Re: ''Project '64 SYT Super Yenko Truck"
I dunno anyone have some input on what a used set of 3.08's would cost. I'll give you a nice green shinny $10 bill.
|
Re: ''Project '64 SYT Super Yenko Truck"
it also comes with the carier
do you need any shims? |
Re: ''Project '64 SYT Super Yenko Truck"
I'll need everything to put it back in. Just let me know what you come up with.
|
Re: ''Project '64 SYT Super Yenko Truck"
Heck if yall know how to build rearends you can put them back in one of the housings and set it up. and I'll swap you just rear ends since I haven't taken mine out if you want.
|
Re: ''Project '64 SYT Super Yenko Truck"
thats alright
no i dont really know how i did it on mine and it seems to work fine but i dont know all the backlash stuff or anything |
Re: ''Project '64 SYT Super Yenko Truck"
Heres a link for it...........Just download it..........Pretty neat.......
http://www.opanda.com/en/iexif/download.htm Quote:
|
Re: ''Project '64 SYT Super Yenko Truck"
Quote:
|
Re: ''Project '64 SYT Super Yenko Truck"
hmm. well if you can get everything together and let me know what you want for it. I may take a drive up one weekend!
|
Re: ''Project '64 SYT Super Yenko Truck"
alright
|
Re: ''Project '64 SYT Super Yenko Truck"
Quote:
what do yall think |
Re: ''Project '64 SYT Super Yenko Truck"
that exhaust sounds good on his nova, but it will be easier for you to just run true duals. plus it's a little better for racing and that's what your truck set up for.
|
Re: ''Project '64 SYT Super Yenko Truck"
yeah but theyre 104 dollars a piece
|
Re: ''Project '64 SYT Super Yenko Truck"
these outflow the flowmasters by a ton also
|
Re: ''Project '64 SYT Super Yenko Truck"
Yer gonna need bigger valves first:lol:
|
Re: ''Project '64 SYT Super Yenko Truck"
haha i know
and a turbo |
Re: ''Project '64 SYT Super Yenko Truck"
i have some 487 heads with the big chamber that would be good with a turbo
hmmmm................:D |
Re: ''Project '64 SYT Super Yenko Truck"
im trying to talk my dad into letting me take my truck down the dragstrip just to see what its gonna do
i need a windshield though anybody close got one they want to sell |
Re: ''Project '64 SYT Super Yenko Truck"
go get you some acrilic.
|
Re: ''Project '64 SYT Super Yenko Truck"
Oh and I bet you would only run a high 15
|
Re: ''Project '64 SYT Super Yenko Truck"
that would suck seeing that its an 1/8 mile track haha
whats acrylic |
Re: ''Project '64 SYT Super Yenko Truck"
it's a type of glass. like a really hard plastic that you can shape and bend with heat.
|
Re: ''Project '64 SYT Super Yenko Truck"
oh ive heard of lexan and i thought about using that for the rear glass
|
Re: ''Project '64 SYT Super Yenko Truck"
are motorcycle windshields acrylic
|
Re: ''Project '64 SYT Super Yenko Truck"
some are. well mine is anyway
|
Re: ''Project '64 SYT Super Yenko Truck"
Acrylic is easier to use then Lexan I believe, I put a Lexan window in my old ranger in the rear, and it sucked cutting it. but it can be done.
|
Re: ''Project '64 SYT Super Yenko Truck"
where do i get it
|
Re: ''Project '64 SYT Super Yenko Truck"
you might wanna research it dude and learn how to actually cut/mold it..
it can be an expensive mess up.. |
Re: ''Project '64 SYT Super Yenko Truck"
Lexan, Acrylic, Plexiglass, etc. They are all pretty much the same stuff, just different manufactures. It can be cut with a table saw pretty easily if you have a high tooth blade. Getting curves and what not is probably easiest with a router, or band saw. If you get too much heat the shavings tend to melt and clump up. It is not too bad to work with, as long as you take your time. I have made several tanks for our saltwater aquarium with it. I think a 1/4 4x8 sheet was a couple hundred bucks. You could probably get by with 1/8 for the truck.
|
Re: ''Project '64 SYT Super Yenko Truck"
um like i said does anybody have a windshield they want to sell
|
Re: ''Project '64 SYT Super Yenko Truck"
If you want to drive to Austin, you can pull the cracked one out of my 64 and have it for free. ;)
|
Re: ''Project '64 SYT Super Yenko Truck"
haha that doesnt sound real good
|
Re: ''Project '64 SYT Super Yenko Truck"
I have one on my parts truck.......I'll check it out and see what shape it's in.
Quote:
|
Re: ''Project '64 SYT Super Yenko Truck"
cool thanks :metal:
|
Re: ''Project '64 SYT Super Yenko Truck"
Great build glad i've finnaly found the time to completely read through the thread!
|
Re: ''Project '64 SYT Super Yenko Truck"
Chlsnk you should read mine then, it's only 2 pages. haha
|
Re: ''Project '64 SYT Super Yenko Truck"
i sent you a pm about the carrier and gears
|
Re: ''Project '64 SYT Super Yenko Truck"
truck is going to be cool, here is a pick of my 66 long bed. 489 BBC on juice runs 9.80's and still pounds the streets.lol
http://i8.photobucket.com/albums/a41.../Photo0113.jpg |
Re: ''Project '64 SYT Super Yenko Truck"
i like how you did the cowl
do you have any more pics of how you did that |
Re: ''Project '64 SYT Super Yenko Truck"
Brian,
I have a question. Did you end up using a factory latch on your cowl hood, or do you have it fastened some other way? |
Re: ''Project '64 SYT Super Yenko Truck"
Git busy Gage!!!!
|
All times are GMT -4. The time now is 04:07 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com