Re: The '67 Burb Build Thread
 

cant wait to see the bumper in primer! that way we can see how smooth it is!

Re: The '67 Burb Build Thread
 

its gonna need a little bit of filler work before its completely smooth ;)

Re: The '67 Burb Build Thread
 

no, the wheels will not go on ,like the axle is too big for them to go on .thanks again ron

Re: The '67 Burb Build Thread
 

so the axle is to wide, or the center bore is bigger on the axle than the rims??? sorry im trying to understand what you are saying. are the wheels stock escalade wheels, or aftermarket wheels that were on an escalade??

Re: The '67 Burb Build Thread
 

Re: The '67 Burb Build Thread
 

The center bore on axle is bigger then the wheel. They are factory optional wheels ,6 spoke like TT2s. Sorry I can't explain better thanks. Ron
Posted via Mobile Device

Re: The '67 Burb Build Thread
 

ahh ok i got it :)

in that case you have a few options.... you can either have the center bore on the wheel opened up to fit, or if you have the room you can run the spacer/adapter i was talking about a few posts up. you could also have the axle machined. or if its got long enough studs on the back, you could run just a small spacer to push them out just enough to clear the problem area.

well mine is converted to 5 lug but.....

the wheels on the front of mine i had to do something similar.... the center bore on the wheels on the front were to small, so i used an angle grinder to open the center bore a little hoping it would help, but it wasn't quite enough, so then i added a small spacer and presto.... perfect fit :)

as for the back they fit no problem, they just sat in to far because of the offset of the wheels, so to fix that i used one of the same pattern to same patter wheel adapter spacers

Re: The '67 Burb Build Thread
 

ok i will see if i can find some spacers thanks ron

Re: The '67 Burb Build Thread
 

oh no problem bro... glad i could be of some help :)

Re: The '67 Burb Build Thread
 

sprayed some rust convertor on the back and front side and brought it out in the sunlight for some better pics..

Attachment 790324

Attachment 790325

Attachment 790326

Attachment 790327

Attachment 790328

Re: The '67 Burb Build Thread
 

primered and guide coated..... needs some filler and block sanding now :smoke:
Attachment 790330

Attachment 790331

Re: The '67 Burb Build Thread
 

yes it does but other than that your doing fine!

Re: The '67 Burb Build Thread
 

:) its just been sitting, no time or money to do anymore work to it at the moment..... that, and i still need to trim and weld the frame rails back on, and cut and turn down the exhaust before i can install it. oh! and get some bumper bolts, not sure if i have any laying around or not....

Re: The '67 Burb Build Thread
 

finally got it home and out of my buddy budnikguy's storage yesterday. thanks for letting me leave it their as long as i did :)

Attachment 806541

Attachment 806542

and now today its in my garage where it will sit until i get a storage unit and then they both go into hibernation for a while......
Attachment 806543

Re: The '67 Burb Build Thread
 

hey, whats the roof for again?

Re: The '67 Burb Build Thread
 

well...... i have a few different ideas floating around in my head for it

1. roof skin swap :smoke:
2. 3" chopped top :sumo:
3. 3" chopped top with a big a$$ full length sliding rag top :devil:

Re: The '67 Burb Build Thread
 

updates??? :)



























































































































keep going ;)






















































































almost their :lol:































































pretty self explanatory :)
Attachment 808438

finally doing it right :mm:
Attachment 808439

tacked in...
Attachment 808440

key hole patch tacked in
Attachment 808441

some grindage...:ito:
Attachment 808442

Re: The '67 Burb Build Thread
 

good enough for now...
Attachment 808445

working on the 3rd door area
Attachment 808446

patch piece welded in
Attachment 808447

gas filler area cut out
Attachment 808448

patch panel made and fitted
Attachment 808449

Re: The '67 Burb Build Thread
 

welding it in
Attachment 808456

and some paint to keep it from rusting
Attachment 808457

here to :devil:.... their is no filler on these white areas, that will get done when all of the metal work is done on the rest of it ;)
Attachment 808458

Re: The '67 Burb Build Thread
 

nice work man...good welds. do you have a popper system setup already?

Re: The '67 Burb Build Thread
 

thanks, i made my buddy do it because i let him borrow my wheels to put on his bagged 70 caddy for a show a while back, and a photo shoot for his car clubs calendar last weekend or was it the weekend before last. anyways lol. and also because i don't have a mig welder :(. and nah no popper system setup yet, but i will later on down the road when the drivers door is shaved as well :). there are some low spots do to a little to much heat, but that will get addressed when its body work time. but that wont be for a while as i want to get all the metal work done first.

Re: The '67 Burb Build Thread
 

these sub's are starting to grow on me , maybe next project

Re: The '67 Burb Build Thread
 

:)

Re: The '67 Burb Build Thread
 

put some green paint on it because i was tired of seeing the white squares every time i walked into the garage :lol: ......

Attachment 814751

Attachment 814752

Re: The '67 Burb Build Thread
 

Very nice! Nice use of labor:metal: I try getting them over with food, and all they do is eat.

I think I'm gonna tackle the popper on my suicide 3rd door, on monday.