Re: Working Man's Burbon
Quote:
|
Re: Working Man's Burbon
Quote:
|
Re: Working Man's Burbon
2 Attachment(s)
Quote:
|
Re: Working Man's Burbon
Ok thanks for the clarification ... Glad to hear this is how it works out.
|
Re: Working Man's Burbon
4 Attachment(s)
Some progress photos on the rear seats. Man I will say any savings GM saw when they went from a wood floor to a sheetmetal floor was more than eaten up by the 2nd row seats. There must be a hundred parts to them.
One really pleasant surprise has been how close the green upholstery and the powder coated seat backs match. I didn't have a sample of the new upholstery when I took the backs into be powder coated, so I just tried to match the old upholstery. I most certainly got lucky with that guess. |
Re: Working Man's Burbon
Seats seats seats seats ... Lets see some more seats seats seats =)
|
Re: Working Man's Burbon
5 Attachment(s)
Okay! Okay, I'm sorry! I've had some fastener issues to sort out.
The second row bottom seats had some rust on their frames which ruined some of the bolts. Fortunately although the threads in the frames were salvageable, five of the bolts were too rusted to use (Photo #1) and I did have 2 bolts that I twisted in two despite my best efforts. Being blind fasteners I had no way to get any heat on the nuts, even pentrating oil was almost impossible to get on the threads. Anyway not only did I need some bolts, I also needed some of the flanged spacers that GM used to prevent the bolts from being threaded in to far and distorting the backs. Most spacers were deformed from the bolts being over torqued (Probably with a mis-adjusted air ratchet.) Some of them were less than half as long as they should have been. My searches for another squarebody Burban at the u-pull-it yards didn't pay off. But I found some spacers that are used in cheap particleboard furniture that were almost perfect. I only had to drill the hole out. (See photo #2 the arrow shows a factory spacer with minor deforming, next to one of the furniture spacers.) Next was to make the new bolt heads match the original bolt heads (It's an OCD thing you may not have to worry about. :lol:) I chucked the replacement bolts up on the lathe and made a smooth, slight dome on the top of the bolt head. (Photo #3) Once all of that was done I just needed a day when it wasn't raining. Which was yesterday!:ennyd: I still need to remove the seat bottoms on both of the lower seats so I can loosen the bolts that hold them to the mounts. Hopefully then I can line them up better. Worst case I will have to take a grinder and slot the mounting holes. But I was happy with how they fit before so I'm guessing it is a tolerance stacking problem. The only disappointing thing was the 503 green paint I got to paint the seat back latches isn't 503 but Detroit Diesel engine green. UHGG! You can kinda see it in the back of the last photo. Expensive paint that sprayed out really nice. Anyone putting a 471 in their truck need some paint? And for CG's information the front seat is all the way back in the last photo. Now I have the whole seat belt dilemma to get figured out. |
Re: Working Man's Burbon
Wow...that's a slick looking install! I totally get the "matching bolt head" thing...you did a great job with that as well!
Woody |
Re: Working Man's Burbon
Today I'm 100 percent convinced I want to do the rear seat like yours now. I love it, and your upholstery looks awesome.
Course now I have to source a seat haha. I hate going to wrecking yards anymore, no Im not turning in my man card, just one of those things I did all the dang time when I was younger ... Over it haha. |
Re: Working Man's Burbon
Thanks everyone. It makes the 2 year wait worth it. I was just my luck to drop them off right before Covid took over.
|
Re: Working Man's Burbon
Quote:
|
Re: Working Man's Burbon
I like your seats. I had a set of Squarebody backseats ready for my '67 K/10 Suburban, but the rear floorpan was not deep enough for the seat back. Then that truck got totalled.
|
Re: Working Man's Burbon
Quote:
On the upside thank you for the kind words about the seats. |
Re: Working Man's Burbon
2 Attachment(s)
Quote:
It was ''totalled'' on paper by Farmers after an engine bay fire. Body is fine. With gas getting so high, I wasn't inclined to rebuild a BBC. My Sub now has a Salvage Title which would require a complete overhaul. With running trucks -- '68 C/10 Stepside and '71 GMC Jimmy -- I don't need a 3rd truck, especially with gas, insurance and maintenance. :waah: Set up was: 454/TH350/NP205/12 Bolt 3.73 w/Auburn Posi. The rear end was cannibalized into the Jimmy 12 years ago. The Stepside has the '67's horn button, hood letters ''E'', Voltage Regulator, and the hood latch, plus some odd signal lens screws. I have a 292 L6 core, an SM465/T221 core, a thrashed 1971 12 Bolt 3.73 Eaton Posi diff, and a partial Dana 44 front axle. Truck was originally rigged as 283/SM420/T221-?/12-Bolt open 3.73 -- I think. PO progressively up-gunned the motors... 283, 350, 454. And went automatic. :chevy: |
Re: Working Man's Burbon
Holy frijoles Batman! Your seats look incredible! Beautiful install as well!
To clarify more on my seat combo, I have 2004 Silverado seats in the front with the ‘86 rear. With this setup I’m a lil more forward with the rear seat folded flat. Having a 30” inseam it’s totally doable. Anyone taller may feel a bit cramped. YMMV :) |
Re: Working Man's Burbon
Thanks Joe. They are comfortable too!:mm:
And as always I appreciate the kind words. Not much else to report on, I put new front tires on 2 weeks ago and I've been driving around town searching for new fabric to replace the current fabric on the door panels, which should be the next project once the weather gets drier. The WMB is currently dirtier than it's ever been since I started driving it. It's either raining or freezing out. And just to complicate thngs I had Covid last month and my mother's apartment was flooded when the pipes in the ceiling froze and we had to move her into my sister's house and since have been working to dry her belongings out locate a new place for her to live. The odometer now shows 40k miles since I got the truck. Oh and I installed a clock in the WMB. My dad had a similar one in his K20 back in the day. And thank you to everyone who comes here and looks around. I'm finding it hard wrap my mind around the fact there has been 160,000 visits here. |
Re: Working Man's Burbon
1 Attachment(s)
The new clock!
|
Re: Working Man's Burbon
Quote:
LockDoc |
Re: Working Man's Burbon
Quote:
|
Re: Working Man's Burbon
Quote:
|
Re: Working Man's Burbon
Quote:
And it doesn't have military time readout on it... :) LockDoc . |
Re: Working Man's Burbon
Quote:
It clearly indicates 14:29. If it were 02:29 it would be dark, and you'd only see the lumimous hands. |
Re: Working Man's Burbon
Quote:
|
Re: Working Man's Burbon
Any way, The seats look great. :)
|
Re: Working Man's Burbon
Quote:
|
Re: Working Man's Burbon
[QUOTE='68OrangeSunshine;9176318]
Whaddya mean it doesn't? It clearly indicates 14:29. If it were 02:29 it would be dark, and you'd only see the lumimous hands.[/QUOTE Having spent most of my adult life working in the marine industry my brain is hard wired to the 24 clock. So for me what 68OrangeSunshine says is what I see . Correct with the exception of the luminous dial. I have to turn the dome light on sometimes. |
Re: Working Man's Burbon
Quote:
|
Re: Working Man's Burbon
[quote=HO455;9177262]
Quote:
The image of luminous hands was poetic license. |
Re: Working Man's Burbon
I think the watch is a neat period addition. I think if I ever actually get a truck on the road again Im gonna get one, but its going to be a Timex ... Keeps a licking and keeps on ticking.
And like the metric system, military time seems just out of my pea brain. |
Re: Working Man's Burbon
I don't think a watch would stay in that position very long the way I drive and use the sun visors.
In Arizona we have an active and agressive Sun. I often use the sunvisors against the glare of direct sun at or around Sunrise or Sunset. Even in winter. I pull it straight down if heading E/W into the sunlight or flip it 90* paralleling the window, N/S. Southbound, going Downtown in the morning -- breaking dawn in my eyes -- and Northbound, against the setting Sun in the late afternoon. A watch on a twist-o-flex type band might get flung off, and possibly fly out the window. |
Re: Working Man's Burbon
Not an issue for us natives of the PNW haha!
|
Re: Working Man's Burbon
Quote:
|
Re: Working Man's Burbon
Quote:
And on a different subject what is this thing "AC" everyone is always carrying on about? |
Re: Working Man's Burbon
Hmm, I believe this months truck of the month is green .. know anyone with driving something green? =)
|
Re: Working Man's Burbon
Quote:
Or did you mean A/C [air conditioning]? I don't have it. Not equipped on my '68 Stepside, which must've been a fleet truck. All manual, no frills. My '71 Jimmy was a Deluxe trim model: chrome-ringed windshield, chrome bumpers, chromed shift sticks, vinyl side panels in back, carpet, full gauge dash, and A/C [which was INOP when I bought it.] I took all the A/C parts off when I first got the Truck, and since have lost the bucket they were in. So it would cost a bunch to reinstall Air. A friend who has a Blazer himself, tells me in this climate, you won't feel the cold much even at full blast, the Blazer cabin being too big for factory air to be effective. Maybe it was more effective with R13, IDK. Around here A/C is for sissies. I don't like the HP loss. I used to have a bumper sticker -- THANK GOD FOR THE HEAT/ OR THE SNOWBIRDS WOULD BE HERE ALL YEAR LONG But after 2 decades of solar exposure, it's burned off. |
Re: Working Man's Burbon
1 Attachment(s)
HOT SUBURBAN SIGHTING!
Hot enough to melt snow and ice! |
Re: Working Man's Burbon
Quote:
What did you do catch it on fire? That's a big area compared to the other vehicles.... :) LockDoc |
Re: Working Man's Burbon
Okay you caught me. The real story is after it stopped snowing the wind started blowing. It blew a steady 10 -12 mph with gusts to 22. And due to a strange combination of wind direction, topography and the office building, the wind scowered that area of 7 inches of snow in about 6 hours.
The funny part is that is where I park at work. The local joke was I had made Mother Nature happy and she was returning the favor. |
Re: Working Man's Burbon
Quote:
:)... Now wait a minute. It always works just the opposite for me. I must be doing something wrong... :lol: LockDoc |
Re: Working Man's Burbon
|
All times are GMT -4. The time now is 01:06 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com