![]() |
Re: '64 chevy 2wd to 4wd
So if wanted to build a 62 short fleet side with 63-66 frame with a 61 grille what kits do I need to buy to piece it all together?
|
Re: '64 chevy 2wd to 4wd
1 Attachment(s)
Quote:
hey, if the paint job don't turn out, just throw it in some Super Clean or DOT 3 and give it another try. if you have a printer you could always print up some stripe decals. why not get 1 AMT '92 ford flareside, and 1 AMT '92 ford fleet snapper, cut the back wall off 1 cab and cut a bigger back half off the second cab to make your S/C. it's not really all that difficult to do and would line right up. you will need to use both int tubs for the stretch, if you get the snap kit, it will give you the longer frame you need as well a cheap snapper Attachment 1883459 |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
Quote:
is do-able, but not 100% accurate unless you do some grille mods, have not seen any '61 resin grilles around. i would use the AMT '60 chev for the cab and fleetside bed, and it has a pretty nicely detailed frame. lucky, amt is just re-releasing the '60 chev, with the go-kart Attachment 1883464Attachment 1883465 and the revell 64, 65 or 66 chev will give you the hood you need, and the frame you want (but i still think the '60's frame is nicer) Attachment 1883466 if you want to go cheap, i would just buy the '60 chev, and i got a later hood you can have... or if you want to go expensive, you could try find one of the super rare amt '62 chev or one of their even rarer '62 promo's, but then you have to shorten the box, it's an 8 footer. and too bad Modelhaus shut down, they were making a very nice resin '62 chev shortbox. rarely do i see them for sale, and they usually command a big buck Attachment 1883468Attachment 1883467 |
Re: '64 chevy 2wd to 4wd
Will the later revell hoods fit the amt 60 chevy good?
|
Re: '64 chevy 2wd to 4wd
2 Attachment(s)
there both 1/25 and fit perfectly. i have swapped numerous parts between these 2 kits
the only thing to make the later hood fit is to cut off the hood hinges, the '60 does not have pockets for the hinges Attachment 1883557Attachment 1883558 |
Re: '64 chevy 2wd to 4wd
Ok thank you.Now if i can just get make my models look as good as yours.
|
Re: '64 chevy 2wd to 4wd
4 Attachment(s)
thanks! but it's not that hard, just take your time.
when your done you can look at it and say "ya, i built that" :metal: finding time can be a hassle...between the crew and 3 puppies, i have'nt got a lot done on my Prowler...some leafs and axles, front jack and got the 2 long inside walls cut out... Attachment 1893732Attachment 1893733Attachment 1893734Attachment 1893735 |
Re: '64 chevy 2wd to 4wd
4 Attachment(s)
also been waiting on parts. cheap stuff from china, but slooow on the shipping...still waiting for my toilet...
started out with this dollhouse set-up the wifey found Attachment 1893739 lots of cutting and modifying, added a few other pieces, but i think it will work. got a few more cabinets to go in and have to make the table, benches and a rear bed. the loo will go beside the sink, trying to keep all the plumbing on one side. Attachment 1893736Attachment 1893737Attachment 1893738 |
Re: '64 chevy 2wd to 4wd
Looks great to me.....puppies are a lot of fun though. My girlfriend is looking for a new pup since current dog is about to turn twelve. My 2 year old grandson was plugging his nose today. He was asked why he was plugging it and he said "smells like gog yit". ......lol
|
Re: '64 chevy 2wd to 4wd
I know what you mean about not finding time. I think ive got the trucks to piece my plan together, but I'm so slow on cleaning the workbench of my other hobby (vintage chainsaws) to get started on it. I'm getting there though, I swear...
|
Re: '64 chevy 2wd to 4wd
4 Attachment(s)
Quote:
is "gog yit" 2 yr old-ese for doggy? lol. my son is almost 15 and has developed a total responsible attitude (finally!) and has really stepped up feeding, cleaning up, and walking the mutts...pretty sure he's hooked for life :metal: Quote:
been crawling along on my Prowler... not a lot, but still forward progress...lol got all the interior walls cut out, bench's & table made, rear bed in and been refining the cupboards and stuff. that empty spot between the sink and bed is for the crapper if it ever gets here Attachment 1897537Attachment 1897538 and what's a trailer without a ladder and roof rack. still need to make some roof hatch's and a vent for the stinkpipe Attachment 1897539Attachment 1897540 |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
might have noticed the wheelwell flares too.
all Prowlers had 'em Attachment 1897543 Attachment 1897544Attachment 1897545 here's some time consumed, fitting all these shelf's into a pantry, and i did find some 1/25 propane bottles online, but at $22 clams each....that's more than i got in the whole trailer...so, here's my rube bottles, like i said, made from plane bomber turrets, x-acto blade storage tubes and some scrap plastic. made them bigger than a 20 lb'er too, remember my dad having 40's on his trailer Attachment 1897546Attachment 1897547 |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
well this has been a slow build...problem after problem.
after waiting a couple months, some of the interior parts i ordered from fleabay never showed up, ebay says it was a scammer seller...so i'm making my own junk instead. Attachment 1910071 then i tried to find some 1970's era "harvest gold" paint for the appliances...good luck with that...only found 1 place and they don't ship paint over the border....so i mixed up 3 or 4 colors to try make my own... also painted the plastic to look like wood Attachment 1910075Attachment 1910076 and the tiny bit of decal paper i had is waaaay old. after 10 yrs or so it just does not want to work or stay together, plus i don't have pieces big enuff to do the stripes on the ext or the walls on the int.....waiting for some more to show up. did get a grey water tank in though Attachment 1910074 and my rottie puppy has developed a taste for styrene... (actually developed a taste for anything she can fit in her mouth...lol) spent hrs making louvers for the front window shade....then Roxie got it...i was able to salvage some of the louvers, but nothing else, so i made another one and made it smaller due to not having all the louvers. if you look close, there is still teeth marks in some louvers i need to fix... Attachment 1910077 |
Re: '64 chevy 2wd to 4wd
3 Attachment(s)
also had no luck in finding that "Prowler yellow" for the outside either...
ended up decanting some John deere yellow and mixed in some white. it's not accurate, but i think it'll work once the stripes go on Attachment 1910078 Attachment 1910079Attachment 1910080 |
Re: '64 chevy 2wd to 4wd
It's looking great!
|
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
thanks Dale!
pretty much got the prowler wrapped up. couple minor things to do...someday... Attachment 1916823Attachment 1916824Attachment 1916825Attachment 1916826Attachment 1916827 |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
|
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
Attachment 1916833Attachment 1916834
my dad had a '74 Impala similar to this... Attachment 1916838 only 74 impala kit i could find was two 74 promo's, for a couple hundred clams each...:crazy: but i do have a 70 Impala instead. but i used the bb in a truck, and part of the interior, but i found what i need for it on fleabay Attachment 1916836Attachment 1916837 |
Re: '64 chevy 2wd to 4wd
I think you nailed it on the trailer. It looks just like I remember them. I like the idea of the impala too. My mom had a 70 and then a 73. Thanks for the update!
|
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
wow...another long time..:lol:
well my impala did not pan out. the pieces i ordered off fleabay were not for an impala. but the guy refunded me and let me keep the parts :metal: after doing nuthin' with it for a few mos, i dug this gumby little model out. it's from the American 66 series of 5 cheesy '66 cars Hasegawa put out in the '80's. not much to them- no motor (curbside) dash is a flat piece with a decal dash, and about 30 or so pieces. i bought it as a started build for 5 clams back in the early '90's, but it was so lame, i did'nt put it together. only changes are towing mirrors and a hitch, and wider tires with diff wheels, orig tires were cracked in half. and my rottie pup chewed on it one day which pretty much destroyed the lower fender vents, so i just eliminated 'em for a quick cheesy model it dont look too bad in front of the prowler Attachment 1965733 Attachment 1965734Attachment 1965735 Attachment 1965736Attachment 1965737 |
Re: '64 chevy 2wd to 4wd
4 Attachment(s)
|
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
also been tooling around on this '51 chev bel air the wife found for 8 bucks at value village. no instructions and some pieces glued together
Attachment 1965743 i know it's not a truck, but i jacked it up anyways. stock int, and my modded int Attachment 1965744 Attachment 1965745Attachment 1965746 scratched a fr susp for it and flipped the rear springs Attachment 1965747 |
Re: '64 chevy 2wd to 4wd
4 Attachment(s)
doing it as a gasser
one a privateer could afford to build Attachment 1965748Attachment 1965749Attachment 1965750Attachment 1965751 |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
well i certainly expected to finish this one a long time ago, but it turned into one big cluster schmuck...
pieces of it started disappearing, rims and tires, windshield, my custom decals, the only set of fenderwell headers i had, the blower.....ripped my model room apart but could'nt find anything. then the wifey was tidying up around Roxie's bed and asked me if i knew where all this chewed up plastic came from.............:banghead: then i could'nt chrome anything, could'nt find my Molotow pen..... my Rottie has been on a chewing rip lately... custom chrome head, ear, foot and a blotch on the floor... Attachment 1973183Attachment 1973184Attachment 1973185 might have to ban her from the model room, she's been eating my reference material... Attachment 1973186 had planned on using this light metallic green i picked up, but after the loss of my custom decals, that whole plan went out the window... Attachment 1973187 |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
this one is the close-est i have come to chucking in the can. had to scratch the headers, make a fr window and a driveshaft. the other eaten parts i was able to replace. heck of a time making the body fit, Roxie chewed the firewall, but i was able to salvage it. then i guess my "eyeball engineering" was off a 64th. rollbar hit the top of my home made windshield. same wit the rad...and of course this is after everything is painted...said the hay with it and slapped some flat black on it and some decals from the parts box and called it a day...
Attachment 1973188Attachment 1973190Attachment 1973191Attachment 1973192Attachment 1973193 |
Re: '64 chevy 2wd to 4wd
4 Attachment(s)
|
Re: '64 chevy 2wd to 4wd
2 Attachment(s)
gonna save the met. green for this nova i got for christmas.
also got the big game jimmy too. right away i was going to make another crew with the tow truck body got last yr, but friggin revell...one is 1:24 and the other is 1:25. i'll do the nova and hold off on the trucks until i can get another cab-whatever size comes first Attachment 1973199Attachment 1973200 |
Re: '64 chevy 2wd to 4wd
It's been a while but it looks like you are getting some done. I like the Wildcat and faster. You have a lot of patience with your dogs.....
|
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
my wife got me the gmc wrecker and big game gmc last yr, but have'nt done nuthin' with them cause i couldn't find another donor at a reasonable cost.
wanted to do a crew outta the two, but one is 1/24 and one is 1/25. couple days ago was digging threw some crap and came across this old mangy cab from some project...and it's a 1/25 so it fits the wrecker cab. don't like the smooth rear cab either, found this rr cab wall from another junker Attachment 2079049 so the plan now is to crewcab the wrecker and break down and pay a stupid price for another big game so i can have a round eye crew, and get hawgs and t-cases for both trucks.went to a hobby shop 6 towns over prepared to pay a stupid price and wouldn't ya know it, they didn't have one...so to make it a not useless trip, i grabbed a '76 stepside sport. Attachment 2079048 since i want to put the wrecker body on a '60-'66 chev, i needed a box of some sort for it. after digging threw more junk (amazing what you can find after you've forgotten about it...) came across this stepper box. so now i will have a round eye crew stepper and a round eye longbox crew. piecing junk together.. Attachment 2079050 quick coat of primer to see how much more bodywork. also cut off that goofy visor and molded in "engine" will get a real visor and a real engine Attachment 2079051Attachment 2079052 |
Re: '64 chevy 2wd to 4wd
2 Attachment(s)
...kinda like this...
Attachment 2079053 the sport stepper will be stock except for some minor detailing. i have the engine finished for it and almost ready to paint the chassis Attachment 2079054 |
Re: '64 chevy 2wd to 4wd
It's nice to see you back at it. I like the direction you're going with this one.
|
Re: '64 chevy 2wd to 4wd
4 Attachment(s)
figured i would finish the 10 or 12 kits i already have. getting hard to justify spending $60-70 for a plastic model....literally being priced out of my hobby..:waah:
this is the chassis for the '76 sport stepside. just have to finish painting the body and jam it together. pretty much box stock wit some minor detailing. i see how sport steppers came in 4 colors, black, red, orange and blue. i like 'em all and could see it in any of them colors, so to decide i went and checked on my collection. got 4 black trucks, 7 red trucks, 2 orange trucks and 7 blue trucks...so i decided on orange with a 2 tone saddle and brown int. Attachment 2079848Attachment 2079849Attachment 2079851Attachment 2079852 |
All times are GMT -4. The time now is 08:48 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com