The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   projects and builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=197)
-   -   Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO! (https://67-72chevytrucks.com/vboard/showthread.php?t=585901)

realvc 09-25-2022 05:22 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
No matter what happens in our world, life does keep on going.
Hang in there Rian.

I wonder how Vlad is doing in his world.

Dennis knows how to take of about anything.

Grizz1963 09-26-2022 04:12 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Quote:

Originally Posted by realvc (Post 9127784)
No matter what happens in our world, life does keep on going.
Hang in there Rian.

I wonder how Vlad is doing in his world.

Dennis knows how to take of about anything.

Thanks Vince.

Vladimir is doing fine.

Dennis………:mm: yes.





Weekend saw me clean the carport and rearranging stuff.

Great way to get started.

Except, I did not get started. Instead I did other jobs, like helping Sally in her garden, and a few other house jobs.

Sunday I decided not to go bootfair, unusual, but also evidence of my state of mind currently with the redundancy bollloxx hanging about.

So I used a foot pump (small compressor power switch seems to have died, along with the compressor) to pump the Rockit rear tyres, both were at 1 Bar, and got them to 3 Bar.

Sat around for a bit, then headed out to buy another pair of trainers, as the last expensive pair give zero support when walking the fields. Followed by some food shopping, stuff sure has spiralled from a price point of view.

Lets hope new trainers are better.


As I got home, @nickwheeler arrived, bringing Hotrod magazines and staying a couple of hours to chat.

Of course we drifted down to the garage.

Various discussions around both cars.

Including the right wheel nuts to be bought for the alloys.

I found one in my stash……



So we decided to lift the car, remove the steel and try the painted and tyred up wheel.


https://hosting.photobucket.com/imag...080&fit=bounds


https://hosting.photobucket.com/imag...080&fit=bounds


https://hosting.photobucket.com/imag...080&fit=bounds


I am still liking the direction this is headed.


And discussed an added bit of paint with Nick.


He is a lot more “conservative” than I am.


Have a good week all.

Grizz1963 09-28-2022 03:04 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Ordered new chrome (obviously Chinese quality) nuts for the painted alloys.

https://hosting.photobucket.com/imag...080&fit=bounds

Should look decent till the first wash, or rain or wet road hits it.

Still, worth doing.

Grizz1963 09-29-2022 11:18 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
So I am back on UK time, after the USA Roadtrip.

The job situation is currently up in the air.

I interviewed for my own/old soon to be revamped and not mine, job, last Wednesday.

No idea if I will stand a chance, despite past successes and track record.

These days it seems the process decides.

Anyway, seems the winners and losers (everyone gets a prize, even if it stinks) will be informed next Tuesday.

In the mean time, I just keep doing what I am paid for.


Back to the UK and Roadtrips.

Adam, Dennis’ son, wife Hanna and son Tripp, along with her mum and husband Ginger and Clark came over last weekend to spend some time in the UK as tourists.

AirBnB was their choice, near Paddington.

Of course the country ended up in all sorts of turmoil with the death of the Queen and subsequent actions, including cancellation of tours of Buckingham Palace etc.

So they were somewhat left to their own devices to entertain themselves and a one year old.



Yesterday I took a day vacation and hired a 9 seater Ford Tourneo van, 10 years old and a bit rough around the edges, but for £110.00 including some diesel it seemed good enough as other local companies could not help

Mickey next door gave me a kiddie seat to use, though they brought theirs along as well.

George loved it.

https://hosting.photobucket.com/imag...080&fit=bounds

Said transport.

https://hosting.photobucket.com/imag...080&fit=bounds

After a late start, dictated by Tripp, they took an Uber from Paddington to meet me at Rochester, plan was originally to take a train.

From there we headed down to Dover, our target.

Clark wanted to see the white cliffs and we managed to get some of that done, visiting the lovely Battle of Britain memorial.

Memorial is a lovely place.

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

Planes.

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

Clouds really enhanced the pics and mood.

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

From there we headed to Dover Castle.

A venue one really needs a whole day for.

Great mix of very old history and more modern (1945-ish WW11 era)

We only got there at 3.00pm and did one short tour of the underground hospital, then decided to pull the plug on being tourists and headed back to Chatham for an early dinner.

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

Return trip was uneventful.

https://hosting.photobucket.com/imag...080&fit=bounds

Group pic of course.

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

And inside of course.

Tripp charmed all the staff, a lot like his grandfather Dennis.

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

Food as always amazing.

Affordability is certainly something offered here, along with service and being welcomed as family.

https://hosting.photobucket.com/imag...080&fit=bounds

After dinner, the tourists took the train back to London from Rochester.

I returned the hire car, and discovered Tripps entertainment centre under the seat.

Ooooopppps.

And of course an overnight postal delivery was impossible, as the postal,service is striking tomorrow and Saturday.

And Adam and co leave at midday tomorrow.

So Clark took a train to Lewisham this morning and we met up to give him the last part of the puzzle.

https://hosting.photobucket.com/imag...080&fit=bounds

All in all, I was really pleased to have a day off work, and more importantly, spending it with friends

Life is good for sure. .

Grizz1963 10-02-2022 05:10 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
I forgot to post these pics.


Dennis had ordered me a super cool zip up hoody.


He felt the legend on the back was reflective of me…….


It was not delivered in time when I traveled there, so he sent it, along with some models along for me with Adam.


https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds


On display, pretty rare, collectable,

I just like them, from mate the late Ray, his wife Eve wanted me to have these.


https://hosting.photobucket.com/imag...080&fit=bounds


So the Roadtrip just keeps giving.



Back in St Louis, Dennis was fitting a newly painted door to the race truck transporter yesterday.

https://hosting.photobucket.com/imag...080&fit=bounds



That was until son Adam’s best mate since school, and all round great, not just good, guy, Tyler and he returned from Indiana where they had fetched Tyler’s dream-bucketlist car.

A 1960 VW Beetle.

All of 1100cc aircooled power.

For a guy in big displacement cars and trucks, including his “little” S10 4.3 liter, this is an interesting departure.

But we know about itches.


https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds


And typically, Dennis was straight in there to get it running.


https://hosting.photobucket.com/imag...080&fit=bounds


Looking forward to seeing what Tyler does with this car.

Braunschweiger 10-02-2022 06:29 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
A Beetle for the young man, that's a cool project. We need a lot more of these young people.

Grizz1963 10-03-2022 09:00 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Quote:

Originally Posted by Braunschweiger (Post 9129813)
A Beetle for the young man, that's a cool project. We need a lot more of these young people.

He has had lots of cars. But always wanted a Beetle.


Glad he found the right one.





Right

Good news.

Thanks for all the support from those who knew I was made redundant.

I get to keep my job. Thankfully.

Guess another excuse not to progress too fast on projects.

realvc 10-03-2022 12:31 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
That is Good News about your job.
Glad to hear you're doing O.K.

Grizz1963 10-06-2022 04:27 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Quote:

Originally Posted by realvc (Post 9130259)
That is Good News about your job.
Glad to hear you're doing O.K.

Morning Vince,

I’m thinking that every time one gets to go through these processes, a bit of you dies, the bit that cares about the company.

However, we are resilient, and I grow stronger too, knowing that it it is not personal, and there is always another sunrise to look forward to.

Paying the mortgage does feel good though.






Wheel nuts for Scruffy came in the post.


I am not sure they really should be called “chromed”

The finish is shoddy, and if they survive one season without falling apart on the chrome aspect, I will be surprised.


https://hosting.photobucket.com/imag...080&fit=bounds


Still, we have wheel nuts, so the alloys can be attached, once it passes MOT.

Braunschweiger 10-06-2022 12:46 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
That's Probably the normal Situation today, that you only get to Buy Garbage, Sad.
Nice that your job is continuing.

Grizz1963 10-08-2022 02:56 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Remember the LACE PAINT idea?


Well, Poundland delivered.

May be a better option, or a fail, but at £2.00 each. These Halloween spiders web tablecloth’s could work better than the planned old lace curtains.

We will see when the time comes to lay them down.

https://hosting.photobucket.com/imag...080&fit=bounds

Weekend is here.

Stuff to do.

Grizz1963 10-08-2022 02:59 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Quote:

Originally Posted by Braunschweiger (Post 9131270)
That's Probably the normal Situation today, that you only get to Buy Garbage, Sad.
Nice that your job is continuing.

Morning Harald,

Yes, bad, cheap quality on sale.


Thank you, yes it is good to have a job for some time more.

Sad that companies miss the point that they damage morale and drive so badly in what started out as the top national team when they break them up.

I heard yesterday that one of the girls who was offered a job, told them to get stuffed as she had landed a better paying, headcount job, so they then offered it to one of the girls who had failed to get a job……;

Imagine the loyalty and morale if they looked after staff the same way they look after profits.

Grizz1963 10-08-2022 03:04 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
@nickwheeler popped in today for a coffee, a chat and to have a dig (around) Looks like there is a lot more to be done here.


And yes, it will get done.


https://hosting.photobucket.com/imag...080&fit=bounds


https://hosting.photobucket.com/imag...080&fit=bounds


Not much else done today.

Cut the grass, finished up the small trailer I got on Tuesday.

Grizz1963 10-08-2022 04:51 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Had a clever little plan.

But it failed (probably)

Bought a cheap 4x3 foot trailer from a deceased estate.

Sight unseen.

Collected it.


https://hosting.photobucket.com/imag...080&fit=bounds



https://hosting.photobucket.com/imag...080&fit=bounds



Should have gone to Spec Savers or another optician.

Still……….

Committed.

Grizz1963 10-09-2022 02:37 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Realised back home, after Mickey helped me collect it, that typically, the tires/tyres were dry rotted and needed replacing.

Got them off, ordered two new ones, slightly wider with lower profile, near enough the same.

£70.00 fitted, with new valves and old ones disposed of.

https://hosting.photobucket.com/imag...080&fit=bounds

Removed the rear panel and light board as I wanted it removable for the proposed coming tasks.

Then used a trusty skateboard to move the wheel-less body up the driveway.

Pressure cleaner and some serious attention saw me get to know all the flaws.

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

Left to dry for 48 hours.

Then had some time to knock together a slip on frame.

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

Done.

https://hosting.photobucket.com/imag...080&fit=bounds

After work Thursday evening I found some old black paint in my stash (mistake) and painted the underside of the floor, all the steel and mudguards and wooden sides with this enamel paint. On the wood just to act as a sealer in case another colour came into play.

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds


Now some of you may know this, but @nickwheeler thinks that I am a whizzz with a brush and pot of paint.

So the last drops of green in a tin, made it onto the wheels.

Still need a pair of random hubcaps for them.

Green stripe.

https://hosting.photobucket.com/imag...080&fit=bounds

But that was not enough, so I dug out some red Hammerite as well.

Better.

https://hosting.photobucket.com/imag...080&fit=bounds

Friday I took a day off work to do things like shopping, coffee and lunch with Sally.

She very rarely asks me for anything, and even this was forced on her.

We had a good day.

Before she came over I painted all the white panels, again, more wood protection than aesthetics

https://hosting.photobucket.com/imag...080&fit=bounds

Reassembled the tailgate, lights, and fitted the wheels yesterday morning.

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds


I think I am happy with that.


Seems the original reason for buying it, will not be happening.


Still, I have a neat trailer for a few hours work.

Grizz1963 10-09-2022 04:39 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
This morning I got going early and got the Micra up in the air.

https://hosting.photobucket.com/imag...080&fit=bounds

Laid out the first job.

https://hosting.photobucket.com/imag...080&fit=bounds

Prepping some of the parts and surfaces needed to reinstate the exhaust system.

Cleaned up, drilled out the studs to enable the use of nuts and bolts.

https://hosting.photobucket.com/imag...080&fit=bounds

While crawling around I took a decent look at what the four corners looked like.

Not inspired.

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

Still……..

I felt up to the challenge.

When @nickwheeler arrived with his welder we got straight to getting the bolts welded onto the catalytic converter

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

Once I reintroduced the downpipe and had the Lambda sensor refitted that Nick had removed from its plug, the rest of the refitting, including some clear silicone on the gaskets and contact surfaces (clear silicone does not degenerate with excess heat) it looked good.

Nick tried the start up and I could feel there was no leak or blowby.

Perfect, just bloody awesome.

https://hosting.photobucket.com/imag...080&fit=bounds

Looking great.

https://hosting.photobucket.com/imag...080&fit=bounds


That was a good way to start the day.

Coffee next.





.

Grizz1963 10-10-2022 05:16 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Once we assessed the rust damage, and what was needing attention….. including a lot of screwdriver poking, mashing and banging, it was time to make a few test bits up.

Once you go to complex folds, there is a better or worserer sequence in which to fold the metal in preparation for welding in.

Even a Z-fold with unequal sides has a sequence.

https://hosting.photobucket.com/imag...080&fit=bounds

Tappy Tappy and away we go.

https://hosting.photobucket.com/imag...080&fit=bounds

I took the wheels off as well, as it clears up space to work and get tools in.

And of course mounting the car as high as possible helps too.

https://hosting.photobucket.com/imag...080&fit=bounds

Drivers seat removed, carpets and side panels out the way, rather safe than run for a fire extinguisher.

https://hosting.photobucket.com/imag...080&fit=bounds

Going to the passenger side, more SPECTACULAR BODGERY became evident.

Bits of plate siliconed and then seam sealed over rust.

Impressive MOT you passed there mate.

And a lot more on both sides became evident as we proceeded.

https://hosting.photobucket.com/imag...080&fit=bounds

So making two outer sill plates and everything else in a 600mm or 24 inch length became the plan of action.

Starting on the drivers side.

https://hosting.photobucket.com/imag...080&fit=bounds

Then I climbed in with the grinder and Knotwheel of truth (TM @pauly) exposing as much healthy metal as I could, creating two existing reference points on the underside where plates joined.

Making sure these points are absolutely pristine, means the welder just does exactly what you ask of it.

After cutting some back, before cleaning.

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

Nick climbed in with the welder, fixing the first Z-folded plate at the ends, then carefully welded it all together down the inner seam

Fitting and finesse first.

https://hosting.photobucket.com/imag...080&fit=bounds

Prepped for inside puddle welds.

https://hosting.photobucket.com/imag...080&fit=bounds

Weld next.

https://hosting.photobucket.com/imag...080&fit=bounds

After this, the outer plate was prepared for a load of puddle welds.

And welded on.

Patiently, with the use of multiple vise grips to prevent misplacing or distortion.

https://hosting.photobucket.com/imag...080&fit=bounds

Once fully welded it was left to cool off.

https://hosting.photobucket.com/imag...080&fit=bounds

At which point I got onto the welds, grinding them back to a decent finish.

https://hosting.photobucket.com/imag...080&fit=bounds

At this point it was 18.30 so we stopped welding, things seem to take a touch longer when you start to chase previous mistakes, bodges and have to custom fit things.

Part 2 of side 1 was to create a plate, again multi-contoured for the back section of the repair, looks easy, but a few aspects to considder.

https://hosting.photobucket.com/imag...080&fit=bounds

I made a CAD that works as a mirror, so both sides are created at the same time.

https://hosting.photobucket.com/imag...080&fit=bounds

Cut them out of the 1mm plate and started the shaping, which Nick completed with a hammer and dolly shaper on the vice.

Ready

https://hosting.photobucket.com/imag...080&fit=bounds

I will carry on with the welding as I get time after work this week

The preparation is what takes the most time.

And this is not an MOT bodge to squeeze another year or two from a car.

Have a good week.

Braunschweiger 10-10-2022 02:29 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Good job, typical for Japanese Cars, the technology lives forever, the Body rusts out from under your Butt. But you have it under Control.

Grizz1963 10-10-2022 03:38 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Quote:

Originally Posted by Braunschweiger (Post 9132601)
Good job, typical for Japanese Cars, the technology lives forever, the Body rusts out from under your Butt. But you have it under Control.

That is a very good description .

You are right.

Grizz1963 10-10-2022 03:40 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Got home from work and cooked dinner quickly, easy to heat up later

Then headed to the garage.

Unpacked tools.

I wanted to complete the rest of the drivers side rear arch repair.

https://hosting.photobucket.com/imag...080&fit=bounds

So I continued shaping the plate for starters.

https://hosting.photobucket.com/imag...080&fit=bounds

Offered up.

https://hosting.photobucket.com/imag...080&fit=bounds

Welded in three pieces to make up a total repair.

The used some seam sealer to tidy up the joins after grinding the welds back.

https://hosting.photobucket.com/imag...080&fit=bounds

Happy with that.

https://hosting.photobucket.com/imag...080&fit=bounds

Passenger side next, and then underseal for both sides once I mask the sills off to prevent overspray.

Need to hope the weather plays along.

Getting chilly already.

Grizz1963 10-12-2022 04:46 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Part 2.


Unfortunately, the welder stopped feeding wire just when I wanted to infill the gaps.


Job for another day.


The passenger side was an even worse bodge, aluminium plate glued in over holes etc.


So I cut back to good metal brutally and started by making a new inner panel to be a foundation.


https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds


Staggering……


https://hosting.photobucket.com/imag...080&fit=bounds


New back foundation.


https://hosting.photobucket.com/imag...080&fit=bounds


Hole got to be a lot bigger.


https://hosting.photobucket.com/imag...080&fit=bounds


https://hosting.photobucket.com/imag...080&fit=bounds


https://hosting.photobucket.com/imag...080&fit=bounds


More shaping due before I started welding it in.


https://hosting.photobucket.com/imag...080&fit=bounds



Decent puddle welds along the bottom edge, and tacks along the top.

At which point the welder stopped feeding the wire.

I am sure it may just be a tension setting.

But I had enough and decided it was time to come in, my eyes were tired and spotlight was messing with my vision.


https://hosting.photobucket.com/imag...080&fit=bounds


I packed away tools, which sometimes is the right thing to do.

And collected the excess material that had been removed so far to make it good.


Currently we have this.


Last MOT pass.


https://hosting.photobucket.com/imag...080&fit=bounds


Bit more to do, then I will be happy.

Grizz1963 10-12-2022 08:00 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
https://hosting.photobucket.com/imag...080&fit=bounds

Grizz1963 10-12-2022 04:37 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Got home after work and rechecked the welder, spool, feed etc, then pulled some of the wire out the tip……. Manually.

Sorted.

So I started where I left off last night, completing the welds as much as I could be bothered.

https://hosting.photobucket.com/imag...080&fit=bounds

Miles from concourse but plenty strong enough imho.

Followed by some seam sealer


https://hosting.photobucket.com/imag...080&fit=bounds


https://hosting.photobucket.com/imag...080&fit=bounds


So, hopefully the next MOT will be a decent pass.

Not quite as good as the last one after it failed on the points below.

https://hosting.photobucket.com/imag...080&fit=bounds

Bedtime.

Braunschweiger 10-13-2022 02:57 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Good work, there is the Stamp from the MOT.

Grizz1963 10-13-2022 12:32 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Quote:

Originally Posted by Braunschweiger (Post 9133467)
Good work, there is the Stamp from the MOT.

Thank you.

I could expose the test centre, but that is not my style.

There is a saying that the trap you set for another will catch you.

So if they are are tested, disciplined and rules made harder, I could suffer as well.

More important is my own conscience……… so I would not deliver such terrible work.

I always imagine my mother or if I had children, driving whatever I repair.

That is my standard and objective.










Quick easy job today.

Undersealed the sills, first the inner part and wheel arch.

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

Then masked off the complete sill.

https://hosting.photobucket.com/imag...080&fit=bounds

Body covered.

https://hosting.photobucket.com/imag...080&fit=bounds

Result.

https://hosting.photobucket.com/imag...080&fit=bounds

Happy so far.

More to come in a bit for the binge watchers.

.


All times are GMT -4. The time now is 04:47 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com