Re: 1963 C-10 in NC
 

Which exhaust kit did you purchase?

Re: 1963 C-10 in NC
 

I ordered the Thrush kit (although its all got Dynomax stickers) # WLK-89027 through Summit racing. Was $245.97 with free shipping. Did take about a week to arrive since it came from their west coast warehouse. Its a great looking kit and the pipes fit together nice. Don't know how it sounds yet, but we''' know in a few weeks. I'll run the mufflers that came with the kit, I can always change them if I don't like them. All hardware and the mufflers come with, but they do come with the flat style flange fittings for headers. I ordered some ball style flanges to go with my Hedman headers. Advertised for 1966 - 1972 small block and big block 2wd trucks, so I figured it couldn't be to far off of a fit for the 63.


http://www.summitracing.com/parts/wlk-89027/overview/

Re: 1963 C-10 in NC
 

Heres a few pics of our flash flood in the front yard last night. Got kinda close to the carport where the stepside is. Neighbors been there 55 years and says its been 25 years since its gotten that high here. I normally have about 6-8" of water and it takes almost 3' to crest the road like it did.

The pic of Hardees is about 10min down the road from me.

Re: 1963 C-10 in NC
 

Wow...didnt realize that much rain came through. It must've just missed us. Downtown Charleston is a mess when heavy rains come....glad I work from home!

Re: 1963 C-10 in NC
 

If you mentioned it and I missed it I am sorry to ask, but could you tell me what exhaust kit you ordered?

Re: 1963 C-10 in NC
 

Yeah, we got a bunch here. Went from dead calm to 50mph winds, then the rain came, then the quarter and dime size hail, thunder storm....and the rain just kept coming. Visibility driving home was around 20-30' at most. But got home safely. They say we have more coming today.

Re: 1963 C-10 in NC
 

No problem.......check post 922 for all the info on the exhaust kit. Its a really nice kit and you can't beat the price for full exhaust, mufflers and hardware. And the H pipe is already welded.

Re: 1963 C-10 in NC
 

That's the same one I have been looking at for a while now. I'm looking forward to hearing how you like it once you install the kit.

Re: 1963 C-10 in NC
 

I'll be sure to take pics of the install and let everyone know how the fitment is. The header reducers came in last night. They are from Hedman....so a nice quality part.

I also have your hydraulic clutch conversion and brake mc kit to install. Its been in a box for almost 3 years, but still have it and it will be used. The Novak kit will round out the hydraulic clutch.

Re: 1963 C-10 in NC
 

Ordered the last two pieces for the exhaust. The reducers the 1st pieces of exhaust pipe are both 2.5" so they require a butt joint clamp. No biggie.....$6.97 each made from stainless steel and come w/grade 8 bolts. The exhaust can be welded also, but I'm going to clamp mine. Summit Part # 693250

http://www.summitracing.com/parts/sum-693250/overview/

I would have preferred a lap joint like the rest of the exhaust, but it wasn't an option when getting the header reducers....so butt joint it is.

Re: 1963 C-10 in NC
 

IMO the band clamps are the best way to go on all the joints. They don't deform the tube like the u-bolt clamps, so you can disassemble the joints if so desired.

Re: 1963 C-10 in NC
 

Its gonna need lots and lots of grey exhaust goo....at least mine would.

Re: 1963 C-10 in NC
 

hmmm....ive been wondering about the clamps over the ubolts. maybe i'll order some more to finish up the system. summit says they don't require anything to seal, but the goo may be an added benefit to ensure a good seal. it will clean up easy too. thanks guys.

Re: 1963 C-10 in NC
 

I'm getting excited on seeing this exhaust put together! :metal:

Re: 1963 C-10 in NC
 

me too.....

spent most of the day prepping the fleetside front frame and firewall for paint so i can take the front end off the stepside and get it mounted. i have another front end for the stepside. will probably do the piller/floor/cab corner work too while its off on the driver side. the cab mounts look horrible on the driver side. i already have gm sheetmetal to replace it all.

Re: 1963 C-10 in NC
 

got the factory tow hooks on. stepside on hold until next wweekend. got a set of hands to help pull the front end. got a bunch done on the fleetside today. will get some pics up tomorrow, my computers having issues.

Re: 1963 C-10 in NC
 

I too am keen to follow the exhaust install when you get to that point

Re: 1963 C-10 in NC
 

Couple of picks of the front tow hooks....don't mind the driver side bumper being slightly off and the dirty chrome..just put it back on for mock up, but they will come back off this week.

Re: 1963 C-10 in NC
 

Very nice! :metal:

Re: 1963 C-10 in NC
 

Thanks TJ

Re: 1963 C-10 in NC
 

Was late when I got home. But had enough time to get the clutch covers sprayed. Not much, but even the little stuff counts.

Re: 1963 C-10 in NC
 

Nice!!! :metal:

Re: 1963 C-10 in NC
 

One more project done....

Re: 1963 C-10 in NC
 

Even the small stuff adds up...:uhmk:

Very Nice! :metal:

Re: 1963 C-10 in NC
 

I wouldn't be where I'm at without the small projects. Especially with our last winter and until the barn is complete. But like most projects....some of the small ones can get very tedious too.

Re: 1963 C-10 in NC
 

Believe I'da sprayed that there with Rustolem Central Carolina Dirt Color, the kind that comes out the can flecked with oil spots.

Less cleanin down the road!

Looks great.

Re: 1963 C-10 in NC
 

haha....i hear you there. actually the factory paint held up really good. but i can't leave well enough alone and it'd look off with everything else being painted. so a quick scuff, degrease and couple of coats later....

its getting there though, one piece at a time.

Re: 1963 C-10 in NC
 

I have a couple spray bombs of that there dirt color........just sayin.....

Re: 1963 C-10 in NC
 

haha...I'll keep that in mind.

Re: 1963 C-10 in NC
 

Went by Wilson Off Road in Fayetteville today. They are the go to guys for anything gearbox or 4x4 related. He's going to do my posi conversion for me. $300 for time and labor plus the rebuild kit (just new seals, fluids, shims and seals). I've already had the posi rebuilt and carrier bearings pressed on. And 3-4 day turn around time. So the rear rend will come out here in the next few weeks and get rebuilt. Be nice to have both wheels move under the big block. .......or should I say spin?

Re: 1963 C-10 in NC
 

Two healthy gal friends with a sack o corn fer each out back and them tires'll hook up just dandy. Ask me how I know!

I'd post ya up a picture but I'd get grumped at by the mods again and they'd have a deal of a time for three days goin once more thru all my threads lookin for beer tap boobies or machine gun boobies and the like....again..... I think I'll give em a break.

Re: 1963 C-10 in NC
 

Well, now that you have our attention....

Re: 1963 C-10 in NC
 

haha....i think you mean the photo of the two in the back of the ford truck....that pic got me in trouble with the mods too.

maybe a couple hunks of railroad tie in the bed...haha

Re: 1963 C-10 in NC
 

Well, if someone ever builds a truck wif boobies on it and posts a pic here....theys liable ta get banned!

Re: 1963 C-10 in NC
 

You mean like this:
Attachment 1251726

???????

Or is that just too much this early in the morning?
Sorry, could not resist.
True fact though..... :metal:

Re: 1963 C-10 in NC
 

haha....

did find a pic of a very odd tire wall issue. Anyone ever seen this happen? I don't know that I'd want to change this one personally.

Re: 1963 C-10 in NC
 

That reminds me a someone with there eyes wide and there mouth dropped waaay oped after seeing a corvette do 200 mph! LOL! HAHA! :chevy:

Re: 1963 C-10 in NC
 

I can see that....I've heard a lot of horror stories of taking off bad tires on big trucks.

Re: 1963 C-10 in NC
 

Been a few weeks of being very busy, but back on the stepside tonight. Got new cab mounts enroute (just ordered some for the fleetside too). Will work on getting the front crossmember out after work this week and the new one in. Also need to mock up and drill the mounts for the front sway bar. Then frame trimming for the headers and we'll drop in the engine to see where else we need more clearance.

Did get some time to mount the captain fab clutch and brake cylinder bracket, will get pics tonight. Just a little frame work left on the stepside and it'll be ready for paint.

Re: 1963 C-10 in NC
 

That there looks a bit like Ol John Lee's faded blue tailgate on the left!