Re: 198Plus build by Alan's Classic
pics would help....my '80 with 1 1/4" rotors (73-80 are all 1 1/4") has a cut out in the backing plate where it meets the lower arm.
|
Re: 198Plus build by Alan's Classic
Nice talking to you tonight Joe.......Thanks so much for the help.......Now with my disc brake problem solved I'll be able to sleep tonight :dnd:
|
Re: 198Plus build by Alan's Classic
No problem Ronnie!
glad I could help ;) |
Re: 198Plus build by Alan's Classic
Do you have a pic or two?
Pics sometimes help to figure out what is what. Quote:
|
Re: 198Plus build by Alan's Classic
Finally got all the right part numbers for the disc brake swap.........It was a breeze with the right parts.......Motor going in this week.....:clap:
|
Re: 198Plus build by Alan's Classic
Bolted on my front wheels tonight........Sure is nice not having to look at those 6 lug drum brakes.......Still need to put my calipers on and get rid of these small tires.
http://i88.photobucket.com/albums/k1...1/100_2182.jpg |
Re: 198Plus build by Alan's Classic
Looks great!!
|
Re: 198Plus build by Alan's Classic
nice!!
are you gonna lower it any? |
Re: 198Plus build by Alan's Classic
Thanks Alan, it would look better at your shop getting finished !!!!!
Quote:
Quote:
|
Re: 198Plus build by Alan's Classic
Looken really good. Wish mine was that far along.
|
Re: 198Plus build by Alan's Classic
Quote:
|
Re: 198Plus build by Alan's Classic
Truck is really looking great congrats to all involved in getting her this far..
|
Re: 198Plus build by Alan's Classic
WOW looks great man
|
Re: 198Plus build by Alan's Classic
Have a question........If I use 2" drop springs for front will 4" drop springs in rear get the truck to set level.....Anyone have any pics of this combination
Thanks |
Re: 198Plus build by Alan's Classic
I would like to know the same thing. I have already purchased this combo. I have installed the front, but the motor is out so I can't really tell the difference.
|
Re: 198Plus build by Alan's Classic
This LINK might not be exactly what you want but it will be close.
|
Re: 198Plus build by Alan's Classic
Got to say Alan, that last picture on the initial page (4" / 6" DROP) is :metal:
|
Re: 198Plus build by Alan's Classic
Alan here's the link to the shop we talked about.........Just let me know what you think........Thank you Sir !!!!!!!!!
http://smithsprc.com/index.html |
Re: 198Plus build by Alan's Classic
Quote:
|
Re: 198Plus build by Alan's Classic
Sweet looking truck Ronnie!!!
|
Re: 198Plus build by Alan's Classic
Thanks, How did those wheels turn out ??????
Quote:
|
Re: 198Plus build by Alan's Classic
Well I installed my engine tonight, headers fit like a glove........But problems exist :banghead:
I was trying to keep from moving engine forward to next set of holes, But my valve covers hit the firewall with these tall valve covers plus these aluminum heads have a 1/4" raised lip on them......... I guess I'll use some short valve covers since these heads have the raised lips, they should clear the roller rockers. http://i88.photobucket.com/albums/k1...es1/motor2.jpg http://i88.photobucket.com/albums/k1...es1/motor3.jpg http://i88.photobucket.com/albums/k1...untitled-1.jpg |
Re: 198Plus build by Alan's Classic
looks good
|
Re: 198Plus build by Alan's Classic
Looks good, you could always dent the firewall in to clear.
|
Re: 198Plus build by Alan's Classic
no dont do that NO
|
All times are GMT -4. The time now is 02:48 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com