufactured anymore. HOWEVER….. Does anyone have a very good used one, or even a led for a new unused one for sale? I will be in Wright City, Missouri near St Louis in Late August and first week of September. Please post here or send a PM if you have something Thanks. My current cover. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
4 hours on Teams, in training.
Enough to make me reach for the blunt razorblades. So after work around 5.15 I headed down, bucket of water and a lot of ambition. Dulllllllll as dull can be, https://hosting.photobucket.com/imag...080&fit=bounds So G3 compound on a Scotch pad, followed by some electric polisher action, and more hand buffing. https://hosting.photobucket.com/imag...080&fit=bounds Got me here. https://hosting.photobucket.com/imag...080&fit=bounds Followed by T-Cut, Mer and Zymol polishes. Not doing any more, but it is an improvement on what I started with. https://hosting.photobucket.com/imag...080&fit=bounds Not sure why I made all the effort, but at least I feel better after a day watching the screen. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Made a small handle last night from some climbing rope I had stashed away.
Started with a hangmans noose to create the handle and locking it in place. John the lodger was down here too. Celebrating their team “My Left Foot” coming 4th out of 70 teams at the Red Bull Soapbox race on Sunday. Certainly does not fit the bill for “disabled” He is always game for doing stuff, the riskier the better. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Mocked up. I am sure a passenger, if I have any, will appreciate it. https://hosting.photobucket.com/imag...080&fit=bounds Walking back from the house after fetching us a drink, I noticed again how much I like this profile, and though the camera loses some of it, just how low this thing came out. https://hosting.photobucket.com/imag...080&fit=bounds Washed the webbing and hung it out to dry as the Ebay seller is certainly a d!ck who wont replace the incorrect order he sent. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
That's strong, you have great things to start with. It's progressing.
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
More in a bit. Finished the pump and hose tonight. I think I do like that. https://hosting.photobucket.com/imag...080&fit=bounds Completely useless bit of furniture that looks better than it functions. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
.
BAI-JEEZUS Handle. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Next job, rear cross bar. Padded. https://hosting.photobucket.com/imag...080&fit=bounds Then wrapped. I used contact adhesive spray on both lengths of foam to help the webbing grip and not shift. Once I made it to the last 300mm I added a narrow webbing loop into the wrap to aid pulling the end through and locking it in place once cut back. John the lodger suggested it as the most secure way to actually ensure it did not come unstuck. https://hosting.photobucket.com/imag...080&fit=bounds Use the narrow webbing to pull the wide stuff through under the wrap. I adde a small length of masking tape over the contact glue to ensure the pull through was easier and did not get stuck halfway. https://hosting.photobucket.com/imag...080&fit=bounds And pulled through. https://hosting.photobucket.com/imag...080&fit=bounds Cut off, and wrap pulled back, allowing me to tuck it in and pull the wrap over the end with long nosed pliers. https://hosting.photobucket.com/imag...080&fit=bounds Harnesses refitted over the padding and seems to fit well. https://hosting.photobucket.com/imag...080&fit=bounds Job done. https://hosting.photobucket.com/imag...080&fit=bounds Really pleased with that result. Friday. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Ha, someone should say that you don't learn anything here, great Job Rian.
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
I love these forums because of the “hive mindset” and massive knowledge resources available to all of us. Remember last year, dismantling the Horse stables with Craig, his son Kyle and Fil? Well, the new concrete floor and a 4 brick foundation wall are all up now. Two extra brick courses will give some more headroom than the stables did already. Last night, this was the state of play for Craig and Kyle on their own. The next big job once the rest of the walls are up, will be to get those super sized roof panels up and screwed together. Certainly a job for four or more guys. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Bootfair today: Slim pickings. VW Golf stepdown pipe unused £2.00 “Axe” £1.00 Single hinge £1.00 3/4 box screws 50p 10 flap wheels for £8.00 normal price £1.00 each. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Always said I was not going to do this job.
Getting it done by a refurbishment specialist would be £300.00 or more. But 5 plus hours of therapy, cleaning, prepping, masking repeatedly, followed by two cans of a louder Gold than was on there, and two large cans of Satin Black to cover the rear inside bands and front hub faces, re-inflating, detailing the axle hubs and drums in black made me very happy, despite the very hot day out there. Rears cleaned, prepped and painted. https://hosting.photobucket.com/imag...080&fit=bounds Front side masked. https://hosting.photobucket.com/imag...080&fit=bounds Painted https://hosting.photobucket.com/imag...080&fit=bounds Before and after. https://hosting.photobucket.com/imag...080&fit=bounds Painting https://hosting.photobucket.com/imag...080&fit=bounds Both Golds done. https://hosting.photobucket.com/imag...080&fit=bounds Black centres prepped, masked https://hosting.photobucket.com/imag...080&fit=bounds And a pic of them before and after paint. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds So different from where I started. Side https://hosting.photobucket.com/imag...080&fit=bounds Rear https://hosting.photobucket.com/imag...080&fit=bounds Front https://hosting.photobucket.com/imag...080&fit=bounds Low-ish. https://hosting.photobucket.com/imag...080&fit=bounds Closed shop, showered by 3.30 as too hot really to have fun. Cold Beer time I think. |
All times are GMT -4. The time now is 02:02 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com