The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1947 - 1959 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=13)
-   -   What Did You Do With Your Truck Today ? (https://67-72chevytrucks.com/vboard/showthread.php?t=486137)

Trucknut57 07-01-2012 09:37 PM

Re: What Did You Do With Your Truck Today ?
 
After 1.5 years I finally got it started and drove it around the block. Found out I need to raise the bed about an inch to clear the shock mounts and I have to install some spacers on the rear end cause the rear tires are rubbing on the bed sides. Unfortunetly that means I have to get longer wheel studs, that sucks just when I thought I was close to getting to drive it again.

crossfire84 07-02-2012 11:01 AM

Re: What Did You Do With Your Truck Today ?
 
its 10.00 a.m. and its already 92 out side, and the garage is no better!:devil:

Trucknut57 07-02-2012 11:51 AM

Re: What Did You Do With Your Truck Today ?
 
Went from This:

http://img.photobucket.com/albums/v3...vytruck009.jpg

To this:

http://img.photobucket.com/albums/v3...630_122859.jpg

http://img.photobucket.com/albums/v3...630_122832.jpg

jmlcolorado 07-02-2012 12:34 PM

Re: What Did You Do With Your Truck Today ?
 
Im cheating. I have a 1950 (It fits the year requirements of the thread) International L110.
I moved the front frame brace back about 8" to shorten the frame horns.

Bent some 5/8" bar stock into ring to create a place to pass the frame brace through.

http://i526.photobucket.com/albums/c.../photo-180.jpg

http://i526.photobucket.com/albums/c.../photo-181.jpg

http://i526.photobucket.com/albums/c.../photo-182.jpg

http://i526.photobucket.com/albums/c.../photo-183.jpg

http://i526.photobucket.com/albums/c.../photo-184.jpg

http://i526.photobucket.com/albums/c.../photo-185.jpg

http://i526.photobucket.com/albums/c.../photo-186.jpg

http://i526.photobucket.com/albums/c.../photo-187.jpg

http://i526.photobucket.com/albums/c.../photo-188.jpg

http://i526.photobucket.com/albums/c.../photo-189.jpg

http://i526.photobucket.com/albums/c.../photo-190.jpg

crossfire84 07-02-2012 02:00 PM

Re: What Did You Do With Your Truck Today ?
 
WOW!!!:thumbs:

Stephanie 07-02-2012 03:56 PM

Re: What Did You Do With Your Truck Today ?
 
FINALLY got our 1949 engine jerry-rigged onto our engine stand! Can't wait to take it apart, clean it, and get it running again :D

http://i1157.photobucket.com/albums/...s/IMG_4626.jpg

Stephanie 07-02-2012 09:56 PM

Re: What Did You Do With Your Truck Today ?
 
I also got really bored when the power went out and created this fun way to stay motivated:

http://i1157.photobucket.com/albums/...s/IMG_4657.jpg

jmlcolorado 07-02-2012 09:58 PM

Re: What Did You Do With Your Truck Today ?
 
Quote:

Originally Posted by Stephanie (Post 5466026)
I also got really bored when the power went out and created this fun way to stay motivated:

http://i1157.photobucket.com/albums/...s/IMG_4657.jpg

You forgot the "achieved/postponed" check boxs under wedding ;)
Posted via Mobile Device

Stephanie 07-02-2012 10:14 PM

Re: What Did You Do With Your Truck Today ?
 
Quote:

Originally Posted by jmlcolorado (Post 5466032)
You forgot the "achieved/postponed" check boxs under wedding ;)
Posted via Mobile Device

Hahaha!! That is what the "must" is for. There is no backing out :lol:

crossfire84 07-03-2012 08:59 AM

Re: What Did You Do With Your Truck Today ?
 
2 Attachment(s)
Got up at 5a.m. and dropped the motor and trans in before the heat. Its 7:30 now and already 84.

1 bootlegger 07-03-2012 09:14 AM

Re: What Did You Do With Your Truck Today ?
 
Looks good crossfire84 with BB thier should be no shortage of torque or power. I live about 100 mi. north of you and found if I work with doors and windows closed fan running at floor level the humidity and heat isn't as bad.

mknittle 07-03-2012 09:19 AM

Re: What Did You Do With Your Truck Today ?
 
:lol:Getting ready for some overhead welding.:lol:

crossfire84 07-03-2012 08:00 PM

Re: What Did You Do With Your Truck Today ?
 
Quote:

Originally Posted by 1 bootlegger (Post 5466625)
Looks good crossfire84 with BB thier should be no shortage of torque or power. I live about 100 mi. north of you and found if I work with doors and windows closed fan running at floor level the humidity and heat isn't as bad.

thanks for the tip!

OrrieG 07-04-2012 12:34 AM

Re: What Did You Do With Your Truck Today ?
 
Scored a Presmog Qjet off a running truck for $30, it even came with the choke heat dog house (that I bought for my Chevelle for $20). Cleaned it up and will install tomorrow. This replaces the one I had put on it, but pulled when the Chevelle Holley went Tango Uniform. Also figured out the AC, just need to get a couple of bulkhead fittings and I can get the hoses done and the unit installed.

crossfire84 07-04-2012 04:39 PM

Re: What Did You Do With Your Truck Today ?
 
3 Attachment(s)
nothing, too darn hot, went to a local car show. here are a few shots.

mknittle 07-04-2012 09:28 PM

Re: What Did You Do With Your Truck Today ?
 
I looked at it.And tryed to introduce my wife to the DA sander, didn't have much luck though:lol:

mknittle 07-04-2012 09:46 PM

Re: What Did You Do With Your Truck Today ?
 
3 Attachment(s)
Really I just took some pictures. I finished the welding on the coil-over mounts and cleaned the rear end up a little yeasterday.

rollenhard 07-04-2012 10:12 PM

Re: What Did You Do With Your Truck Today ?
 
Looking sharp mknittle

Chevette 07-04-2012 10:48 PM

Re: What Did You Do With Your Truck Today ?
 
Quote:

Originally Posted by mknittle (Post 5469363)
Really I just took some pictures. I finished the welding on the coil-over mounts and cleaned the rear end up a little yeasterday.

Lookin' Good. What brand of coilover are you going to use?

mknittle 07-05-2012 09:21 AM

Re: What Did You Do With Your Truck Today ?
 
Thanks Rollenhard and chevette


Chevette,
I am using QA1 Alumamatics with 250# springs.

Russell Ashley 07-05-2012 03:05 PM

Re: What Did You Do With Your Truck Today ?
 
1 Attachment(s)
It's 96 here, still too hot to do any outside work but I did get my radiator overflow tank installed. This tank is out of a Ford van (can I use that word here, LOL) I just wandered around Pull-A-Part until I saw one that looked like I wanted. It fits good and only took a couple of "L" brackets to bolt it up. I also got a windshield washer bottle and pump out of an S-10 but haven't installed that yet.

72Mountaineer 07-06-2012 03:43 PM

Re: What Did You Do With Your Truck Today ?
 
I turned it upside down.

http://i24.photobucket.com/albums/c3...ORATION007.jpg

mknittle 07-06-2012 09:29 PM

Re: What Did You Do With Your Truck Today ?
 
I took the doors off And started working out a plan to replace rusty floor panels

lowdownstar 07-06-2012 09:51 PM

Re: What Did You Do With Your Truck Today ?
 
I installed the forward tilting hood kit last week now i am trying to work out a plan to build something the hold the hood in place with out that stupid rod it comes with. i think i can do it with a little plasma cuttting and some welding, god i love nice tools lol


Ray

Chevette 07-06-2012 10:12 PM

Re: What Did You Do With Your Truck Today ?
 
Quote:

Originally Posted by lowdownstar (Post 5472554)
I installed the forward tilting hood kit last week now i am trying to work out a plan to build something the hold the hood in place with out that stupid rod it comes with. i think i can do it with a little plasma cuttting and some welding, god i love nice tools lol


Ray

Yes, nice tools, cold beer (kept cold in one's beer fridge, stationed in the garage). Just wish the neighbors didn't like nice tools and cold beer so much. What brand of plasma cutter do you have. Mine is a Miller 675 Extreme. It works well. Good luck with your hood.

OrrieG 07-06-2012 11:02 PM

Re: What Did You Do With Your Truck Today ?
 
Dug out the stock window and door parts to start cleaning and fabing for one piece windows.

Chevette 07-06-2012 11:38 PM

Re: What Did You Do With Your Truck Today ?
 
Quote:

Originally Posted by OrrieG (Post 5472688)
Dug out the stock window and door parts to start cleaning and fabing for one piece windows.

I'd like to see some pics of that procedure. I have the one piece glass and the power assembly, but I don't have the channel and the seal/whiskers. I'll be paying attention and begging for pics.;)

mknittle 07-07-2012 09:40 AM

Re: What Did You Do With Your Truck Today ?
 
Quote:

Originally Posted by lowdownstar (Post 5472554)
I installed the forward tilting hood kit last week now i am trying to work out a plan to build something the hold the hood in place with out that stupid rod it comes with. i think i can do it with a little plasma cuttting and some welding, god i love nice tools lol


Ray

I saw one that used hatch gas cylinders.

coralhead 07-07-2012 09:55 AM

Re: What Did You Do With Your Truck Today ?
 
I am planning on looking at the truck through the kitchen window while drinking iced tea. Too blasted hot out and looking for 106 today in S Indiana. I did do some bed wood work this morning from 7-8:30.

Daze57 07-07-2012 11:56 AM

Re: What Did You Do With Your Truck Today ?
 
72 mountaineer

very interesting rotisserie for the cab!

Daze57 07-07-2012 11:58 AM

Re: What Did You Do With Your Truck Today ?
 
72 mountaineer

very interesting rotisserie for your cab -nice work

Daze57 07-07-2012 12:02 PM

Re: What Did You Do With Your Truck Today ?
 
sorry about the double posting

Trucknut57 07-07-2012 04:58 PM

Re: What Did You Do With Your Truck Today ?
 
I put the hood back on, made some wood blocks to get the bed steps level with the cab, took her around the block and smoked the tires just cause I can.

72Mountaineer 07-07-2012 05:05 PM

Re: What Did You Do With Your Truck Today ?
 
Quote:

Originally Posted by Daze57 (Post 5473243)
72 mountaineer

very interesting rotisserie for your cab -nice work

I borrowed it from a guy who built it for his '57 truck. Works great, will also do the frame.

Stephanie 07-07-2012 05:45 PM

Re: What Did You Do With Your Truck Today ?
 
While the hubby is away, the wifey will play! :D
I took off the rear fenders and went about setting up a game plan on how to get everything out of the bed... but still having trouble since everything is so rusted and decayed. Anyone have any good ideas on how to go about doing that?

http://i1157.photobucket.com/albums/...s/IMG_4957.jpg
http://i1157.photobucket.com/albums/...s/IMG_4928.jpg

Also, quickly realizing that our two car garage is quickly running out of room... Ugh.

OrrieG 07-07-2012 08:42 PM

Re: What Did You Do With Your Truck Today ?
 
1 Attachment(s)
Pull the bed or resign yourself to hours of quality time laying under there with a die grinder cutting off the bed strip bolts, there is about 50 or 60 of them, all rusted, recessed in the bed cross sills.

Today I wire wheeled, welded, and did body work on my bed strips. While the JB weld was setting I dug out the door parts and cleaned them. Glad I had rat holed away extra regulators and parts over the years, found out one of mine had a hidden repair that was failing. Need new rollers, otherwise in pretty good shape. Tomorrow am going to modify these parts for one piece windows.

lowdownstar 07-07-2012 09:08 PM

Re: What Did You Do With Your Truck Today ?
 
Quote:

Originally Posted by Chevette (Post 5472589)
Yes, nice tools, cold beer (kept cold in one's beer fridge, stationed in the garage). Just wish the neighbors didn't like nice tools and cold beer so much. What brand of plasma cutter do you have. Mine is a Miller 675 Extreme. It works well. Good luck with your hood.

I have one from eastwood i am not sure of the name but i picked up a tig welder at the same time they had a deal on both for $999. so i grab them. So far i am happy with both.

Ray

mknittle 07-08-2012 09:10 PM

Re: What Did You Do With Your Truck Today ?
 
Looked at it again.Planning on starting on the cab floor this week after my appointment with a doctor with a pareriscope on tuesday.

OrrieG 07-08-2012 11:04 PM

Re: What Did You Do With Your Truck Today ?
 
Primed bed rails, gave up 100 in the shade.
Posted via Mobile Device

Daze57 07-09-2012 01:18 AM

Re: What Did You Do With Your Truck Today ?
 
112 here today - sweater weather


All times are GMT -4. The time now is 01:24 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com