The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 24 of 55 « First 141920212223 24 252627282934 Last »
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   projects and builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=197)
-   -   Project two tone. (https://67-72chevytrucks.com/vboard/showthread.php?t=596643)

TJ's Chevy 04-13-2015 12:58 PM
Re: Project two tone.
 
Ok so TKO600 tremic is on its way. :metal:
Will be ordering my Classic Parts suspension kit here the end of this week. Also ordered the breathers for the 292 from Summit which should be here tomorrow. :metal:

Average Joe 04-13-2015 07:23 PM
Re: Project two tone.
 
TKO600.......Im jealous. That oughta be fun!

Ta2Don 04-13-2015 08:48 PM
Re: Project two tone.
 
6 Speed!!! :metal:

TJ's Chevy 04-13-2015 09:19 PM
Re: Project two tone.
 
Quote:
Originally Posted by Average Joe (Post 7131982)
TKO600.......Im jealous. That oughta be fun!
Oh yeah! 5 speed with a .82 od race 5th. Bang shift time! lol
Quote:
Originally Posted by Ta2Don (Post 7132101)
6 Speed!!! :metal:
5 speed brotha!!! lol :metal:

rusty76 04-14-2015 05:01 PM
Re: Project two tone.
 
I'm jealous.

Ta2Don 04-14-2015 10:32 PM
Re: Project two tone.
 
oops...:dohh:

TJ's Chevy 04-14-2015 11:35 PM
Re: Project two tone.
 
Quote:
Originally Posted by rusty76 (Post 7133247)
I'm jealous.
;)
Quote:
Originally Posted by Ta2Don (Post 7133731)
oops...:dohh:
:lol: :mm:

TJ's Chevy 04-15-2015 11:00 AM
Re: Project two tone.
 
4 Attachment(s)
Got my breathers in!!!! :metal::metal::metal: And MAN is that a perrty engine!!! MY OH MY! :chevy:

1963c-10 04-15-2015 11:57 AM
Re: Project two tone.
 
very nice!!!!

clemdaddy 04-15-2015 02:28 PM
Re: Project two tone.
 
that motor looks great and should push you along very nicely. and the 5-speed overdrive... thats all you need.

Bomp 04-15-2015 02:59 PM
Re: Project two tone.
 
Looks great.
Stabbed my 292 in CC and lovin it!

Hope you can drive it up this way in August.

TJ's Chevy 04-15-2015 08:59 PM
Re: Project two tone.
 
Quote:
Originally Posted by 1963c-10 (Post 7134218)
very nice!!!!
Thanks man!
Quote:
Originally Posted by clemdaddy (Post 7134389)
that motor looks great and should push you along very nicely. and the 5-speed overdrive... thats all you need.
Yep! Hoping so! lol Bang shiftin time! haha
Quote:
Originally Posted by Bomp (Post 7134423)
Looks great.
Stabbed my 292 in CC and lovin it!

Hope you can drive it up this way in August.
Hoping to for sure...may not drive the truck but me and Ta2Don are planning on making the trip. :metal:

Ta2Don 04-16-2015 08:30 AM
Re: Project two tone.
 
"Perrty" sums it up nicely...;)

TJ's Chevy 04-16-2015 11:24 AM
Re: Project two tone.
 
Quote:
Originally Posted by Ta2Don (Post 7135362)
"Perrty" sums it up nicely...;)
lol Thanks brotha!

greg65 04-16-2015 11:36 AM
Re: Project two tone.
 
Progress looks great. Nice color on the engine also.

rusty76 04-16-2015 04:39 PM
Re: Project two tone.
 
That does look good.

TJ's Chevy 04-16-2015 09:43 PM
Re: Project two tone.
 
Quote:
Originally Posted by greg65 (Post 7135513)
Progress looks great. Nice color on the engine also.
Quote:
Originally Posted by rusty76 (Post 7135910)
That does look good.
Thanks guys!

dwcardfan 04-18-2015 11:18 AM
Re: Project two tone.
 
The engine looks sweet!!!!

TJ's Chevy 04-28-2015 02:18 PM
Re: Project two tone.
 
2 Attachment(s)
Thanks DW! :metal:

Yeehaw!! All my suspension parts came in today! :bann:

Upper and lower ball joints, upper and lower control arm shafts and bushings, control arm shaft u-bolts, front and rear coil springs, coil spring retainer cups, front and rear shocks, axle to trailing arm u-bolts, rear stabilizer and rear trailing arm bushing kits, inner and outer tie rod ends, tie rod adjusting sleeves, idler and pitman arms. Not much left on the list as far as my rolling chassie goes. Will be ordering more parts this week end. :metal:

66Z71 04-28-2015 02:24 PM
Re: Project two tone.
 
Better than Christmas :)

1963c-10 04-28-2015 03:14 PM
Re: Project two tone.
 
Now you gotta get it all installed!!! The real fun begins.

Ta2Don 04-28-2015 06:28 PM
Re: Project two tone.
 
Quote:
Originally Posted by 66Z71 (Post 7151973)
Better than Christmas :)
Quote:
Originally Posted by 1963c-10 (Post 7152025)
Now you gotta get it all installed!!! The real fun begins.
Yeah, what they said...:haha:

Now for the Tranny to make it's appearance...

dwcardfan 04-28-2015 06:33 PM
Re: Project two tone.
 
Time to get to work. :metal::metal:

pimpston65 04-28-2015 07:31 PM
Re: Project two tone.
 
Quote:
Originally Posted by TJ's Chevy (Post 7151965)
Thanks DW! :metal:

Yeehaw!! All my suspension parts came in today! :bann:

Upper and lower ball joints, upper and lower control arm shafts and bushings, control arm shaft u-bolts, front and rear coil springs, coil spring retainer cups, front and rear shocks, axle to trailing arm u-bolts, rear stabilizer and rear trailing arm bushing kits, inner and outer tie rod ends, tie rod adjusting sleeves, idler and pitman arms. Not much left on the list as far as my rolling chassie goes. Will be ordering more parts this week end. :metal:
some one been saving them pennies!!! im sure the bill was nice and "FAT" yet the return is nicer when you get the parts...

TJ's Chevy 04-28-2015 09:14 PM
Re: Project two tone.
 
Quote:
Originally Posted by 66Z71 (Post 7151973)
Better than Christmas :)
Oh yeah! lol
Quote:
Originally Posted by 1963c-10 (Post 7152025)
Now you gotta get it all installed!!! The real fun begins.
Yep!!! Next month! :metal:
Quote:
Originally Posted by Ta2Don (Post 7152221)
Yeah, what they said...:haha:

Now for the Tranny to make it's appearance...
haha!!! Couple weeks yet on the tranny.
Quote:
Originally Posted by dwcardfan (Post 7152226)
Time to get to work. :metal::metal:
Waitin on paint! lol
Quote:
Originally Posted by pimpston65 (Post 7152290)
some one been saving them pennies!!! im sure the bill was nice and "FAT" yet the return is nicer when you get the parts...
$750 for it all. lol But yeah...once all the parts arrived it was worth it.


All times are GMT -4. The time now is 09:09 AM.
Page 24 of 55 « First 141920212223 24 252627282934 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com